Compile function Lot_Services(@Service, @Params)
#pragma precomp SRP_PreCompiler

Declare function TEST_WAFER_PROD_SERVICES, SRP_Datetime, Datetime, Database_Services, Lot_Services, Error_Services, RTI_CREATEGUID
Declare function SRP_Array, SRP_Json, Environment_Services, Logging_Services
Declare subroutine Database_Services, Btree.Extract, Lot_Services, Error_Services, Labeling_Services, SRP_Json, Logging_Services
Declare subroutine SRP_Run_Command
$insert APP_INSERTS
$Insert LOT_EQUATES
$Insert TEST_WAFER_PROD_EQUATES
$Insert Lot_Operation_Equates
$Insert PRODUCT_OPERATION_EQUATES
$Insert LOT_EVENT_EQUATES

LogPath      = Environment_Services('GetApplicationRootPath') : '\LogFiles\Lot'
LogDate      = Oconv(Date(), 'D4/')
LogTime      = Oconv(Time(), 'MTS')
LoggingDTM   = LogDate : ' ' : LogTime   ; // Logging DTM

LogFileName      = LogDate[7, 4] : '-' : LogDate[1, 2] : '-' : LogDate[4, 2] : ' TestWaferLotCreation.csv'
Headers          = 'Logging DTM' : @FM : 'Product Name' : @FM : 'Username' : @FM : 'Message'
objTWCreationLog = Logging_Services('NewLog', LogPath, LogFileName, CRLF$, ',', Headers, '', False$, False$)

LogFileName   = LogDate[7, 4] : '-' : LogDate[1, 2] : '-' : LogDate[4, 2] : ' LotMove.csv'
Headers       = 'Logging DTM' : @FM : 'Lot Id' : @FM : 'Username' : @FM : 'Message'
objLotMoveLog = Logging_Services('NewLog', LogPath, LogFileName, CRLF$, ',', Headers, '', False$, False$)

LogFileName    = LogDate[7, 4] : '-' : LogDate[1, 2] : '-' : LogDate[4, 2] : ' LotEvent.csv'
Headers        = 'Logging DTM' : @FM : 'Lot Id' : @FM : 'Event Type' : @FM : 'Operator' : @FM : 'Begin Wafer Qty' : @FM : 'End Wafer Qty' : @FM : 'Bonus Wafer Qty' : @FM : 'Reduce Wafer Qty' : @FM : 'Message'
objLotEventLog = Logging_Services('NewLog', LogPath, LogFileName, CRLF$, ',', Headers, '', False$, False$)

Options EVENT_TYPES = 'MOVE_IN', 'MOVE_OUT', 'HOLD_ON', 'HOLD_OFF', 'REDUCE_WAFER_QTY', 'BONUS_WAFER_QTY', 'COMMENT', 'LOCATION', 'LOAD', 'UNSIGN_LOAD', 'TW_USE', 'CLOSE'
Options LOT_TYPES = 'TW', 'RDS', 'WM_OUT', 'WM_IN'

GoToService

Return Response or ""

//-----------------------------------------------------------------------------
// SERVICES
//-----------------------------------------------------------------------------

Service GenerateNewLotId(LotType)
    NewLotID = ''
    RightNow = Datetime()
    If LotType NE '' then
        ValidLotNum    = False$
        GeneratedLotID = ''
        Begin Case
            Case LotType EQ 'TW'
                Loop
                    Until ValidLotNum EQ True$
                    LotPrefix = 'TW'
                    LotYear   = SRP_Datetime('Year', RightNow)
                    LotMonth  = SRP_Datetime('Month', RightNow)
                    LotDay    = SRP_Datetime('Day', RightNow)
                    LotTime   = SRP_Datetime('Time', RightNow)
                    
                    GeneratedLotId = LotPrefix : LotYear : LotMonth : LotDay : LotTime
                    If Not(RowExists('LOT', GeneratedLotId)) then
                        ValidLotNum = True$
                    end else
                        ValidLotNum = False$
                        RightNow    = Datetime()
                    end
                Repeat
            Case OTHERWISE$
                //null
        End Case
        If GeneratedLotID NE '' AND ValidLotNum then
            //Write the new lot id now so it's reserved
            Database_Services('WriteDataRow', 'LOT', GeneratedLotID, '')
            If RowExists('LOT', GeneratedLotID) then
                NewLotID = GeneratedLotID
            end
        end
    end
    Response = NewLotID
end service


Service CreateNewLot(LotType, ProdName, LotQty, VendorPartNo, VendorLotNo, VendorCode, Username, PrinterID, LotId)
    CreatedLotNumber = ''
    ErrorMessage     = ''
    Begin Case
    	Case LotType EQ 'RDS'
			NewLotId = LotId
			If NewLotId NE '' then
				If RowExists('LOT', NewLotId) EQ False$ then
					LotRec                      = ''					
					LotRec<LOT_TYPE$>           = LotType
					LotRec<LOT_PROD_ID$>        = ''
					LotRec<LOT_ORIG_WAFER_QTY$> = LotQty
					LotRec<LOT_WAFER_QTY$>      = LotQty
					LotRec<LOT_VENDOR_PART_NO$> = VendorPartNo
					LotRec<LOT_VENDOR_LOT_NO$>  = VendorLotNo
					LotRec<LOT_VENDOR_CODE$>    = VendorCode
					Database_Services('WriteDataRow', 'LOT', NewLotId, LotRec)
					If Error_Services('HasError') then
						ErrorMessage = 'Error in ':Service:' service. ':Error_Services('GetMessage')
					end
				end else
					ErrorMessage = 'Error in ':Service:' service. LOT record "':NewLotId:'" already exists.'
				end
			end else
				ErrorMessage = 'Error in ':Service:' service. No lot ID passed in.'
			end
    	Case LotType EQ 'TW'
			If ProdName NE '' then
				TWProdID = Test_Wafer_Prod_Services('GetTestWaferProdIDsByPartName', ProdName)
				If TWProdID NE '' then
					If DCount(TWProdID, @VM) EQ 1 then
						NewLotId = Lot_Services('GenerateNewLotId', 'TW');//Don't use this
						If NewLotId NE '' then
							If RowExists('LOT', NewLotId) then
								LotRec = Database_Services('ReadDataRow', 'LOT', NewLotId)
								//Ensure the lot record is empty
								If LotRec<LOT_TYPE$> EQ '' AND LotRec<LOT_PROD_ID$> EQ '' AND LotRec<LOT_ORIG_WAFER_QTY$> EQ '' AND LotRec<LOT_WAFER_QTY$> EQ '' then
									LotRec<LOT_TYPE$>           = LotType
									LotRec<LOT_PROD_ID$>        = TWProdID
									LotRec<LOT_ORIG_WAFER_QTY$> = LotQty
									LotRec<LOT_WAFER_QTY$>      = LotQty
									LotRec<LOT_VENDOR_PART_NO$> = VendorPartNo
									LotRec<LOT_VENDOR_LOT_NO$>  = VendorLotNo
									LotRec<LOT_VENDOR_CODE$>    = VendorCode
									Database_Services('WriteDataRow', 'LOT', NewLotId, LotRec)
									//Now Ensure that the written lot matches what was just written
									LotRecCheck                 = Database_Services('ReadDataRow', 'LOT', NewLotId)
									If LotRecCheck EQ LotRec then
										//Lot Created successfully
										CreatedLotNumber = NewLotId
										If RowExists('LOT', CreatedLotNumber) then
											Lot_Services('CreateInitialLotOperationRecords', CreatedLotNumber)
											If Error_Services('NoError') then
												//Check in at first operation
												//Get Curr Operation(Should be first one in sequence)
												ThisLotCurrOpId = Lot_Services('GetLotCurrOperationId', CreatedLotNumber)
												If ThisLotCurrOpId NE ''  then
												    Lot_Services('CreateLotEvent', CreatedLotNumber, 'TW', Datetime(), 'MOVE_IN', 'Move Lot in.', '', 0, 0, ThisLotCurrOpId, Username)
													if Error_Services('NoError') then
														//Set lot to open
														Lot_Services('CreateLotEvent', CreatedLotNumber, 'TW', Datetime(), 'OPEN', 'Setting lot to open.', '', 0, 0, '', Username)
														if Error_Services('NoError') then
															If PrinterID NE 'WEB' then
																//If PrinterID is set to WEB this means the request comes from OI_Wizard and the client is going to handle printing.
																Labeling_Services('PrintTestWaferLotLabel', CreatedLotNumber, Username, PrinterID)
																If Error_Services('HasError') then
																	ErrorMessage = 'Error in Create New Test Wafer Lot Process, lot id: ' : CreatedLotNumber : ' , ' : Error_Services('GetMessage')
																end
															end
															Lot_Services('CreateLotEvent', CreatedLotNumber, 'TW', Datetime(), 'MOVE_OUT', 'Move Lot out.', '', 0, 0, '', Username)
															//Lot_Services('MoveOutLot', NewLotId, Username)
															If Error_Services('NoError') then
																//Lot_Services('MoveInLot', NewLotId, Username)
																Lot_Services('CreateLotEvent', CreatedLotNumber, 'TW', Datetime(), 'MOVE_IN', 'Move in out.', '', 0, 0, '', Username)
																If Error_Services('HasError') then
																	ErrorMessage = 'Error in Create New Test Wafer Lot Process, lot id: ' : NewLotId : ' , ' : Error_Services('GetMessage')
																end
															end else
																ErrorMessage = 'Error in Create New Test Wafer Lot Process, lot id: ' : NewLotId : ' , ' : Error_Services('GetMessage')
															end
														end else
															ErrorMessage = 'Error in Create New Test Wafer Lot Process, lot id: ' : NewLotId : ' , ' : Error_Services('GetMessage')
														end
													end else
													    //Close LOT record as there was an error
													    Lot_Services('CreateLotEvent', NewLotId, 'TW', Datetime(), 'CLOSE', 'Error occured while created lot. Automatically setting to close', '', 0, 0, '', 'SYSTEM')
														ErrorMessage = 'Error in Create New Test Wafer Lot Process, lot id: ' : NewLotId : ' , ' : Error_Services('GetMessage')
													end
												end else
												    //Close LOT record as there was an error
											        Lot_Services('CreateLotEvent', NewLotId, 'TW', Datetime(), 'CLOSE', 'Error occured while created lot. Automatically setting to close', '', 0, 0, '', 'SYSTEM')
													ErrorMessage = 'Error in Create New Test Wafer Lot Process, error getting current operation for lot: ' : NewLotId
												end
											end else
											    //Close LOT record as there was an error
											    //Database_Services('DeleteDataRow', 'LOT', NewLotId, True$, False$)
											    Lot_Services('CreateLotEvent', NewLotId, 'TW', Datetime(), 'CLOSE', 'Error occured while created lot. Automatically setting to close', '', 0, 0, '', 'SYSTEM')
												ErrorMessage = 'Error in Create New Test Wafer Lot Process, lot id: ' : NewLotId : ' , ' : Error_Services('GetMessage')
											end
										end
									end else
										ErrorMessage = 'Error in Create New Test Wafer Lot Process, Lot attributes did not write correctly for lot: ' : NewLotId
									end
								end else
									ErrorMessage = 'Error in Create New Test Wafer Lot Process, Lot already had data, lot: ' : NewLotId
								end
							end else
								ErrorMessage = 'Error in Create New Test Wafer Lot Process, Created lot: ' : NewLotId : ' not found in LOT table.'
							end
						end else
							ErrorMessage = 'Error in Create New Test Wafer Lot Process, no lot id returned.'
						end
					end else
						ErrorMessage = 'Error in Create New Test Wafer Lot Process, ambiguous product passed to routine OR no matching products found.'
					end
				end else
					ErrorMessage = 'Error in Create New Test Wafer Lot Process, product(':ProdName:') passed to routine not found.'
				end
			end else
				ErrorMessage = 'Null value passed in for ProdID'
			end    		
    	Case Otherwise$
    		ErrorMessage = 'Error in ':Service:' service. Lot Type "':LotType:'" is not currently supported.'
    End Case
    
    If ErrorMessage EQ '' then
        LogData    = ''
        LogData<1> = LoggingDTM
        LogData<2> = ProdName
        LogData<3> = Username
        LogData<4> = 'Successfully created lot id ' : CreatedLotNumber : ' of product type ' : ProdName '.'
        Logging_Services('AppendLog', objTWCreationLog, LogData, @RM, @FM, False$)
    end else
        LogData    = ''
        LogData<1> = LoggingDTM
        LogData<2> = ProdName
        LogData<3> = Username
        LogData<4> = ErrorMessage
        Logging_Services('AppendLog', objTWCreationLog, LogData, @RM, @FM, False$)
        Error_Services('Add', ErrorMessage)
    end
    Response = CreatedLotNumber
    
End Service


Service CreateNewTestWaferLot(LotType, ProdName, LotQty, VendorPartNo, VendorLotNo, VendorCode, Username, PrinterID)
    CreatedLotNumber = ''
    ErrorMessage     = ''
    If LotType EQ 'TW' then
        If ProdName NE '' then
            TWProdID = Test_Wafer_Prod_Services('GetTestWaferProdIDsByPartName', ProdName)
            If TWProdID NE '' then
                If DCount(TWProdID, @VM) EQ 1 then
                    NewLotId = Lot_Services('GenerateNewLotId', 'TW')
                    If NewLotId NE '' then
                        If RowExists('LOT', NewLotId) then
                            LotRec = Database_Services('ReadDataRow', 'LOT', NewLotId)
                            //Ensure the lot record is empty
                            If LotRec<LOT_TYPE$> EQ '' AND LotRec<LOT_PROD_ID$> EQ '' AND LotRec<LOT_ORIG_WAFER_QTY$> EQ '' AND LotRec<LOT_WAFER_QTY$> EQ '' then
                                LotRec<LOT_TYPE$>           = LotType
                                LotRec<LOT_PROD_ID$>        = TWProdID
                                LotRec<LOT_ORIG_WAFER_QTY$> = LotQty
                                LotRec<LOT_WAFER_QTY$>      = LotQty
                                LotRec<LOT_VENDOR_PART_NO$> = VendorPartNo
                                LotRec<LOT_VENDOR_LOT_NO$>  = VendorLotNo
                                LotRec<LOT_VENDOR_CODE$>    = VendorCode
                                Database_Services('WriteDataRow', 'LOT', NewLotId, LotRec)
                                //Now Ensure that the written lot matches what was just written
                                LotRecCheck                 = Database_Services('ReadDataRow', 'LOT', NewLotId)
                                If LotRecCheck EQ LotRec then
                                    //Lot Created successfully
                                    CreatedLotNumber = NewLotId
                                    If RowExists('LOT', CreatedLotNumber) then
                                        Lot_Services('CreateInitialLotOperationRecords', CreatedLotNumber)
                                        If Error_Services('NoError') then
                                            //Check in at first operation
                                            //Get Curr Operation(Should be first one in sequence)
                                            ThisLotCurrOpId = Lot_Services('GetLotCurrOperationId', CreatedLotNumber)
                                            If ThisLotCurrOpId NE ''  then
                                                Lot_Services('MoveInLot', NewLotId, Username)
                                                if Error_Services('NoError') then
                                                    //Set lot to open
                                                    Lot_Services('OpenLot', CreatedLotNumber)
                                                    if Error_Services('NoError') then
                                                        If PrinterID NE 'WEB' then
                                                            //If PrinterID is set to WEB this means the request comes from OI_Wizard and the client is going to handle printing.
                                                            Labeling_Services('PrintTestWaferLotLabel', CreatedLotNumber, Username, PrinterID)
                                                            If Error_Services('HasError') then
                                                                ErrorMessage = 'Error in Create New Test Wafer Lot Process, lot id: ' : CreatedLotNumber : ' , ' : Error_Services('GetMessage')
                                                            end
                                                        end
                                                        Lot_Services('MoveOutLot', NewLotId, Username)
                                                        If Error_Services('NoError') then
                                                            Lot_Services('MoveInLot', NewLotId, Username)
                                                            If Error_Services('HasError') then
                                                                ErrorMessage = 'Error in Create New Test Wafer Lot Process, lot id: ' : NewLotId : ' , ' : Error_Services('GetMessage')
                                                            end
                                                        end else
                                                            ErrorMessage = 'Error in Create New Test Wafer Lot Process, lot id: ' : NewLotId : ' , ' : Error_Services('GetMessage')
                                                        end
                                                    end else
                                                        ErrorMessage = 'Error in Create New Test Wafer Lot Process, lot id: ' : NewLotId : ' , ' : Error_Services('GetMessage')
                                                    end
                                                end else
                                                    ErrorMessage = 'Error in Create New Test Wafer Lot Process, lot id: ' : NewLotId : ' , ' : Error_Services('GetMessage')
                                                end
                                            end else
                                                ErrorMessage = 'Error in Create New Test Wafer Lot Process, error getting current operation for lot: ' : NewLotId
                                            end
                                        end else
                                            ErrorMessage = 'Error in Create New Test Wafer Lot Process, lot id: ' : NewLotId : ' , ' : Error_Services('GetMessage')
                                        end
                                    end
                                end else
                                    ErrorMessage = 'Error in Create New Test Wafer Lot Process, Lot attributes did not write correctly for lot: ' : NewLotId
                                end
                            end else
                                ErrorMessage = 'Error in Create New Test Wafer Lot Process, Lot already had data, lot: ' : NewLotId
                            end
                        end else
                            ErrorMessage = 'Error in Create New Test Wafer Lot Process, Created lot: ' : NewLotId : ' not found in LOT table.'
                        end
                    end else
                        ErrorMessage = 'Error in Create New Test Wafer Lot Process, no lot id returned.'
                    end
                end else
                    ErrorMessage = 'Error in Create New Test Wafer Lot Process, ambiguous product passed to routine OR no matching products found.'
                end
            end else
                ErrorMessage = 'Error in Create New Test Wafer Lot Process, product(':ProdName:') passed to routine not found.'
            end
        end else
            ErrorMessage = 'Null value passed in for ProdID'
        end
    end else
        ErrorMessage = 'Lot type was not test wafer'
    end
    If ErrorMessage EQ '' then
        LogData    = ''
        LogData<1> = LoggingDTM
        LogData<2> = ProdName
        LogData<3> = Username
        LogData<4> = 'Successfully created lot id ' : CreatedLotNumber : ' of product type ' : ProdName '.'
        Logging_Services('AppendLog', objTWCreationLog, LogData, @RM, @FM, False$)
    end else
        Error_Services('Add', ErrorMessage)
        LogData    = ''
        LogData<1> = LoggingDTM
        LogData<2> = ProdName
        LogData<3> = Username
        LogData<4> = ErrorMessage
        Logging_Services('AppendLog', objTWCreationLog, LogData, @RM, @FM, False$)
    end
    Response = CreatedLotNumber
End Service

Service GenerateInitialLotOperationRecords(LotId)
    ErrorMessage = ''
    If LotID NE '' then
        if RowExists('LOT', LotId) then
            LotRec            = Database_Services('ReadDataRow', 'LOT', LotId)
            ProdID            = LotRec<LOT_PROD_ID$>
            If ProdID NE '' then
                //Get product operations
                ThisLotOperations = Lot_Services('GetPrescribedOperationsByProdId', ProdId)
                If ThisLotOperations NE '' then
                    for each ProdOperationKey in ThisLotOperations using @FM
                        OperationRec      = Database_Services('ReadDataRow', 'PRODUCT_OPERATION', ProdOperationKey)
                        
                        //NewOperationRecID = 
                    Next operation
                end else
                    ErrorMessage = 'No Operations found for ' : ProdId 
                end
            end else
                ErrorMessage = 'Prod ID not specified'
            end
            //ID will be LotNum + OperationID
            //Get product operations
            
        end else
            ErrorMessage = 'Lot ID does not exist.'
        end
    end else
        ErrorMessage = 'Lot ID was null'
    end
    If ErrorMessage NE '' then
        Error_Services('Add', ErrorMessage)
    end
end service

Service GetPrescribedOperationsByProdId(ProdId, ProdType)
    ProdOperationKeys = ''
        If ProdId NE '' then
            Begin Case
                Case ProdType = 'TW'
                    ProdRec           = Database_Services('ReadDataRow', 'TEST_WAFER_PROD', ProdId)
                    ProdOperationKeys = ProdRec<TEST_WAFER_PROD_PRODUCT_OPERATIONS$>
                Case Otherwise$
                    //error, no matching prod type.
            End Case
        end else
            //Error: ProdID was null
        end
    Response = ProdOperationKeys
end service

Service CreateInitialLotOperationRecords(LotId)
    ErrorMessage = ''
    If LotId NE '' then
        LotRec                    = Database_Services('ReadDataRow', 'LOT', LotId)
        LotType                   = LotRec<LOT_TYPE$>
        ProdId                    = LotRec<LOT_PROD_ID$>
        ThisInitialProdOperations = Lot_Services('GetPrescribedOperationsByProdId', ProdId, LotType)
        If Error_Services('NoError') AND ThisInitialProdOperations NE '' then
            For each ProdOperation in ThisInitialProdOperations using @VM
            
                ProdOperationRec  = Database_Services('ReadDataRow', 'PRODUCT_OPERATION', ProdOperation)
                OperationID       = ProdOperationRec<PRODUCT_OPERATION_OPERATION_ID$>
                OperationSequence = ProdOperationRec<PRODUCT_OPERATION_OPERATION_SEQUENCE$>
                
                LotOperationRecID                                  = LotId : '*' : OperationID
                If Not(RowExists('LOT_OPERATION', LotOperationRecID)) then
                    LotOperationRec                                    = ''
                    LotOperationRec<LOT_OPERATION_LOT_ID$>             = LotId
                    LotOperationRec<LOT_OPERATION_OPERATION_ID$>       = OperationID
                    LotOperationRec<LOT_OPERATION_OPERATION_SEQUENCE$> = OperationSequence
                    LotOperationRec<LOT_OPERATION_REWORK$>             = False$
                    Database_Services('WriteDataRow', 'LOT_OPERATION', LotOperationRecId, LotOperationRec)
                    TestRec                                            = Database_Services('ReadDataRow', 'LOT', LotId)
                end else
                    ErrorMessage = 'Lot Operation already existed, cannot overwrite'
                end
                
            Next Operation
        end else
            ErrorMessage = 'Error getting prescribed operations for lot# ' : LotId
        end

    end else
        ErrorMessage = 'Lot ID was null'
    end
    If ErrorMessage NE '' then
        Error_Services('Add', ErrorMessage)
    end
end service

//Returns a @FM delimited list of operations in sequence
Service GetLotOperationSequence(LotId)
    LotOperationsInSequence = ''
    If LotID NE '' then
        //Get Operations
        LotOperations           = Xlate('LOT', LotId, LOT_LOT_OPERATIONS$, 'X')
        for each LotOperation in LotOperations using @VM
            ThisLotOperationSequence                          = Xlate('LOT_OPERATION', LotOperation, LOT_OPERATION_OPERATION_SEQUENCE$, 'X')
            LotOperationsInSequence<ThisLotOperationSequence> = LotOperation
        Next LotOperation
    end else
        //error: lot id was null
    end
    Response = LotOperationsInSequence
end service

//Returns a @FM delimited list of events in sequence
Service GetLotEventsInSequence(LotId)

    LotEventsUnsorted = ''
    LotEventsSorted   = ''
    LotEventsToReturn = ''
    If LotID NE '' then
        //Get Operations
        LotEvents = Xlate('LOT', LotId, LOT_LOT_EVENTS$, 'X')
        for each LotEvent in LotEvents using @VM
            ThisEventSequence                    = XLATE('LOT_EVENT', LotEvent, LOT_EVENT_SEQUENCE$, 'X')
            LotEventsToReturn<ThisEventSequence> = LotEvent
        Next LotOperation 
    end else
        //error: lot id was null
    end
    Response = LotEventsToReturn 
end service

Service GetLotCurrOperationId(LotId)
    CurrOperation = ''
    If LotID NE '' then
        //Get them in sequence first
        LotOperationsInSequence = Lot_Services('GetLotOperationSequence', LotId)
        for each LotOperation in LotOperationsInSequence using @FM 
            ThisLotOperationStartDTM = Xlate('LOT_OPERATION', LotOperation, LOT_OPERATION_DATETIME_IN$, 'X')
            ThisLotOperationEndDTM   = Xlate('LOT_OPERATION', LotOperation, LOT_OPERATION_DATETIME_OUT$, 'X')
            If ThisLotOperationEndDTM Eq '' then
                CurrOperation = LotOperation
            end
        until CurrOperation
        Next LotOperation
    end else
        //error: lot id was null
    end
    Response = CurrOperation
end service

Service GetLotCurrOperationName(LotId)
    CurrOperationId   = ''
    CurrOperationName = ''
    If LotID NE '' then
        //Get them in sequence first
        LotOperationsInSequence = Lot_Services('GetLotOperationSequence', LotId)
        for each LotOperation in LotOperationsInSequence using @FM 
            ThisLotOperationStartDTM = Xlate('LOT_OPERATION', LotOperation, LOT_OPERATION_DATETIME_IN$, 'X')
            ThisLotOperationEndDTM   = Xlate('LOT_OPERATION', LotOperation, LOT_OPERATION_DATETIME_OUT$, 'X')
            If ThisLotOperationEndDTM Eq '' then
                CurrOperationId   = LotOperation
                CurrOperationName = Database_Services('ReadDataColumn', 'LOT_OPERATION', CurrOperationId, LOT_OPERATION_OPERATION_ID$, True$, 0, False$)
            end
        until CurrOperationName
        Next LotOperation
    end else
        //error: lot id was null
    end
    Response = CurrOperationName
end service

Service AddLotOperationIntoSequence(LotId, NewOperationId, NewSequence, Rework)
    ErrorMessage = ''
    If LotId NE '' then
        If NewSequence NE '' AND Num(NewSequence) then
            //Get Current Operations in sequence
            //CurrSequence = Lot_Services('GetLotOperationSequence', LotId)
            LotCurrOperation      = Lot_Services('GetLotCurrOperationId', LotId)
            CurrOperationSequence = Xlate('LOT_OPERATION', LotCurrOperation, LOT_OPERATION_OPERATION_SEQUENCE$, 'X')
            If CurrOperationSequence LE NewSequence then
                //Get Curr Operation Sequence
                Done                     = False$
                LotCurrOperationSequence = Lot_Services('GetLotOperationSequence', LotId)
                for each Operation in LotCurrOperationSequence using @Fm setting OpPos
                    ThisOperationRec      = Database_Services('ReadDataRow', 'LOT_OPERATION', Operation)
                    ThisOperationSequence = ThisOperationRec<LOT_OPERATION_OPERATION_SEQUENCE$>
                    If ThisOperationSequence GE NewSequence then
                        NewOperationSequence                                = ThisOperationSequence + 1
                        ThisOperationRec<LOT_OPERATION_OPERATION_SEQUENCE$> = NewOperationSequence
                        Database_Services('WriteDataRow', 'LOT_OPERATION', Operation, ThisOperationRec)
                        If Error_Services('HasError') then
                            Done         = True$
                            ErrorMessage = Error_Services('GetMessage')
                        end
                    end
                Until Done
                Next Operation
                If ErrorMessage EQ '' then
                    LotOperationRecID                                  = LotId : '*' : NewOperationId
                    If Not(RowExists('LOT_OPERATION', LotOperationRecID)) then
                        LotOperationRec                                    = ''
                        LotOperationRec<LOT_OPERATION_LOT_ID$>             = LotId
                        LotOperationRec<LOT_OPERATION_OPERATION_ID$>       = NewOperationId
                        LotOperationRec<LOT_OPERATION_OPERATION_SEQUENCE$> = NewSequence
                        LotOperationRec<LOT_OPERATION_REWORK$>             = Rework
                        Database_Services('WriteDataRow', 'LOT_OPERATION', LotOperationRecId, LotOperationRec)
                    end else
                        //Error: Lot Operation already existed, cannot overwrite
                    end
                end
            end else
                //Error: Not allowed to add new operations prior to current operation
            end
        end else
            //Error: null or invalid sequence passed to routine
        end
    end else
        //Error: Lot id was null
    end
    If ErrorMessage NE '' then
        Error_Services('Add', ErrorMessage)
    end
end service

Service IsLotMovedIn(LotId)
    Response = ''
    If RowExists('LOT', LotId) then
        CurrOperId    = Lot_Services('GetLotCurrOperationId', LotId)
        CurrOperDtmIn = Database_Services('ReadDataColumn', 'LOT_OPERATION', CurrOperId, LOT_OPERATION_DATETIME_IN$, True$, 0, False$)
        If CurrOperDtmIn LE Datetime() AND CurrOperDtmIn NE '' then
            Response = True$
        end else
            Response = False$
        end
    end
end service

Service MoveInLot(LotID, Operator)
    ErrorMessage           = ''
    ThisLotCurrOperationID = ''
    If LotId NE '' then
            If RowExists('LOT', LotId) then
                ThisLotRec = Database_Services('ReadDataRow', 'LOT', LotId)
                WaferQty   = ThisLotRec<LOT_WAFER_QTY$>
                //Possibly Add locking here
                If Error_Services('NoError') then
                    ThisLotCurrOperationID                                 = Lot_Services('GetLotCurrOperationId', LotId)
                    If ThisLotCurrOperationID NE '' then
                        ThisLotCurrOperationRec                                = Database_Services('ReadDataRow', 'LOT_OPERATION', ThisLotCurrOperationID)
                        ThisLotCurrOperationRec<LOT_OPERATION_DATETIME_IN$>    = Datetime()
                        ThisLotCurrOperationRec<LOT_OPERATION_WAFER_IN_QTY$>   = WaferQty
                        ThisLotCurrOperationRec<LOT_OPERATION_OPERATOR_IN_ID$> = Operator
                        Database_Services('WriteDataRow', 'LOT_OPERATION', ThisLotCurrOperationID, ThisLotCurrOperationRec)
                        If Error_Services('NoError') then
                            LotType       = XLATE('LOT', LotId, LOT_TYPE$, 'X')
                            CurrOperation = XLATE('LOT_OPERATION', ThisLotCurrOperationID, LOT_OPERATION_OPERATION_ID$, 'X')
                            If Error_Services('HasError') then
                                ErrorMessage = 'Error in Move In process for Lot id ' : LotId : '. ' : Error_Services('GetMessage') 
                            end
                        end else
                            ErrorMessage = 'Error in Move In process for Lot id ' : LotId : '. Error writing to lot operation record. ' : Error_Services('GetMessage')    
                        end
                    end else
                        ErrorMessage = 'Error in Move In process for Lot id ' : LotId : '. Error getting lots current operation.'
                    end
                end else
                    ErrorMessage = 'Error in Move In process for Lot id ' : LotId : '. ' : Error_Services('GetMessage')
                end
            end else
                ErrorMessage = 'Error in Move In process for Lot id ' : LotId : '. Lot ID not found in LOT table.'
            end
     end else
        ErrorMessage = 'Error in Move In process. Lot id was not passed to routine.'
     end
     If ErrorMessage NE '' then
         LogData    = ''
         LogData<1> = LoggingDTM
         LogData<2> = LotID
         LogData<3> = Operator
         LogData<4> = 'Successfully Moved Lot into operation ' : ThisLotCurrOperationID : '.'
         Logging_Services('AppendLog', objLotMoveLog, LogData, @RM, @FM, False$)
         Error_Services('Add', ErrorMessage)
     end
end service

Service MoveOutLot(LotID, Operator)
    ErrorMessage           = ''
    ThisLotCurrOperationID = ''
    If LotId NE '' then
            If RowExists('LOT', LotId) then
                ThisLotRec = Database_Services('ReadDataRow', 'LOT', LotId)
                WaferQty   = ThisLotRec<LOT_WAFER_QTY$>
                If Error_Services('NoError') then
                    ThisLotCurrOperationID                                  = Lot_Services('GetLotCurrOperationId', LotId)
                    If ThisLotCurrOperationID NE '' then
                        ThisLotCurrOperationRec                                 = Database_Services('ReadDataRow', 'LOT_OPERATION', ThisLotCurrOperationID)
                        ThisLotCurrOperationRec<LOT_OPERATION_DATETIME_OUT$>    = Datetime()
                        ThisLotCurrOperationRec<LOT_OPERATION_WAFER_OUT_QTY$>   = WaferQty
                        ThisLotCurrOperationRec<LOT_OPERATION_OPERATOR_OUT_ID$> = Operator
                        Database_Services('WriteDataRow', 'LOT_OPERATION', ThisLotCurrOperationID, ThisLotCurrOperationRec)
                        If Error_Services('NoError') then
                            LotType       = XLATE('LOT', LotId, LOT_TYPE$, 'X')
                            CurrOperation = XLATE('LOT_OPERATION', ThisLotCurrOperationID, LOT_OPERATION_OPERATION_ID$, 'X')
                            If Error_Services('HasError') then
                                ErrorMessage = 'Error in Move In process for Lot id ' : LotId : '. ' : Error_Services('GetMessage') 
                            end
                        end else
                            ErrorMessage = 'Error in Move Out process for Lot id ' : LotId : '. Error writing to lot operation record. ' : Error_Services('GetMessage')
                        end
                    end else
                        ErrorMessage = 'Error in Move Out process for Lot id ' : LotId : '. Error getting lots current operation.'
                    end
                end else
                    ErrorMessage = 'Error in Move Out process for Lot id ' : LotId : '. ' : Error_Services('GetMessage')
                end
            end else
                ErrorMessage = 'Error in Move Out process for Lot id ' : LotId : '. Lot ID not found in LOT table.'
            end
     end else
        ErrorMessage = 'Error in Move Out process. Lot id was not passed to routine.'
     end
     If ErrorMessage NE '' then
         LogData    = ''
         LogData<1> = LoggingDTM
         LogData<2> = LotID
         LogData<3> = Operator
         LogData<4> = 'Successfully Moved Lot out of operation ' : ThisLotCurrOperationID : '.'
         Logging_Services('AppendLog', objLotMoveLog, LogData, @RM, @FM, False$)
         Error_Services('Add', ErrorMessage)
     end else
         LogData    = ''
         LogData<1> = LoggingDTM
         LogData<2> = LotID
         LogData<3> = Operator
         LogData<4> = 'Error in Move Out process for Lot id ' : LotId : '. ' : ErrorMessage
         Logging_Services('AppendLog', objLotMoveLog, LogData, @RM, @FM, False$)
         Error_Services('Add', ErrorMessage)
     end
end service

Service CreateLotEvent(LotId, LotType=LOT_TYPES, EventDatetime, EventType=EVENT_TYPES, EventNote, EventEquipmentId, ReduceWaferQty, BonusWaferQty, OperationId, OperatorId)
    ErrorMessage   = ''
    BeginWaferQty  = 0
    EndWaferQty    = 0
    WaferQtyChange = 0
    If LotId NE '' then
        Begin Case
            Case LotType EQ 'TW'
                If OperatorId NE '' then
                    If RowExists('LOT', LotId) then
                        ValidId    = False$
                        NewEventId = ''
                        Loop
                            NewEventId = RTI_CreateGUID()
                            If Not(RowExists('LOT_EVENT', NewEventId)) then
                                ValidId = True$
                            end
                        Until ValidId EQ True$
                        Repeat
                        BeginWaferQty                                  = Xlate('LOT', LotId, LOT_WAFER_QTY$, 'X')
                        If OperationID EQ '' then
                            OperationID       = Lot_Services('GetLotCurrOperationId', LotId)
                            //CurrOperationName = XLATE('LOT_OPERATION', OperationID, LOT_OPERATION_OPERATION_ID$, 'X')
                        end
                        If OperationID NE '' then
*                               

                                Begin Case
                                    Case EventType EQ 'MOVE_IN'
                                        Lot_Services('MoveInLot', LotId, OperatorId)
                                        If Error_Services('NoError') then

                                        end else
                                            ErrorMessage = Error_Services('GetMessage')
                                        end
                                    Case EventType EQ 'MOVE_OUT'
                                        Lot_Services('MoveOutLot', LotId, OperatorId)
                                        If Error_Services('NoError') then
                                            
                                        end else
                                            ErrorMessage = Error_Services('GetMessage')
                                        end
                                    Case EventType EQ 'HOLD_ON'
                                        Lot_Services('HoldLot', LotId, OperatorId)
                                        If Error_Services('NoError') then
                                            
                                        end else
                                            ErrorMessage = Error_Services('GetMessage')
                                        end
                                    Case EventType EQ 'HOLD_OFF'
                                        Lot_Services('UnholdLot', LotId, OperatorId)
                                        If Error_Services('NoError') then
                                            
                                        end else
                                            ErrorMessage = Error_Services('GetMessage')
                                        end
                                    Case EventType EQ 'REDUCE_WAFER_QTY'
                                        Lot_Services('ReduceLotWaferCount', LotId, ReduceWaferQty)
                                        If Error_Services('NoError') then
                                            
                                        end else
                                            ErrorMessage = Error_Services('GetMessage')
                                        end
                                    Case EventType EQ 'BONUS_WAFER_QTY'
                                        Lot_Services('IncreaseLotWaferCount', LotId, BonusWaferQty)
                                        If Error_Services('NoError') then
                                            
                                        end else
                                            ErrorMessage = Error_Services('GetMessage')
                                        end
                                    Case EventType EQ 'COMMENT'
                                        //Do Nothing Extra
                                    Case EventType EQ 'LOCATION'
                                        //Do nothing for now.
                                    Case EventType EQ 'CLOSE'
                                        Lot_Services('CloseLot', LotId)
                                        If Error_Services('HasError') then
                                            ErrorMessage = 'Error in Create Lot Event routine, ' : Error_Services('GetMessage')
                                        end
                                    Case EventType EQ 'OPEN'
                                        Lot_Services('OpenLot', LotId)
                                        If Error_Services('HasError') then
                                            ErrorMessage = 'Error in Create Lot Event routine, ' : Error_Services('GetMessage')
                                        end
                                    Case Otherwise$
                                        ErrorMessage = 'Error in Create Lot Event routine, event type of ' : EventType : ' passed to routine is not valid for a lot of type TW.'
                                End Case
*                                If Error_Services('HasError') then
*                                    ErrorMessage = Error_Services('GetMessage')
*                                end
                                If ErrorMessage EQ '' then
                                    EndWaferQty = (BeginWaferQty + BonusWaferQty) - ReduceWaferQty
                                    
                                    NewEventRec                                    = ''
                                    NewEventRec<LOT_EVENT_LOT_ID$>                 = LotId
                                    NewEventRec<LOT_EVENT_LOT_EVENT_TYPE$>         = EventType
                                    NewEventRec<LOT_EVENT_EVENT_DATETIME$>         = EventDatetime
                                    NewEventRec<LOT_EVENT_EVENT_NOTE$>             = EventNote
                                    NewEventRec<LOT_EVENT_EQUIPMENT_ID$>           = EventEquipmentId
                                    NewEventRec<LOT_EVENT_EVENT_REDUCE_WAFER_QTY$> = ReduceWaferQty
                                    NewEventRec<LOT_EVENT_EVENT_BONUS_WAFER_QTY$>  = BonusWaferQty
                                    NewEventRec<LOT_EVENT_EVENT_BEGIN_WAFER_QTY$>  = BeginWaferQty
                                    NewEventRec<LOT_EVENT_EVENT_END_WAFER_QTY$>    = EndWaferQty
                                    NewEventRec<LOT_EVENT_EVENT_OPERATION_ID$>     = OperationId
                                    NewEventRec<LOT_EVENT_EVENT_OPERATOR_ID$>      = OperatorId
                                    NewEventSequence                               = Lot_Services('GetLotEventNextSequence', LotId)
                                    NewEventRec<LOT_EVENT_SEQUENCE$>               = NewEventSequence
                                    Database_Services('WriteDataRow', 'LOT_EVENT', NewEventId, NewEventRec)
                                    if Error_Services('NoError') then
                                        If BeginWaferQty NE EndWaferQty then
                                            //Adjust LOT wafer qty
                                            LotRecord = Database_Services('ReadDataRow', 'LOT', LotId, True$, 0, False$)
                                            If LotRecord NE '' then
                                                LotRecord<LOT_WAFER_QTY$> = EndWaferQty
                                                Database_Services('WriteDataRow', 'LOT', LotId, LotRecord, True$, False$, False$)
                                                If Error_Services('HasError') then
                                                    ErrorMessage = 'Error in CreateLotEvent routine, failed attempt to close lot ':LotId:'. Failed to write to LOT record.'
                                                end
                                            end
                                        end
                                    end else
                                        ErrorMessage = 'Error in Create Lot Event routine, Error writing Lot Event record, ' : Error_Services('GetMessage')
                                    end    
                                end
                        end else
                            ErrorMessage = 'Error in Create Lot Event routine, Current Operation for lot id ' : LotId : ' could not be determined.'
                        end
                    end else
                        ErrorMessage = 'Error in Create Lot Event routine, Lot Id passed to routine was not found in LOT table.'
                    end
                end else
                    ErrorMessage = 'Error in Create Lot Event routine, Operator ID was null.'
                end
            Case LotType EQ 'RDS'
                If EventType NE '' AND OperatorId NE '' then
                	If RowExists('LOT', LotId) EQ False$ then Lot_Services('CreateNewLot', 'RDS', '', '', '', '', '', OperatorId, '', LotId)
                    If RowExists('LOT', LotId) then
                        ValidId    = False$
                        NewEventId = ''
                        Loop
                            NewEventId = RTI_CreateGUID()
                            If Not(RowExists('LOT_EVENT', NewEventId)) then
                                ValidId = True$
                            end
                        Until ValidId EQ True$
                        Repeat
                        BeginWaferQty = Xlate('LOT', LotId, LOT_WAFER_QTY$, 'X')
						If ReduceWaferQty NE '' then
							If Num(ReduceWaferQty) then
								EndWaferQty = BeginWaferQty - ReduceWaferQty
							end
						end
						If BonusWaferQty NE '' then
							If Num(BonusWaferQty) then
								EndWaferQty = BeginWaferQty + BonusWaferQty
							end
						end
						If Not(Num(EventDatetime)) then EventDatetime = IConv(EventDatetime, 'DT')
						NewEventRec                                    = ''
						NewEventRec<LOT_EVENT_LOT_ID$>                 = LotId
						NewEventRec<LOT_EVENT_LOT_EVENT_TYPE$>         = EventType
						NewEventRec<LOT_EVENT_EVENT_DATETIME$>         = EventDatetime
						NewEventRec<LOT_EVENT_EVENT_NOTE$>             = EventNote
						NewEventRec<LOT_EVENT_EQUIPMENT_ID$>           = EventEquipmentId
						NewEventRec<LOT_EVENT_EVENT_REDUCE_WAFER_QTY$> = ReduceWaferQty
						NewEventRec<LOT_EVENT_EVENT_BONUS_WAFER_QTY$>  = BonusWaferQty
						NewEventRec<LOT_EVENT_EVENT_BEGIN_WAFER_QTY$>  = BeginWaferQty
						NewEventRec<LOT_EVENT_EVENT_END_WAFER_QTY$>    = EndWaferQty
						NewEventRec<LOT_EVENT_EVENT_OPERATION_ID$>     = OperationId
						NewEventRec<LOT_EVENT_EVENT_OPERATOR_ID$>      = OperatorId
						NewEventSequence                               = Lot_Services('GetLotEventNextSequence', LotId)
						NewEventRec<LOT_EVENT_SEQUENCE$>               = NewEventSequence						

						Database_Services('WriteDataRow', 'LOT_EVENT', NewEventId, NewEventRec)
						if Error_Services('HasError') then
							ErrorMessage = 'Error in Create Lot Event routine, Error writing Lot Event record, ' : Error_Services('GetMessage')
						end                            
                    end else
                        ErrorMessage = 'Error in Create Lot Event routine, Lot Id passed to routine was not found in LOT table.'
                    end
                end else
                    ErrorMessage = 'Error in Create Lot Event routine, Missing event type or Operator ID.'
                end

            Case LotType EQ 'WM_OUT'
                ErrorMessage = 'Error in Create Lot Event routine, Lot type WM_OUT was passed to routine and this is currently not supported.'
            Case LotType EQ 'WM_IN'
                ErrorMessage = 'Error in Create Lot Event routine, Lot type WM_IN was passed to routine and this is currently not supported.'
            Case Otherwise$
                ErrorMessage = 'Error in Create Lot Event routine, An invalid lot type was passed to routine.'
        End Case
    end else
        ErrorMessage = 'Error in Create Lot Event routine, A null value for Lot Id was passed to routine.'
    end
    If ErrorMessage EQ '' then
        LogData    = ''
        LogData<1> = LoggingDTM
        LogData<2> = LotId
        LogData<3> = EventType
        LogData<4> = OperatorId
        LogData<5> = BeginWaferQty
        LogData<6> = EndWaferQty
        LogData<7> = BonusWaferQty
        LogData<8> = ReduceWaferQty
        LogData<9> = 'Successfully logged event.'
        Logging_Services('AppendLog', objLotEventLog, LogData, @RM, @FM, False$)
    end else
        LogData    = ''
        LogData<1> = LoggingDTM
        LogData<2> = LotId
        LogData<3> = EventType
        LogData<4> = OperatorId
        LogData<5> = BeginWaferQty
        LogData<6> = EndWaferQty
        LogData<7> = BonusWaferQty
        LogData<8> = ReduceWaferQty
        LogData<9> = ErrorMessage
        Logging_Services('AppendLog', objLotEventLog, LogData, @RM, @FM, False$)
        Error_Services('Add', ErrorMessage)
    end
end service

Service GetLotEventNextSequence(LotId)
    ErrorMessage = ''
    NextSequence = 1
    If LotID NE '' then
        If RowExists('LOT', LotId) then
            LotEvents = XLATE('LOT', LotId, LOT_LOT_EVENTS$, 'X')
            for each LotEvent in LotEvents using @VM
                ThisEventSequence = XLATE('LOT_EVENT', LotEvent, LOT_EVENT_SEQUENCE$, 'X')
                If ThisEventSequence GE NextSequence then NextSequence = ThisEventSequence + 1
            Next LotEvent
        end else
            ErrorMessage = 'Unable to get lot event sequence: Lot ID not found.'
        end
    end else
        ErrorMessage = 'Unable to get lot event sequence: Lot ID was null.'
    end
    If ErrorMessage EQ '' then
        Response = NextSequence
    end else
        Error_Services('Add', ErrorMessage)
    end
end service

Service ConvertLotRecordToJson(LotId, ItemURL, CurrUser, FullObject=BOOLEAN)

    ErrorMessage = ''
    JsonString   = ''
    If FullObject EQ '' then
        FullObject = True$
    end
    If RowExists('LOT', LotId) then
        objJSON = ''
        If SRP_JSON(objJSON, 'New', 'Object') then
            LotRec = Database_Services('ReadDataRow', 'LOT', LotId)
            If Error_Services('NoError') then
                If SRP_JSON(objLot, 'New', 'Object') then
                
                    SRP_JSON(objLot, 'SetValue', 'LotId', LotId)
                    SRP_JSON(objLot, 'SetValue', 'Type', LotRec<LOT_TYPE$>)
                    SRP_JSON(objLot, 'SetValue', 'ProdId', LotRec<LOT_PROD_ID$>)
                    Begin Case
                        Case LotRec<LOT_TYPE$> = 'TW'
                            ProdName = XLATE('TEST_WAFER_PROD', LotRec<LOT_PROD_ID$>, TEST_WAFER_PROD_PART_NAME$, 'X')
                        Case Otherwise$
                            ProdName = ''
                    End Case
                    SRP_JSON(objLot, 'SetValue', 'ProdName', ProdName)
                    SRP_JSON(objLot, 'SetValue', 'OrigWaferQty', LotRec<LOT_ORIG_WAFER_QTY$>)
                    SRP_JSON(objLot, 'SetValue', 'WaferQty', LotRec<LOT_WAFER_QTY$>)
                    SRP_JSON(objLot, 'SetValue', 'VendorPartNo', LotRec<LOT_VENDOR_PART_NO$>)
                    SRP_JSON(objLot, 'SetValue', 'VendorLotNo', LotRec<LOT_VENDOR_LOT_NO$>)
                    SRP_JSON(objLot, 'SetValue', 'Vendor', LotRec<LOT_VENDOR_CODE$>)
                    CurrOperation = Lot_Services('GetLotCurrOperationId', LotId)
                    CurrOperation = Field(CurrOperation, '*', 2)
                    SRP_JSON(objLot, 'SetValue', 'CurrOperation', CurrOperation)
                    If FullObject then
                        //Events Array
                        EventsArrayJson     = ''
                        If SRP_Json(EventsArrayJson, 'New', 'Array') then
                            LotEventKeys = Lot_Services('GetLotEventsInSequence', LotId)
                            for each LotEventKey in LotEventKeys using @FM
                                objEvent = ''
                                EventRec = Database_Services('ReadDataRow', 'LOT_EVENT', LotEventKey)
                                If SRP_Json(objEvent, 'New', 'Object') then
                                    SRP_JSON(objEvent, 'SetValue', 'LotEventId', LotEventKey)
                                    SRP_JSON(objEvent, 'SetValue', 'LotId', EventRec<LOT_EVENT_LOT_ID$>)
                                    SRP_JSON(objEvent, 'SetValue', 'LotEventType', EventRec<LOT_EVENT_LOT_EVENT_TYPE$>)
                                    SRP_JSON(objEvent, 'SetValue', 'EventDatetime', OConv(EventRec<LOT_EVENT_EVENT_DATETIME$>, 'DT'))
                                    SRP_JSON(objEvent, 'SetValue', 'EventNote', EventRec<LOT_EVENT_EVENT_NOTE$>)
                                    SRP_JSON(objEvent, 'SetValue', 'EquipmentId', EventRec<LOT_EVENT_EQUIPMENT_ID$>)
                                    SRP_JSON(objEvent, 'SetValue', 'EventReduceWaferQty', EventRec<LOT_EVENT_EVENT_REDUCE_WAFER_QTY$>)
                                    SRP_JSON(objEvent, 'SetValue', 'EventBonusWaferQty', EventRec<LOT_EVENT_EVENT_BONUS_WAFER_QTY$>)
                                    SRP_JSON(objEvent, 'SetValue', 'EventBeginWaferQty', EventRec<LOT_EVENT_EVENT_BEGIN_WAFER_QTY$>)
                                    SRP_JSON(objEvent, 'SetValue', 'EventEndWaferQty', EventRec<LOT_EVENT_EVENT_END_WAFER_QTY$>)
                                    SRP_JSON(objEvent, 'SetValue', 'EventOperationId', EventRec<LOT_EVENT_EVENT_OPERATION_ID$>)
                                    SRP_JSON(objEvent, 'SetValue', 'EventOperatorId', EventRec<LOT_EVENT_EVENT_OPERATOR_ID$>)
                                    SRP_JSON(objEvent, 'SetValue', 'Sequence', EventRec<LOT_EVENT_SEQUENCE$>)
                                    SRP_JSON(EventsArrayJson, 'Add', objEvent)
                                    SRP_JSON(objEvent, 'Release')
                                end
                            Next LotEventKey
                            SRP_JSON(objLot, 'Set', 'LotEvents', EventsArrayJson)
                            SRP_JSON(EventsArrayJson, 'Release')
                        end else
                            ErrorMessage = 'Error Creating Events JSON Array'
                        end
                        //Operations Array
                        OperationsArrayJson = ''
                        If SRP_Json(OperationsArrayJson, 'New', 'Array') then
                            LotOperationKeys = Lot_Services('GetLotOperationSequence', LotId)
                            for each LotOperationKey in LotOperationKeys using @FM
                                objOperation = ''
                                OperationRec = Database_Services('ReadDataRow', 'LOT_OPERATION', LotOperationKey)
                                If SRP_Json(objOperation, 'New', 'Object') then
                                    SRP_JSON(objOperation, 'SetValue', 'LotOperationId', LotOperationKey)
                                    SRP_JSON(objOperation, 'SetValue', 'LotId', OperationRec<LOT_OPERATION_LOT_ID$>)
                                    SRP_JSON(objOperation, 'SetValue', 'OperationId', OperationRec<LOT_OPERATION_OPERATION_ID$>)
                                    SRP_JSON(objOperation, 'SetValue', 'DatetimeIn', OConv(OperationRec<LOT_OPERATION_DATETIME_IN$>, 'DT'))
                                    SRP_JSON(objOperation, 'SetValue', 'DatetimeOut', Oconv(OperationRec<LOT_OPERATION_DATETIME_OUT$>, 'DT'))
                                    SRP_JSON(objOperation, 'SetValue', 'EquipmentId', OperationRec<LOT_OPERATION_EQUIPMENT_ID$>)
                                    SRP_JSON(objOperation, 'SetValue', 'WaferInQty', OperationRec<LOT_OPERATION_WAFER_IN_QTY$>)
                                    SRP_JSON(objOperation, 'SetValue', 'WaferOutQty', OperationRec<LOT_OPERATION_WAFER_OUT_QTY$>)
                                    SRP_JSON(objOperation, 'SetValue', 'OperatorInId', OperationRec<LOT_OPERATION_OPERATOR_IN_ID$>)
                                    SRP_JSON(objOperation, 'SetValue', 'OperatorOutId', OperationRec<LOT_OPERATION_OPERATOR_OUT_ID$>)
                                    SRP_JSON(objOperation, 'SetValue', 'OperationSequence', OperationRec<LOT_OPERATION_OPERATION_SEQUENCE$>)
                                    SRP_JSON(objOperation, 'SetValue', 'Rework', OperationRec<LOT_OPERATION_REWORK$>)
                                    SRP_JSON(objOperation, 'SetValue', 'DatetimeStart', OConv(OperationRec<LOT_OPERATION_DATETIME_START$>, 'DT'))
                                    SRP_JSON(objOperation, 'SetValue', 'DatetimeStop', OConv(OperationRec<LOT_OPERATION_DATETIME_STOP$>, 'DT'))
                                    SRP_JSON(OperationsArrayJson, 'Add', objOperation)
                                    SRP_JSON(objOperation, 'Release')
                                end
                                
                            Next LotOperationKey
                            SRP_JSON(objLot, 'Set', 'LotOperations', OperationsArrayJson)
                            SRP_JSON(OperationsArrayJson, 'Release')
                        end else
                            ErrorMessage = 'Error Creating Operations JSON Array'
                        end
                    end
                    
                    SRP_JSON(objJSON, 'Set', 'Lot', objLot)
                    SRP_JSON(objLot, 'Release')
                end else
                    ErrorMessage = 'Error creating new Lot Json Object'
                end
            end else
                ErrorMessage = 'Error reading ':LotId:' from lot table.'
            end
            JsonString = SRP_JSON(objJSON, 'Stringify', 'Styled')
            SRP_JSON(objJSON, 'Release')
        end else
            ErrorMessage = 'Error creating new Json Object'
        end
    end else
        ErrorMessage = 'Invalid or null lot number passed to routine.'
    end
    If ErrorMessage NE '' then
        Error_Services('Add', ErrorMessage)
    end
    Response = JsonString
end service

Service OpenLot(LotId)
    ErrorMessage = ''
    If RowExists('LOT', LotId) then
        LotRec            = Database_Services('ReadDataRow', 'LOT', LotId, True$, 0, False$)
        LotRec<LOT_OPEN$> = True$
        Database_Services('WriteDataRow', 'LOT', LotId, LotRec, True$, False$, False$)
        If Error_Services('HasError') then
            ErrorMessage = 'Error setting lot ' : LotId : ' to open.' : Error_Services('GetMessage')
        end
    end else
        ErrorMessage = 'Unable to Open Lot ' : LotId : '. Lot ID was not found in LOT table.'
    end
    If ErrorMessage NE ''  then
        Error_Services('Add', ErrorMessage)
    end
end service

Service CloseLot(LotId)
    ErrorMessage = ''
    If RowExists('LOT', LotId) then
        LotRec            = Database_Services('ReadDataRow', 'LOT', LotId, True$, 0, False$)
        LotRec<LOT_OPEN$> = False$
        Database_Services('WriteDataRow', 'LOT', LotId, LotRec, True$, False$, False$)
        If Error_Services('HasError') then
            ErrorMessage = 'Error setting lot ' : LotId : ' to closed.' : Error_Services('GetMessage')
        end
    end else
        ErrorMessage = 'Unable to Close Lot ' : LotId : '. Lot ID was not found in LOT table.'
    end
    If ErrorMessage NE ''  then
        Error_Services('Add', ErrorMessage)
    end
end service

Service HoldLot(LotId, OperatorId)
    
end service

Service UnholdLot(LotId, OperatorId)
    
end service


Service ReduceLotWaferCount(LotId, ReductionQty)
    ErrorMessage = ''
    If RowExists('LOT', LotId) then
        LotRec        = Database_Services('ReadDataRow', 'LOT', LotId, True$, 0, False$)
        LotHold       = LotRec<LOT_HOLD$>
        LotOpen       = LotRec<LOT_OPEN$>
        LotCurrWfrQty = LotRec<LOT_WAFER_QTY$>
        LotNewWfrQty  = LotCurrWfrQty - ReductionQty
        If LotNewWfrQty LE 25 AND LotNewWfrQty GE 0 then
            LotRec<LOT_WAFER_QTY$> = LotNewWfrQty
            Database_Services('WriteDataRow', 'LOT', LotId, LotRec, True$, False$, False$)
            If Error_Services('HasError') then
                ErrorMessage = 'Error in Increase Lot Wafer Count service, Error writing Lot Id ' : LotId : ' with new quantity.'
            end
        end else
            Begin Case
                Case LotNewWfrQty GT 25
                    ErrorMessage = 'Error in Reduce Lot Wafer Count service, Lot Id ' : LotId : ' cannot have a quantity great than 25.'
                Case LotNewWfrQty LT 0
                    ErrorMessage = 'Error in Reduce Lot Wafer Count service, Lot Id ' : LotId : ' cannot have a quantity less than 0.'
            End Case
        end
    end else
       ErrorMessage = 'Error in Reduce Lot Wafer Count service, Lot Id ' : LotId : ' not found in lot table.' 
    end
    if ErrorMessage NE '' then
        Error_Services('Add', ErrorMessage)
    end
end service

Service IncreaseLotWaferCount(LotId, IncreaseQty)
    ErrorMessage = ''
    If RowExists('LOT', LotId) then
        LotRec        = Database_Services('ReadDataRow', 'LOT', LotId, True$, 0, False$)
        LotHold       = LotRec<LOT_HOLD$>
        LotOpen       = LotRec<LOT_OPEN$>
        if LotOpen then
            If Not(LotHold) then
                LotCurrWfrQty = LotRec<LOT_WAFER_QTY$>
                LotNewWfrQty  = LotCurrWfrQty + IncreaseQty
                
                If LotNewWfrQty LE 25 AND LotNewWfrQty GT 0 then
                    LotRec<LOT_WAFER_QTY$> = LotNewWfrQty
                    Database_Services('WriteDataRow', 'LOT', LotId, LotRec, True$, False$, False$)
                    If Error_Services('HasError') then
                        ErrorMessage = 'Error in Increase Lot Wafer Count service, Error writing Lot Id ' : LotId : ' with new quantity.'
                    end
                end else
                    Begin Case
                        Case LotNewWfrQty GT 25
                            ErrorMessage = 'Error in Increase Lot Wafer Count service, Lot Id ' : LotId : ' cannot have a quantity great than 25.'
                        Case LotNewWfrQty LT 0
                            ErrorMessage = 'Error in Increase Lot Wafer Count service, Lot Id ' : LotId : ' cannot have a quantity less than 0.'
                    End Case
                end    
            end else
                ErrorMessage = 'Error in Increase Lot Wafer Count service, Lot Id ' : LotId : ' is currently on hold.'
            end
        end else
            ErrorMessage = 'Error in Increase Lot Wafer Count service, Lot Id ' : LotId : ' is closed.'
        end
        
    end else
       ErrorMessage = 'Error in Increase Lot Wafer Count service, Lot Id ' : LotId : ' not found in lot table.' 
    end
    if ErrorMessage NE '' then
        Error_Services('Add', ErrorMessage)
    end
end service

Service OpenOIWizardCreateTWLotInBrowser()
    Command = 'explorer https://goto.infineon.com/oiwizard/Lot/CreateTestWaferLot/'
    SRP_Run_Command(Command)
end service