Function RECURRING_TASK_SPEC_Actions(Action, CalcColName, FSList, Handle, Name, FMC, Record, Status, OrigRecord, Param1, Param2, Param3, Param4, Param5, Param6, Param7, Param8, Param9, Param10) #pragma precomp SRP_PreCompiler /*********************************************************************************************************************** This program is proprietary and is not to be used by or disclosed to others, nor is it to be copied without written permission from Infineon. Name : RECURRING_TASK_SPEC_Actions Description : Handles calculated columns and MFS calls for the current table. Notes : This function uses @ID, @RECORD, and @DICT to make sure {ColumnName} references work correctly. If called from outside of a calculated column these will need to be set and restored. Parameters : Action [in] -- Name of the action to be taken CalcColName [in] -- Name of the calculated column that needs to be processed. Normally this should only be populated when the CalcField action is being used. FSList [in] -- The list of MFSs and the BFS name for the current file or volume. This is an @SVM delimited array, with the current MFS name as the first value in the array, and the BFS name as the last value. Normally set by a calling MFS. Handle [in] -- The file handle of the file or media map being accessed. Note, this does contain the entire handle structure that the Basic+ Open statement would provide. Normally set by a calling MFS. Name [in] -- The name (key) of the record or file being accessed. Normally set by a calling MFS. FMC [in] -- Various functions. Normally set by a calling MFS. Record [in] -- The entire record (for record-oriented functions) or a newly-created handle (for "get handle" functions). Normally set by a calling MFS. Status [in/out] -- Indicator of the success or failure of an action. Normally set by the calling MFS but for some actions can be set by the action handler to indicate failure. OrigRecord [in] -- Original content of the record being processed by the current action. This is automatically being assigned by the WRITE_RECORD and DELETE_RECORD actions within BASE_MFS. Param1-10 [in/out] -- Additional request parameter holders ActionFlow [out] -- Used to control the action chain (see the ACTION_SETUP insert for more information.) Can also be used to return a special value, such as the results of the CalcField method. History : (Date, Initials, Notes) 08/25/23 jro Original programmer. ***********************************************************************************************************************/ $insert APP_INSERTS $insert FILE.SYSTEM.EQUATES $insert ACTION_SETUP $insert RECURRING_TASK_EQUATES $insert RECURRING_TASK_SPEC_EQUATES $insert RLIST_EQUATES $insert PM_SCHED_EQUATES $insert TOOL_EQUATES Equ Comma$ to ',' Declare function Error_Services, Database_Services, Environment_Services, Obj_RECURRING_TASK_SPEC Declare function SRP_Array, SRP_Datetime Declare subroutine Error_Services, Database_Services, Environment_Services, Logging_Services Declare subroutine RList If KeyID then GoSub Initialize_System_Variables Begin Case Case Action _EQC 'CalculateColumn' ; GoSub CalculateColumn Case Action _EQC 'READ_RECORD_PRE' ; GoSub READ_RECORD_PRE Case Action _EQC 'READ_RECORD' ; GoSub READ_RECORD Case Action _EQC 'READONLY_RECORD_PRE' ; GoSub READONLY_RECORD_PRE Case Action _EQC 'READONLY_RECORD' ; GoSub READONLY_RECORD Case Action _EQC 'WRITE_RECORD_PRE' ; GoSub WRITE_RECORD_PRE Case Action _EQC 'WRITE_RECORD' ; GoSub WRITE_RECORD Case Action _EQC 'DELETE_RECORD_PRE' ; GoSub DELETE_RECORD_PRE Case Action _EQC 'DELETE_RECORD' ; GoSub DELETE_RECORD Case Otherwise$ ; Status = 'Invalid Action' End Case If KeyID then GoSub Restore_System_Variables If Assigned(ActionFlow) else ActionFlow = ACTION_CONTINUE$ Return ActionFlow // ----- Calculated Columns -------------------------------------------------------------------------------------------- // // The typical structure of a calculated column will look like this: // // Declare function TableName_Actions // // A = {COL1} ; * Reference as many data columns in this way to ensure the dictionary dependency is generated. // // @ANS = TableName_Actions('CalcField', 'CalcColName') // // --------------------------------------------------------------------------------------------------------------------- CalculateColumn: // Make sure the ActionFlow return variable is cleared in case nothing is calculated. ActionFlow = '' Begin Case Case CalcColName EQ 'EARLY_START' ; GoSub EARLY_START Case CalcColName EQ 'LAST_PM_DTM' ; GoSub LAST_PM_DTM Case CalcColName EQ 'LATE_START' ; GoSub LATE_START Case CalcColName EQ 'NEXT_PM_DT' ; GoSub NEXT_PM_DT Case CalcColName EQ 'PM_DTM' ; GoSub PM_DTM Case CalcColName EQ 'PM_STATUS' ; GoSub PM_STATUS Case CalcColName EQ 'SCHED_START' ; GoSub SCHED_START Case CalcColName EQ 'TOOL_CYCLE_CNT' ; GoSub TOOL_CYCLE_CNT Case CalcColName EQ 'TOOL_DESC' ; GoSub TOOL_DESC Case CalcColName EQ 'TOOL_LOCATION' ; GoSub TOOL_LOCATION Case CalcColName EQ 'TOOL_TYPE' ; GoSub TOOL_TYPE End Case return EARLY_START: ActionFlow = obj_recurring_task_spec('EarlyStart',@ID:@RM:@RECORD) return LAST_PM_DTM: ActionFlow = obj_recurring_task_spec('LastPMCompDTM',@ID) return LATE_START: ActionFlow = obj_recurring_task_spec('LateStart',@ID:@RM:@RECORD) return NEXT_PM_DT: ActionFlow = '' return PM_DTM: PMKeys = @RECORD<18> Ans = '' pmCnt = COUNT(PMKeys,@VM) + (PMKeys NE '') FOR I = 1 TO pmCnt Ans<1,I> = PMKeys<1,I>[-1,'B*'] NEXT I ActionFlow = Ans return PM_STATUS: PMKeys = @RECORD<18> ActionFlow = XLATE('RECURRING_TASK',PMKeys,'STATUS','X') return SCHED_START: ActionFlow = obj_recurring_task_spec('SchedStart',@ID:@RM:@RECORD) return TOOL_CYCLE_CNT: ToolID = @RECORD ActionFlow = XLATE('TOOL',ToolID,TOOL_CYCLE_CNT$,'X') return TOOL_DESC: ToolID = @RECORD ActionFlow = XLATE('TOOL',ToolID,TOOL_TOOL_DESC$,'X') return TOOL_LOCATION: ToolID = @RECORD ActionFlow = XLATE('TOOL',ToolID,'LOCATION','X') return TOOL_TYPE: ToolID = @RECORD ActionFlow = XLATE('TOOL',ToolID,TOOL_TOOL_TYPE$,'X') return // ----- MFS calls ----------------------------------------------------------------------------------------------------- READ_RECORD_PRE: // In order to stop a record from being read in this action these lines of code must be used: // // OrigFileError = 100 : @FM : KeyID // Status = 0 // Record = '' // ActionFlow = ACTION_STOP$ return READ_RECORD: // In order to stop a record from being read in this action these lines of code must be used: // // OrigFileError = 100 : @FM : KeyID // Status = 0 // Record = '' * LockOwner = Record * If LockOwner EQ '' then Record = @User4 * If @User4 EQ 'DANIEL_ST' then * Database_Services('WriteDataRow', 'LOCKS', @Station:'*WO_MAT*':Name, '') * end return READONLY_RECORD_PRE: // In order to stop a record from being read in this action these lines of code must be used: // // OrigFileError = 100 : @FM : KeyID // Status = 0 // Record = '' // ActionFlow = ACTION_STOP$ return READONLY_RECORD: // In order to stop a record from being read in this action these lines of code must be used: // // OrigFileError = 100 : @FM : KeyID // Status = 0 // Record = '' return WRITE_RECORD_PRE: return WRITE_RECORD: return DELETE_RECORD_PRE: return DELETE_RECORD: return // ----- Internal Methods ---------------------------------------------------------------------------------------------- Initialize_System_Variables: // Save these for restoration later SaveDict = @DICT SaveID = @ID SaveRecord = @RECORD OrigFileError = @FILE.ERROR // Now make sure @DICT, ID, and @RECORD are populated CurrentDictName = '' If @DICT then DictHandle = @DICT<1, 2> Locate DictHandle in @TABLES(5) Using @FM Setting fPos then CurrentDictName = Field(@TABLES(0), @FM, fPos, 1) end end If CurrentDictName NE DictName then Open DictName to @DICT else Status = 'Unable to initialize @DICT' end @ID = KeyID If Record else // Record might not have been passed in. Read the record from the database table just to make sure. @FILE.ERROR = '' Open TableName to hTable then FullFSList = hTable[1, 'F' : @VM] BFS = FullFSList[-1, 'B' : @SVM] LastHandle = hTable[-1, 'B' : \0D\] FileHandle = \0D\ : LastHandle[1, @VM] Call @BFS(READO.RECORD, BFS, FileHandle, KeyID, FMC, Record, ReadOStatus) end end @RECORD = Record return Restore_System_Variables: Transfer SaveDict to @DICT Transfer SaveID to @ID Transfer SaveRecord to @RECORD @FILE.ERROR = OrigFileError return