compile insert QUOTE_SPEC_EQU
* These are equates for the spec_substrate field in the prod_spec table
* so they are the @vm positions. This is used when defining spec information
* for a particular prod_spec

equ QSSubOrientation$      to 1
equ QSSubType$             to 2
equ QSSubWafersize$        to 3
equ QSSubResistivity$      to 4
equ QSSubResUnits$         to 5
equ QSSubDopant$           to 6
equ QSSubPreClean$         to 7
equ QSSubBl1Dopant$        to 8
equ QSSubBl2Dopant$        to 9
equ QSSubOxide$            to 10
equ QSSubPostClean$        to 11
equ QSSubBackseal$         to 12
equ QSSubMfg$              to 13	;* appears dead 2/8/2011 JCH (no data found)
equ QSSubSubstrate$        to 14 
equ QSSubInstructions$     to 15
equ QSSubNotUsed$          to 16
equ QSSubWafersSupBy$      to 17
equ QSSubSpecType$         to 18
equ QSSubPolish$           to 19
equ QSSubProduct$          to 20
equ QSSubBl3Dopant$        to 21
equ QSSubOxideAngstroms$   to 22
equ QSSubPreAkrionRecipe$  to 23
equ QSSubPostAkrionRecipe$ to 24 
equ QSSubThickness		   to 25 

* each reactor layer is delimited by char(248)
* now these are the equates for the spec_epi field in the prod_spec table
* so they are the @vm positions.

equ QSEpiConcMinThick$  to 1 ;* could have @svm - No @SVM's found or used in data. Fixing code as found 1/16/2009 JCH
equ QSEpiConcMaxThick$  to 2 ;* could have @svm
equ QSEpiConcUnits$     to 3
equ QSEpiResMinThick$   to 4
equ QSEpiResMaxThick$   to 5
equ QSEpiResUnits$      to 6
equ QSEpiMinThick$      to 7
equ QSEpiMaxThick$      to 8
equ QSEpiThickUnits$    to 9
equ QSEpiDopant$        to 10
equ QSEpiRecipe$        to 11
equ QSEpiRecipeName$    to 12
equ QSEpiThickMeasure$  to 13	;* Further delimited with '~' into tool,type,recipe,freq,provein,first,last,spc,overgrow,exp_tw_qty,pattern
equ QSEpiResMeasure$    to 14	;* Further delimited with '~' into tool,type,recipe,freq,provein,first,last,spc,overgrow
equ QSEpiConcMeasure$   to 15	;* Further delimited with '~' into tool,type,recipe,freq,provein,first,last,spc,overgrow
equ QSEpiCresMin$		to 16	;* Added 1/16/2009 JCH - HgCv1 measured resistance for calculation of Concentration
equ QSEpiCresMax$		to 17	;* Added 1/16/2009 JCH - HgCv1 measured resistance for calculation of Concentration
equ QSEpiCresUnits$		to 18	;* Added 1/16/2009 JCH - HgCv1 measured resistance for calculation of Concentration 
equ QSEpiCresMeasure$	to 19	;* Added 1/16/2009 JCH - HgCv1 measured resistance for calculation of Concentration 
equ QSEpiCresPhaseMin$	to 20

* These are equates for the spec_addtl field in the prod_spec table
* so they are the @vm positions. This is used when defining spec information
* for a particular prod_spec

equ QSAddProveInInst$    to 1		;* Changed on 8/22/2012 JCH
equ QSAddStressMeasure$  to 2
equ QSAddTransMeasure$   to 3
equ QSAddStressMin$      to 4
equ QSAddStressMax$      to 5
equ QSAddTransSpec$      to 6

* These are the equates for the spec_new_dev field in the prod_spec table
* so they are the @vm postions.  This is used when defining spec as 
* new development
equ QSNewDevInst$         to 1
equ QSNewDevExpPlan$      to 2
equ QSNewDevTestResults$  to 3
equ QSNewDevSpecialInst$  to 4

* These are the equates for the spec_pre_prod field in the prod_spec table
* so they are the @vm postions.  This is used when defining spec as 
* new pre production
equ QSPreProdInst$        to 1
equ QSPreProdSpecialInst$ to 2
equ QSPreProdProveIn$     to 3