Function Prod_Ver_Actions(Action, CalcColName, FSList, Handle, Name, FMC, Record, Status, OrigRecord, Param1, Param2, Param3, Param4, Param5, Param6, Param7, Param8, Param9, Param10) /*********************************************************************************************************************** This program is proprietary and is not to be used by or disclosed to others, nor is it to be copied without written permission from Infineon. Name : Prod_Ver_Actions Description : Handles calculated columns and MFS calls for the current table. Notes : This function uses @ID, @RECORD, and @DICT to make sure {ColumnName} references work correctly. If called from outside of a calculated column these will need to be set and restored. Parameters : Action [in] -- Name of the action to be taken CalcColName [in] -- Name of the calculated column that needs to be processed. Normally this should only be populated when the CalcField action is being used. FSList [in] -- The list of MFSs and the BFS name for the current file or volume. This is an @SVM delimited array, with the current MFS name as the first value in the array, and the BFS name as the last value. Normally set by a calling MFS. Handle [in] -- The file handle of the file or media map being accessed. Note, this does contain the entire handle structure that the Basic+ Open statement would provide. Normally set by a calling MFS. Name [in] -- The name (key) of the record or file being accessed. Normally set by a calling MFS. FMC [in] -- Various functions. Normally set by a calling MFS. Record [in] -- The entire record (for record-oriented functions) or a newly-created handle (for "get handle" functions). Normally set by a calling MFS. Status [in/out] -- Indicator of the success or failure of an action. Normally set by the calling MFS but for some actions can be set by the action handler to indicate failure. OrigRecord [in] -- Original content of the record being processed by the current action. This is automatically being assigned by the WRITE_RECORD and DELETE_RECORD actions within BASE_MFS. Param1-10 [in/out] -- Additional request parameter holders ActionFlow [out] -- Used to control the action chain (see the ACTION_SETUP insert for more information.) Can also be used to return a special value, such as the results of the CalcField method. History : (Date, Initials, Notes) 07/28/10 dmb Original programmer. 10/13/10 dmb Fix logic to extract the file handle if file has an index 03/26/11 dmb Add logic to save and restore @FILE.ERROR ***********************************************************************************************************************/ #pragma precomp SRP_PreCompiler $insert LOGICAL $insert FILE.SYSTEM.EQUATES $insert ACTION_SETUP $insert GAN_PARAM_CONFIG_EQUATES $insert GAN_PARAMS_EQUATES Declare Function Database_Services, Gan_Services, Error_Services, SRP_Array Declare Subroutine Database_Services If KeyID then GoSub Initialize_System_Variables Begin Case Case Action _EQC 'CalcField' ; GoSub Calc_Field Case Action _EQC 'READ_RECORD_PRE' ; GoSub READ_RECORD_PRE Case Action _EQC 'READ_RECORD' ; GoSub READ_RECORD Case Action _EQC 'READONLY_RECORD_PRE' ; GoSub READONLY_RECORD_PRE Case Action _EQC 'READONLY_RECORD' ; GoSub READONLY_RECORD Case Action _EQC 'WRITE_RECORD_PRE' ; GoSub WRITE_RECORD_PRE Case Action _EQC 'WRITE_RECORD' ; GoSub WRITE_RECORD Case Action _EQC 'DELETE_RECORD_PRE' ; GoSub DELETE_RECORD_PRE Case Action _EQC 'DELETE_RECORD' ; GoSub DELETE_RECORD Case Otherwise$ ; Status = 'Invalid Action' End Case If KeyID then GoSub Restore_System_Variables If Assigned(ActionFlow) else ActionFlow = ACTION_CONTINUE$ Return ActionFlow // ----- Calculated Columns -------------------------------------------------------------------------------------------- // // The typical structure of a calculated column will look like this: // // Declare function TableName_Actions // // A = {COL1} ; * Reference as many data columns in this way to ensure the dictionary dependency is generated. // // @ANS = TableName_Actions('CalcField', 'CalcColName') // // --------------------------------------------------------------------------------------------------------------------- Calc_Field: // Make sure the ActionFlow return variable is cleared in case nothing is calculated. ActionFlow = '' Begin Case Case CalcColName EQ 'EXPORT_CONTROL' ; GoSub EXPORT_CONTROL End Case return EXPORT_CONTROL: PartNum = {EPI_PART_NO} ExportControl = Xlate('EPI_PART', PartNum, 'EXPORT_CONTROL', 'X') If ExportControl NE True$ then ExportControl = False$ ActionFlow = ExportControl return // ----- MFS calls ----------------------------------------------------------------------------------------------------- READ_RECORD_PRE: // In order to stop a record from being read in this action these lines of code must be used: // // OrigFileError = 100 : @FM : KeyID // Status = 0 // Record = '' // ActionFlow = ACTION_STOP$ return READ_RECORD: // In order to stop a record from being read in this action these lines of code must be used: // // OrigFileError = 100 : @FM : KeyID // Status = 0 // Record = '' return READONLY_RECORD_PRE: // In order to stop a record from being read in this action these lines of code must be used: // // OrigFileError = 100 : @FM : KeyID // Status = 0 // Record = '' // ActionFlow = ACTION_STOP$ return READONLY_RECORD: // In order to stop a record from being read in this action these lines of code must be used: // // OrigFileError = 100 : @FM : KeyID // Status = 0 // Record = '' return WRITE_RECORD_PRE: return WRITE_RECORD: PSNo = {PROC_STEP_PSN} ReactorType = {REACT_TYPE} TechType = Xlate('PROD_SPEC', PSNo, 'TECH_TYPE', 'X') If ( (ReactorType EQ 'GAN') and (TechType EQ 'P') ) then // Automatically create GAN_PARAM_CONFIG and GAN_PARAMS records if an Epi Part Number exists. // Can't check if CURR_PART_NO has changed because it is calculated. // Instead we will have to check if a CURR_PART_NO exists and if GAN_PARAM_CONFIG records exist for it. CurrPartNo = {EPI_PART_NO} If CurrPartNo NE '' then // Create GAN_PARAM_CONFIG records if they do not exist GaNParamStages = Database_Services('ReadDataRow', 'APP_INFO', 'GAN_PARAM_STAGES') GaNParamConfigKeys = '' For each Stage in GaNParamStages using @VM setting StageIndex GaNParamConfigKeys = PSNo:'*':CurrPartNo:'*':Stage Next Stage If RowExists('GAN_PARAM_CONFIG', GaNParamConfigKeys) then // GAN_PARAM_CONFIG records exist. Just need to ensure Candela Total Defects is enabled. CanParamConfigKey = PSNo:'*':CurrPartNo:'*CAN_PRE' CanParamConfigRec = Database_Services('ReadDataRow', 'GAN_PARAM_CONFIG', CanParamConfigKey) If Error_Services('NoError') then MetNames = CanParamConfigRec Locate 'Candela Total Defects' in MetNames using @VM setting vPos then CandelaTotalDefectsEnabled = CanParamConfigRec If CandelaTotalDefectsEnabled EQ False$ then CanParamConfigRec = True$ Database_Services('WriteDataRow', 'GAN_PARAM_CONFIG', CanParamConfigKey, CanParamConfigRec, True$, False$, True$) end end end CanParamConfigKey = PSNo:'*':CurrPartNo:'*CAN_PST' CanParamConfigRec = Database_Services('ReadDataRow', 'GAN_PARAM_CONFIG', CanParamConfigKey) If Error_Services('NoError') then MetNames = CanParamConfigRec Locate 'Candela Total Defects Post' in MetNames using @VM setting vPos then CandelaTotalDefectsEnabled = CanParamConfigRec If CandelaTotalDefectsEnabled EQ False$ then CanParamConfigRec = True$ Database_Services('WriteDataRow', 'GAN_PARAM_CONFIG', CanParamConfigKey, CanParamConfigRec, True$, False$, True$) end end end end else // One or more GAN_PARAM_CONFIG records do not exist, so create them now. ParameterList = Gan_Services('GetCurrPartParams', CurrPartNo) For each Stage in GaNParamStages using @VM setting StageIndex ParamConfigKey = PSNo:'*':CurrPartNo:'*':Stage If (RowExists('GAN_PARAM_CONFIG', ParamConfigKey) EQ False$) then ParamConfigRec = ParameterList Convert @VM:@SVM to @FM:@VM in ParamConfigRec ParamConfigRec = SRP_Array('Rotate', ParamConfigRec, @FM, @VM) ThisParamList = ParamConfigRec // Enable Candela Total Defects. For each Param in ThisParamList using @VM setting ParamPos If ( (Param NE 'Candela Total Defects') and (Param NE 'Candela Total Defects Post') ) then ParamConfigRec = False$ end else ParamConfigRec = True$ end Next Param Database_Services('WriteDataRow', 'GAN_PARAM_CONFIG', ParamConfigKey, ParamConfigRec, True$, False$, True$) end else If ( (Stage EQ 'CAN') or (Stage EQ 'CAN_PRE') or (Stage EQ 'CAN_PST') ) then CanParamConfigRec = Database_Services('ReadDataRow', 'GAN_PARAM_CONFIG', ParamConfigKey) If Error_Services('NoError') then MetNames = CanParamConfigRec Locate 'Candela Total Defects' in MetNames using @VM setting vPos then CandelaTotalDefectsEnabled = CanParamConfigRec If CandelaTotalDefectsEnabled EQ False$ then CanParamConfigRec = True$ Database_Services('WriteDataRow', 'GAN_PARAM_CONFIG', CanParamConfigKey, CanParamConfigRec, True$, False$, True$) end end Locate 'Candela Total Defects Post' in MetNames using @VM setting vPos then CandelaTotalDefectsEnabled = CanParamConfigRec If CandelaTotalDefectsEnabled EQ False$ then CanParamConfigRec = True$ Database_Services('WriteDataRow', 'GAN_PARAM_CONFIG', CanParamConfigKey, CanParamConfigRec, True$, False$, True$) end end end end end Next Stage end end end return DELETE_RECORD_PRE: return DELETE_RECORD: return // ----- Internal Methods ---------------------------------------------------------------------------------------------- Initialize_System_Variables: // Save these for restoration later SaveDict = @DICT SaveID = @ID SaveRecord = @RECORD OrigFileError = @FILE.ERROR // Now make sure @DICT, ID, and @RECORD are populated CurrentDictName = '' If @DICT then DictHandle = @DICT<1, 2> Locate DictHandle in @TABLES(5) Using @FM Setting fPos then CurrentDictName = Field(@TABLES(0), @FM, fPos, 1) end end If CurrentDictName NE DictName then Open DictName to @DICT else Status = 'Unable to initialize @DICT' end @ID = KeyID If Record else // Record might not have been passed in. Read the record from the database table just to make sure. @FILE.ERROR = '' Open TableName to hTable then FullFSList = hTable[1, 'F' : @VM] BFS = FullFSList[-1, 'B' : @SVM] LastHandle = hTable[-1, 'B' : \0D\] FileHandle = \0D\ : LastHandle[1, @VM] Call @BFS(READO.RECORD, BFS, FileHandle, KeyID, FMC, Record, ReadOStatus) end end @RECORD = Record return Restore_System_Variables: Transfer SaveDict to @DICT Transfer SaveID to @ID Transfer SaveRecord to @RECORD @FILE.ERROR = OrigFileError return