Add Hyphen

Skip Tests
Dual write PDSF for Metrology Viewer
Removed IQS.Copy
Version Error Message
Added Climatec to Test.cs
GetJobIdDirectory
Remove and

.gitignore

@@ -342,3 +342,4 @@ ASALocalRun/
 *.lnk
 
 .kanbn
+Adaptation/.kanbn

.vscode/mklink.md

@@ -1,11 +0,0 @@
----
-type: "note"
-created: "2023-10-20T03:52:57.401Z"
-updated: "2023-10-20T03:53:49.161Z"
----
-
-# mklink
-
-```bash
-mklink /J "L:\Workspaces\33_CS29_79_72\MIT_EAF_Adaptations\Trunk\MET08DDUPSP1TBI\06_SourceCode\MET08DDUPSP1TBI\.kanbn" "D:\5-Other-Small\Kanban\MET08DDUPSP1TBI"
-```

Adaptation/.editorconfig

@@ -100,6 +100,7 @@ dotnet_diagnostic.CA1846.severity = none # CA1846: Prefer AsSpan over Substring
 dotnet_diagnostic.CA1847.severity = none # CA1847: Use string.Contains(char) instead of string.Contains(string) with single characters
 dotnet_diagnostic.CA1854.severity = warning # CA1854: Prefer a 'TryGetValue' call over a Dictionary indexer access guarded by a 'ContainsKey' check to avoid double lookup
 dotnet_diagnostic.CA1860.severity = error # CA1860: Prefer comparing 'Count' to 0 rather than using 'Any()', both for clarity and for performance
+dotnet_diagnostic.CA1861.severity = none # CA1861: Prefer 'static readonly' fields over constant array arguments
 dotnet_diagnostic.CA1862.severity = none # CA1862: Prefer using 'string.Equals(string, StringComparison)' to perform a case-insensitive comparison, but keep in mind that this might cause subtle changes in behavior, so make sure to conduct thorough testing after applying the suggestion, or if culturally sensitive comparison is not required, consider using 'StringComparison.OrdinalIgnoreCase'
 dotnet_diagnostic.CA1864.severity = none # CA1864: To avoid double lookup, call 'TryAdd' instead of calling 'Add' with a 'ContainsKey' guard
 dotnet_diagnostic.CA1866.severity = none # CA1866: Use 'string.EndsWith(char)' instead of 'string.EndsWith(string)' when you have a string with a single char

Adaptation/.kanbn/index.md

@@ -1,11 +1,13 @@
 ---
-type: kanbn
+type: "Kanban"
 startedColumns:
   - 'In Progress'
 completedColumns:
   - Done
 dateFormat: mm/dd
 taskTemplate: '^+^_${overdue ? ''^R'' : ''''}${name}^: ${relations ? (''\n^-^/^g'' + relations.reduce((accumulator, currentValue) => accumulator.task + currentValue.task + '' '', '''')) : ''''}'
+created: "2024-04-11T15:50:50.874Z"
+updated: "2024-04-11T16:10:05.831Z"
 ---
 
 # MET08DDUPSP1TBI

Adaptation/.vscode/launch.json

@@ -4,7 +4,7 @@
       "name": ".NET Core Attach",
       "type": "coreclr",
       "request": "attach",
-      "processId": 23684
+      "processId": 21440
     }
   ]
 }

Adaptation/.vscode/mklink.md

@@ -0,0 +1,9 @@
+---
+type: "note"
+---
+
+# mklink
+
+```bash
+mklink /J "T:\MET08RESIHGCV\06_SourceCode\MET08RESIHGCV\Adaptation\.kanbn" "D:\5-Other-Small\Kanban\MET08RESIHGCV"
+```

Adaptation/.vscode/tasks.json

@@ -12,6 +12,28 @@
             ],
             "problemMatcher": "$msCompile"
         },
+        {
+            "label": "Test-Debug",
+            "command": "dotnet",
+            "type": "process",
+            "args": [
+                "test",
+                "-c",
+                "Debug"
+            ],
+            "problemMatcher": "$msCompile"
+        },
+        {
+            "label": "Test-Release",
+            "command": "dotnet",
+            "type": "process",
+            "args": [
+                "test",
+                "-c",
+                "Release"
+            ],
+            "problemMatcher": "$msCompile"
+        },
         {
             "label": "Format",
             "command": "dotnet",
@@ -46,7 +68,7 @@
             "args": [
                 "/target:Build",
                 "/restore:True",
-                "/p:RestoreSources=https://api.nuget.org/v3/index.json%3Bhttps://packagemanagement.eu.infineon.com:4430/api/v2/%3Bhttps://tfs.intra.infineon.com/tfs/ManufacturingIT/_packaging/eaf/nuget/v3/index.json%3Bhttps://localhost/v3/index.json",
+                "/p:RestoreSources=https://artifactory.intra.infineon.com/artifactory/api/nuget/ngt-fi-package-main-vir/%3Bhttps://packagemanagement.eu.infineon.com:4430/api/v2/%3Bhttps://tfs.intra.infineon.com/tfs/ManufacturingIT/_packaging/eaf/nuget/v3/index.json%3Bhttps://tfs.intra.infineon.com/tfs/FactoryIntegration/_packaging/EAF%40Local/nuget/v3/index.json%3Bhttps://api.nuget.org/v3/index.json",
                 "/detailedsummary",
                 "/consoleloggerparameters:PerformanceSummary;ErrorsOnly;",
                 "/property:Configuration=Debug;TargetFrameworkVersion=v4.8",
@@ -57,7 +79,7 @@
         {
             "label": "File-Folder-Helper AOT s M .Kanbn Tasks",
             "type": "shell",
-            "command": "& L:/DevOps/Mesa_FI/File-Folder-Helper/bin/Release/net8.0/win-x64/publish/File-Folder-Helper.exe s M T:/MET08DDUPSP1TBI/06_SourceCode/MET08DDUPSP1TBI/Adaptation -s T:/MET08DDUPSP1TBI/06_SourceCode/MET08DDUPSP1TBI/Adaptation/.kanbn/tasks",
+            "command": "L:/DevOps/Mesa_FI/File-Folder-Helper/bin/Release/net8.0/win-x64/publish/File-Folder-Helper.exe s M T:/MET08DDUPSP1TBI/06_SourceCode/MET08DDUPSP1TBI/Adaptation -s T:/MET08DDUPSP1TBI/06_SourceCode/MET08DDUPSP1TBI/Adaptation/.kanbn/tasks",
             "problemMatcher": []
         },
         {

Adaptation/FileHandlers/OpenInsight/FileRead.cs

@@ -26,8 +26,8 @@ public class FileRead : Shared.FileRead, IFileRead
         base(new Description(), false, smtp, fileParameter, cellInstanceName, connectionCount, cellInstanceConnectionName, fileConnectorConfiguration, equipmentTypeName, parameterizedModelObjectDefinitionType, modelObjectParameters, equipmentDictionaryName, dummyRuns, staticRuns, useCyclicalForDescription, isEAFHosted: connectionCount is null)
     {
         _MinFileLength = 10;
-        _NullData = string.Empty;
         _Logistics = new(this);
+        _NullData = string.Empty;
         if (_FileParameter is null)
             throw new Exception(cellInstanceConnectionName);
         if (_ModelObjectParameterDefinitions is null)
@@ -195,8 +195,8 @@ public class FileRead : Shared.FileRead, IFileRead
             bool save = string.IsNullOrEmpty(_LastLines) || check != _LastLines;
             if (save && !string.IsNullOrEmpty(check))
             {
-                _LastLines = check;
                 long? subGroupId;
+                _LastLines = check;
                 long breakAfter = dateTime.AddSeconds(_BreakAfterSeconds).Ticks;
                 long preWait = _FileConnectorConfiguration?.FileHandleWaitTime is null ? dateTime.AddMilliseconds(1234).Ticks : dateTime.AddMilliseconds(_FileConnectorConfiguration.FileHandleWaitTime.Value).Ticks;
                 if (string.IsNullOrEmpty(descriptions[0].Reactor) || string.IsNullOrEmpty(descriptions[0].PSN))

Adaptation/FileHandlers/OpenInsight/FromIQS.cs

@@ -226,6 +226,99 @@ public class FromIQS
             File.WriteAllText(checkFile, json);
     }
 
+    private static string GetCommandText(string[] iqsCopyValues)
+    { // cSpell:disable
+        StringBuilder result = new();
+        if (iqsCopyValues.Length != 4)
+            throw new NotSupportedException();
+        string find = iqsCopyValues[1];
+        string replace = iqsCopyValues[3];
+        _ = result
+            .AppendLine(" select pd.f_name [Part Name], ")
+            .AppendLine("        null [Part Revision], ")
+            .Append(" '").Append(replace).AppendLine("' [Test Name], ")
+            .AppendLine("        null [Description], ")
+            .AppendLine("        null [Lot Number], ")
+            .AppendLine("        null [Job Name], ")
+            .AppendLine("        null [Process Name], ")
+            .AppendLine("        case when sl.f_url = 0 then null else sl.f_url end [Reasonable Limit (Upper)], ")
+            .AppendLine("        case when sl.f_url = 0 then 0 else 1 end [Alarm Reasonable Limit (Upper)], ")
+            .AppendLine("        case when sl.f_usl = 0 then null else sl.f_usl end [Specification Limit (Upper)], ")
+            .AppendLine("        case when sl.f_usl = 0 then 0 else 1 end [Alarm Specification Limit (Upper)], ")
+            .AppendLine("        case when sl.f_ugb = 0 then null else sl.f_ugb end [Warning Limit (Upper)], ")
+            .AppendLine("        case when sl.f_ugb = 0 then 0 else 1 end [Alarm Warning Limit (Upper)], ")
+            .AppendLine("        case when sl.f_tar = 0 then null else sl.f_tar end [Specification Limit (Target)], ")
+            .AppendLine("        case when sl.f_lgb = 0 then null else sl.f_lgb end [Warning Limit (Lower)], ")
+            .AppendLine("        case when sl.f_lgb = 0 then 0 else 1 end [Alarm Warning Limit (Lower)], ")
+            .AppendLine("        case when sl.f_lsl = 0 then null else sl.f_lsl end [Specification Limit (Lower)], ")
+            .AppendLine("        case when sl.f_lsl = 0 then 0 else 1 end [Alarm Specification Limit (Lower)], ")
+            .AppendLine("        case when sl.f_lrl = 0 then null else sl.f_lrl end [Reasonable Limit (Lower)], ")
+            .AppendLine("        case when sl.f_lrl = 0 then 0 else 1 end [Alarm Reasonable Limit (Lower)], ")
+            .AppendLine("        td.f_name [Original Test Name], ")
+            .AppendLine("        td.f_test [Test Id], ")
+            .AppendLine("        ( ")
+            .AppendLine("          select count(sl_b.f_spec) ")
+            .AppendLine("          from [spcepiworld].[dbo].[spec_lim] sl_b ")
+            .AppendLine("          join [spcepiworld].[dbo].[part_dat] pd_b ")
+            .AppendLine("          on sl_b.f_part = pd_b.f_part ")
+            .AppendLine("          join [spcepiworld].[dbo].[test_dat] td_b ")
+            .AppendLine("          on sl_b.f_test = td_b.f_test ")
+            .AppendLine("          where sl_b.f_prcs = 0 ")
+            .Append(" and td_b.f_name = '").Append(replace).AppendLine("' ")
+            .AppendLine("          and pd_b.f_name = pd.f_name ")
+            .AppendLine("          and sl_b.f_url = sl.f_url ")
+            .AppendLine("          and sl_b.f_usl = sl.f_usl ")
+            .AppendLine("          and sl_b.f_ugb = sl.f_ugb ")
+            .AppendLine("          and sl_b.f_tar = sl.f_tar ")
+            .AppendLine("          and sl_b.f_lgb = sl.f_lgb ")
+            .AppendLine("          and sl_b.f_lsl = sl.f_lsl ")
+            .AppendLine("          and sl_b.f_lrl = sl.f_lrl ")
+            .AppendLine("          group by sl_b.f_spec ")
+            .AppendLine("        ) count ")
+            .AppendLine(" from [spcepiworld].[dbo].[spec_lim] sl ")
+            .AppendLine(" join [spcepiworld].[dbo].[part_dat] pd ")
+            .AppendLine("   on sl.f_part = pd.f_part ")
+            .AppendLine(" join [spcepiworld].[dbo].[test_dat] td ")
+            .AppendLine("   on sl.f_test = td.f_test ")
+            .AppendLine(" where sl.f_prcs = 0 ")
+            .Append("   and td.f_name = '").Append(find).AppendLine("' ")
+            .AppendLine("   and isnull(( ")
+            .AppendLine("        select count(sl_b.f_spec) ")
+            .AppendLine("        from [spcepiworld].[dbo].[spec_lim] sl_b ")
+            .AppendLine("        join [spcepiworld].[dbo].[part_dat] pd_b ")
+            .AppendLine("        on sl_b.f_part = pd_b.f_part ")
+            .AppendLine("        join [spcepiworld].[dbo].[test_dat] td_b ")
+            .AppendLine("        on sl_b.f_test = td_b.f_test ")
+            .AppendLine("        where sl_b.f_prcs = 0 ")
+            .Append(" and td_b.f_name = '").Append(replace).AppendLine("' ")
+            .AppendLine("        and pd_b.f_name = pd.f_name ")
+            .AppendLine("        and sl_b.f_url = sl.f_url ")
+            .AppendLine("        and sl_b.f_usl = sl.f_usl ")
+            .AppendLine("        and sl_b.f_ugb = sl.f_ugb ")
+            .AppendLine("        and sl_b.f_tar = sl.f_tar ")
+            .AppendLine("        and sl_b.f_lgb = sl.f_lgb ")
+            .AppendLine("        and sl_b.f_lsl = sl.f_lsl ")
+            .AppendLine("        and sl_b.f_lrl = sl.f_lrl ")
+            .AppendLine("        group by sl_b.f_spec ")
+            .AppendLine("   ), 0) = 0 ")
+            .AppendLine(" for json path ");
+        return result.ToString();
+    } // cSpell:restore
+
+    internal static void SaveCopy(string fileConnectorConfigurationSourceFileLocation, string connectionString, string name, string[] iqsCopyValues)
+    {
+        string checkFile = Path.Combine(fileConnectorConfigurationSourceFileLocation, $"{name}.json");
+        if (!File.Exists(checkFile))
+        {
+            string commandText = GetCommandText(iqsCopyValues);
+            StringBuilder stringBuilder = GetForJsonPath(connectionString, commandText);
+            if (stringBuilder.Length != 0)
+                File.WriteAllText(checkFile, stringBuilder.ToString());
+            else
+                File.WriteAllText(Path.Combine(fileConnectorConfigurationSourceFileLocation, $"{name}.sql"), commandText);
+        }
+    }
+
 #nullable disable
 
 }

Adaptation/FileHandlers/OpenInsightMetrologyViewer/FileRead.cs

@@ -31,8 +31,8 @@ public class FileRead : Shared.FileRead, IFileRead
             throw new Exception(cellInstanceConnectionName);
         if (!_IsDuplicator)
             throw new Exception(cellInstanceConnectionName);
-        _OpenInsightMetrologyViewerFileShare = @"\\mesfs.infineon.com\EC_Metrology_Si\MetrologyAttachments\SP1RunHeader_";
         _OpenInsightMetrologyViewerAPI = GetPropertyValue(cellInstanceConnectionName, modelObjectParameters, "OpenInsight.MetrologyViewerAPI");
+        _OpenInsightMetrologyViewerFileShare = GetPropertyValue(cellInstanceConnectionName, modelObjectParameters, "OpenInsight.MetrologyViewerFileShare");
     }
 
     void IFileRead.Move(Tuple<string, Test[], JsonElement[], List<FileInfo>> extractResults, Exception exception)
@@ -112,16 +112,15 @@ public class FileRead : Shared.FileRead, IFileRead
 
     private void SendData(string reportFullPath, DateTime dateTime, List<txt.Description> descriptions)
     {
+        string checkDirectory;
+        WSRequest wsRequest = new(this, _Logistics, descriptions);
         int weekOfYear = _Calendar.GetWeekOfYear(dateTime, CalendarWeekRule.FirstDay, DayOfWeek.Sunday);
-        string directory = Path.Combine(_OpenInsightMetrologyViewerFileShare, dateTime.Year.ToString(), $"WW{weekOfYear:00}", _Logistics.Sequence.ToString());
+        string directory = Path.Combine(_OpenInsightMetrologyViewerFileShare, dateTime.Year.ToString(), $"WW{weekOfYear:00}");
-        if (!Directory.Exists(directory))
+        checkDirectory = Path.Combine(directory, _Logistics.Sequence.ToString());
-            _ = Directory.CreateDirectory(directory);
+        if (!Directory.Exists(checkDirectory))
-        string fullPath = Path.Combine(directory, Path.GetFileName(reportFullPath));
+            _ = Directory.CreateDirectory(checkDirectory);
-        if (File.Exists(fullPath))
+        File.Copy(reportFullPath, Path.Combine(checkDirectory, Path.GetFileName(reportFullPath)), overwrite: true);
-            File.Delete(fullPath);
+        (string jsonResults, WS.Results wsResults) = WS.SendData(_OpenInsightMetrologyViewerAPI, _Logistics.Sequence, directory, wsRequest);
-        File.Copy(reportFullPath, fullPath);
-        WSRequest wsRequest = new(this, _Logistics, descriptions, fullPath);
-        (string json, WS.Results wsResults) = WS.SendData(_OpenInsightMetrologyViewerAPI, wsRequest);
         if (!wsResults.Success)
             throw new Exception(wsResults.ToString());
         _Log.Debug(wsResults.HeaderID);
@@ -129,8 +128,12 @@ public class FileRead : Shared.FileRead, IFileRead
         {
             if (!_StaticRuns.ContainsKey(_Logistics.Sequence))
                 _StaticRuns.Add(_Logistics.Sequence, new());
-            _StaticRuns[_Logistics.Sequence].Add(json);
+            _StaticRuns[_Logistics.Sequence].Add(jsonResults);
         }
+        checkDirectory = Path.Combine(directory, $"-{wsResults.HeaderID}");
+        if (!Directory.Exists(checkDirectory))
+            _ = Directory.CreateDirectory(checkDirectory);
+        File.Copy(reportFullPath, Path.Combine(checkDirectory, Path.GetFileName(reportFullPath)), overwrite: true);
     }
 
     private Tuple<string, Test[], JsonElement[], List<FileInfo>> GetExtractResult(string reportFullPath, DateTime dateTime)

Adaptation/FileHandlers/OpenInsightMetrologyViewer/WSRequest.cs

@@ -268,7 +268,6 @@ public class WSRequest
     public string DwnSlipMin { get; set; }
     public string DwnSlipStDev { get; set; }
     public List<txt.Detail> Details { get; protected set; }
-    public string ProcessDataStandardFormat { get; set; }
 
     [Obsolete("For json")] public WSRequest() { }
 
@@ -276,7 +275,6 @@ public class WSRequest
     internal WSRequest(IFileRead fileRead, Logistics logistics, List<txt.Description> descriptions, string processDataStandardFormat = null)
 #pragma warning restore IDE0060
     {
-        ProcessDataStandardFormat = processDataStandardFormat;
         Id = -1;
         Details = new List<txt.Detail>();
         CellName = logistics.MesEntity;
@@ -634,22 +632,29 @@ public class WSRequest
         return result;
     }
 
-#pragma warning disable IDE0060
+    internal static long GetHeaderId(IFileRead fileRead, Logistics logistics, string openInsightMetrologyViewerAPI, DateTime dateTime, int weekOfYear, string json, List<txt.Description> descriptions)
-    internal static void PostOpenInsightMetrologyViewerAttachments(IFileRead fileRead, Logistics logistics, string openInsightMetrologyViewerAPI, string ghostPCLFileName, DateTime dateTime, string json, List<txt.Description> descriptions, string matchDirectory)
-#pragma warning restore IDE0060
     {
+        long result;
         if (string.IsNullOrEmpty(json))
         {
-            WSRequest wsRequest = new(fileRead, logistics, descriptions, string.Empty);
+            WSRequest wsRequest = new(fileRead, logistics, descriptions);
-            (json, WS.Results wsResults) = WS.SendData(openInsightMetrologyViewerAPI, wsRequest);
+            string directory = Path.Combine(openInsightMetrologyViewerAPI, dateTime.Year.ToString(), $"WW{weekOfYear:00}");
+            (json, WS.Results wsResults) = WS.SendData(openInsightMetrologyViewerAPI, logistics.Sequence, directory, wsRequest);
             if (!wsResults.Success)
                 throw new Exception(wsResults.ToString());
         }
         WS.Results metrologyWSRequest = JsonSerializer.Deserialize<WS.Results>(json, new JsonSerializerOptions { PropertyNameCaseInsensitive = true });
-        long wsResultsHeaderID = metrologyWSRequest.HeaderID;
+        result = metrologyWSRequest.HeaderID;
+        return result;
+    }
+
+#pragma warning disable IDE0060
+    internal static void PostOpenInsightMetrologyViewerAttachments(IFileRead fileRead, Logistics logistics, string openInsightMetrologyViewerAPI, string ghostPCLFileName, List<txt.Description> descriptions, string matchDirectory, string subGroupId, long headerId, string headerIdDirectory)
+#pragma warning restore IDE0060
+    {
         string[] summaryFiles = Directory.GetFiles(matchDirectory, "*.txt", SearchOption.TopDirectoryOnly);
         if (summaryFiles.Length != 1)
-            throw new Exception($"Invalid source file count for <{wsResultsHeaderID}>!{Environment.NewLine}{json}");
+            throw new Exception($"Invalid source file count for <{headerId}>!");
         string[] prnFiles = Directory.GetFiles(matchDirectory, "WaferMap*.prn", SearchOption.TopDirectoryOnly);
         List<string> pdfFiles = new();
         foreach (string prnFile in prnFiles.OrderBy(l => l))
@@ -658,7 +663,9 @@ public class WSRequest
             throw new Exception("Invalid *.pdf file count!");
         List<WS.Attachment> dataAttachments = new();
         List<WS.Attachment> headerAttachments = new()
-        { new WS.Attachment(descriptions[0].HeaderUniqueId, "Data.txt", summaryFiles[0]) };
+        {
+            new WS.Attachment(subGroupId, headerId, headerIdDirectory, descriptions[0].HeaderUniqueId, "Data.txt", summaryFiles[0])
+        };
         int count;
         if (pdfFiles.Count < descriptions.Count)
             count = pdfFiles.Count;
@@ -667,11 +674,11 @@ public class WSRequest
         for (int i = 0; i < count; i++)
         {
             if (!string.IsNullOrEmpty(pdfFiles[i]))
-                dataAttachments.Add(new WS.Attachment(descriptions[i].UniqueId, "Image.pdf", pdfFiles[i]));
+                dataAttachments.Add(new WS.Attachment(subGroupId, headerId, headerIdDirectory, descriptions[i].UniqueId, "Image.pdf", pdfFiles[i]));
         }
         if (dataAttachments.Count == 0 || dataAttachments.Count != descriptions.Count)
             throw new Exception($"Invalid attachment count! {dataAttachments.Count} != {descriptions.Count}");
-        WS.AttachFiles(openInsightMetrologyViewerAPI, wsResultsHeaderID, headerAttachments, dataAttachments);
+        WS.AttachFiles(openInsightMetrologyViewerAPI, headerAttachments, dataAttachments);
     }
 
 }

Adaptation/FileHandlers/OpenInsightMetrologyViewerAttachments/FileRead.cs

@@ -5,6 +5,7 @@ using Adaptation.Shared.Duplicator;
 using Adaptation.Shared.Methods;
 using System;
 using System.Collections.Generic;
+using System.Globalization;
 using System.IO;
 using System.Linq;
 using System.Text.Json;
@@ -14,9 +15,9 @@ namespace Adaptation.FileHandlers.OpenInsightMetrologyViewerAttachments;
 public class FileRead : Shared.FileRead, IFileRead
 {
 
-    private readonly string _JobIdParentDirectory;
     private readonly string _GhostPCLFileName;
     private readonly string _OpenInsightMetrologyViewerAPI;
+    private readonly string _OpenInsightMetrologyViewerFileShare;
 
     public FileRead(ISMTP smtp, Dictionary<string, string> fileParameter, string cellInstanceName, int? connectionCount, string cellInstanceConnectionName, FileConnectorConfiguration fileConnectorConfiguration, string equipmentTypeName, string parameterizedModelObjectDefinitionType, IList<ModelObjectParameterDefinition> modelObjectParameters, string equipmentDictionaryName, Dictionary<string, List<long>> dummyRuns, Dictionary<long, List<string>> staticRuns, bool useCyclicalForDescription, bool isEAFHosted) :
         base(new Description(), false, smtp, fileParameter, cellInstanceName, connectionCount, cellInstanceConnectionName, fileConnectorConfiguration, equipmentTypeName, parameterizedModelObjectDefinitionType, modelObjectParameters, equipmentDictionaryName, dummyRuns, staticRuns, useCyclicalForDescription, isEAFHosted: connectionCount is null)
@@ -30,8 +31,8 @@ public class FileRead : Shared.FileRead, IFileRead
             throw new Exception(cellInstanceConnectionName);
         if (!_IsDuplicator)
             throw new Exception(cellInstanceConnectionName);
-        _JobIdParentDirectory = GetJobIdParentDirectory(_FileConnectorConfiguration.SourceFileLocation);
         _OpenInsightMetrologyViewerAPI = GetPropertyValue(cellInstanceConnectionName, modelObjectParameters, "OpenInsight.MetrologyViewerAPI");
+        _OpenInsightMetrologyViewerFileShare = GetPropertyValue(cellInstanceConnectionName, modelObjectParameters, "OpenInsight.MetrologyViewerFileShare");
         _GhostPCLFileName = Path.Combine(AppContext.BaseDirectory, "gpcl6win64.exe");
         if (!File.Exists(_GhostPCLFileName))
             throw new Exception("Ghost PCL FileName doesn't Exist!");
@@ -112,26 +113,58 @@ public class FileRead : Shared.FileRead, IFileRead
         return results;
     }
 
-#pragma warning disable IDE0060
+#nullable enable
-    private void PostOpenInsightMetrologyViewerAttachments(string reportFullPath, DateTime dateTime, List<txt.Description> descriptions)
+
-#pragma warning restore IDE0060
+    private string? GetHeaderIdDirectory(DateTime[] dateTimes, long headerId)
     {
-        string jobIdDirectory = Path.Combine(_JobIdParentDirectory, _Logistics.JobID);
+        string? result = null;
+        int weekNum;
+        string year;
+        string weekDirectory;
+        string checkDirectory;
+        foreach (DateTime dateTime in dateTimes)
+        {
+            year = dateTime.Year.ToString();
+            weekNum = _Calendar.GetWeekOfYear(dateTime, CalendarWeekRule.FirstDay, DayOfWeek.Sunday);
+            weekDirectory = Path.Combine(_OpenInsightMetrologyViewerFileShare, dateTime.Year.ToString(), $"WW{weekNum:00}");
+            if (!Directory.Exists(weekDirectory))
+                _ = Directory.CreateDirectory(weekDirectory);
+            checkDirectory = Path.Combine(weekDirectory, $"-{headerId}");
+            if (!Directory.Exists(checkDirectory))
+                continue;
+            result = checkDirectory;
+            break;
+        }
+        return result;
+    }
+
+    private void PostOpenInsightMetrologyViewerAttachments(DateTime dateTime, List<txt.Description> descriptions)
+    {
+        string? json;
+        string? subGroupId;
+        string jobIdDirectory = Path.Combine(Path.GetDirectoryName(_FileConnectorConfiguration.AlternateTargetFolder) ?? throw new Exception(), _Logistics.JobID);
         if (!Directory.Exists(jobIdDirectory))
             _ = Directory.CreateDirectory(jobIdDirectory);
-        string json;
         string[] matchDirectories = GetInProcessDirectory(jobIdDirectory);
-        if (!_StaticRuns.TryGetValue(_Logistics.Sequence, out List<string> collection))
+        if (!_StaticRuns.TryGetValue(_Logistics.Sequence, out List<string>? values))
-            json = string.Empty;
+            (json, subGroupId) = (null, null);
         else
         {
-            if (collection.Count != 1)
+            if (values.Count != 1)
-                throw new Exception($"{nameof(_StaticRuns)} has too many values for {_Logistics.Sequence}!");
+                throw new Exception($"{nameof(_StaticRuns)} {values.Count} != 1 {_Logistics.Sequence}!");
-            json = collection[0];
+            string[] segments = values[0].Split(new string[] { "|" }, StringSplitOptions.None);
+            json = segments[0];
+            subGroupId = segments.Length > 1 ? segments[1] : null;
             lock (_StaticRuns)
                 _ = _StaticRuns.Remove(_Logistics.Sequence);
         }
-        OpenInsightMetrologyViewer.WSRequest.PostOpenInsightMetrologyViewerAttachments(this, _Logistics, _OpenInsightMetrologyViewerAPI, _GhostPCLFileName, dateTime, json, descriptions, matchDirectories[0]);
+        DateTime[] dateTimes = new DateTime[] { dateTime, dateTime.AddDays(-6.66) };
+        int weekOfYear = _Calendar.GetWeekOfYear(dateTime, CalendarWeekRule.FirstDay, DayOfWeek.Sunday);
+        long headerId = OpenInsightMetrologyViewer.WSRequest.GetHeaderId(this, _Logistics, _OpenInsightMetrologyViewerAPI, dateTime, weekOfYear, json, descriptions);
+        string? headerIdDirectory = GetHeaderIdDirectory(dateTimes, headerId);
+        if (string.IsNullOrEmpty(headerIdDirectory))
+            throw new Exception($"Didn't find header id directory <{headerId}>");
+        OpenInsightMetrologyViewer.WSRequest.PostOpenInsightMetrologyViewerAttachments(this, _Logistics, _OpenInsightMetrologyViewerAPI, _GhostPCLFileName, descriptions, matchDirectories[0], subGroupId, headerId, headerIdDirectory);
     }
 
     private Tuple<string, Test[], JsonElement[], List<FileInfo>> GetExtractResult(string reportFullPath, DateTime dateTime)
@@ -144,7 +177,7 @@ public class FileRead : Shared.FileRead, IFileRead
         List<txt.Description> descriptions = txt.ProcessData.GetDescriptions(jsonElements);
         Test[] tests = (from l in descriptions select (Test)l.Test).ToArray();
         if (_IsEAFHosted && _FileConnectorConfiguration.FileScanningIntervalInSeconds > 0)
-            PostOpenInsightMetrologyViewerAttachments(reportFullPath, dateTime, descriptions);
+            PostOpenInsightMetrologyViewerAttachments(dateTime, descriptions);
         results = new Tuple<string, Test[], JsonElement[], List<FileInfo>>(pdsf.Item1, tests, jsonElements, new List<FileInfo>());
         return results;
     }

Adaptation/FileHandlers/TIBCO/FileRead.cs

@@ -11,7 +11,7 @@ using System.Text.Json;
 namespace Adaptation.FileHandlers.TIBCO;
 
 public class FileRead : Shared.FileRead, IFileRead
-{
+{ // cSpell:disable
 
 #nullable enable
 
@@ -23,7 +23,7 @@ public class FileRead : Shared.FileRead, IFileRead
 
     public FileRead(ISMTP smtp, Dictionary<string, string> fileParameter, string cellInstanceName, int? connectionCount, string cellInstanceConnectionName, FileConnectorConfiguration fileConnectorConfiguration, string equipmentTypeName, string parameterizedModelObjectDefinitionType, IList<ModelObjectParameterDefinition> modelObjectParameters, string equipmentDictionaryName, Dictionary<string, List<long>> dummyRuns, Dictionary<long, List<string>> staticRuns, bool useCyclicalForDescription, bool isEAFHosted) :
         base(new Description(), false, smtp, fileParameter, cellInstanceName, connectionCount, cellInstanceConnectionName, fileConnectorConfiguration, equipmentTypeName, parameterizedModelObjectDefinitionType, modelObjectParameters, equipmentDictionaryName, dummyRuns, staticRuns, useCyclicalForDescription, isEAFHosted: connectionCount is null)
-    {
+    { // cSpell:restore
         _MinFileLength = 10;
         _NullData = string.Empty;
         _Logistics = new(this);

Adaptation/FileHandlers/TIBCO/Transport/Common.cs

@@ -0,0 +1,21 @@
+namespace Adaptation.FileHandlers.TIBCO.Transport;
+
+public class Common
+{
+
+    public string Layer { get; }
+    public string PSN { get; }
+    public int? RDSNumber { get; }
+    public int? ReactorNumber { get; }
+    public string Zone { get; }
+
+    public Common(string layer, string psn, int? rdsNumber, int? reactor, string zone)
+    {
+        Layer = layer;
+        PSN = psn;
+        RDSNumber = rdsNumber;
+        ReactorNumber = reactor;
+        Zone = zone;
+    }
+
+}

Adaptation/FileHandlers/TIBCO/Transport/CommonB.cs

@@ -0,0 +1,23 @@
+namespace Adaptation.FileHandlers.TIBCO.Transport;
+
+public class CommonB
+{
+
+    public string Comment { get; }
+    public string Layer { get; }
+    public int? RDSNumber { get; }
+    public string PSN { get; }
+    public int? ReactorNumber { get; }
+    public string Zone { get; }
+
+    public CommonB(string comment, string layer, int? rdsNumber, string psn, int? reactorNumber, string zone)
+    {
+        Comment = comment;
+        Layer = layer;
+        RDSNumber = rdsNumber;
+        PSN = psn;
+        ReactorNumber = reactorNumber;
+        Zone = zone;
+    }
+
+}

Adaptation/FileHandlers/TIBCO/Transport/Job.cs

@@ -11,11 +11,9 @@ using System.Text.RegularExpressions;
 
 namespace Adaptation.FileHandlers.TIBCO.Transport;
 
-public class Job
+public partial class Job
 {
 
-#nullable restore
-
     public string AutomationMode { get; }
     public string BasicType { get; }
     public string CreationUser { get; }
@@ -39,26 +37,6 @@ public class Job
     public DateTime DateTime { get; }
     public List<Item> Items { get; }
 
-    private class Common
-    {
-
-        public string Layer { get; }
-        public string PSN { get; }
-        public int? RDSNumber { get; }
-        public int? Reactor { get; }
-        public string Zone { get; }
-
-        public Common(string layer, string psn, int? rdsNumber, int? reactor, string zone)
-        {
-            Layer = layer;
-            PSN = psn;
-            RDSNumber = rdsNumber;
-            Reactor = reactor;
-            Zone = zone;
-        }
-
-    }
-
     public Job(string lsl2SQLConnectionString, string metrologyFileShare, string barcodeHostFileShare, string mid)
     {
         const int zero = 0;
@@ -67,42 +45,39 @@ public class Job
             IsAreaSi = false;
         else
         {
-            string psn;
-            string zone;
-            string layer;
             Common common;
-            int? rdsNumber;
+            CommonB commonB;
-            string comment;
-            int? slotNumber;
-            bool isWorkOrder;
             int? reactorNumber;
-            int? workOrderNumber;
+            WorkOrder workOrder;
-            int? workOrderCassette;
             const string hyphen = "-";
+            const string bioRad2 = "BIORAD2";
+            const string bioRad3 = "BIORAD3";
+            const string twoAlphaPattern = "^[a-zA-z]{2,3}";
+            const string reactorNumberPattern = @"^[0-9]{2}--";
             Input input = JsonSerializer.Deserialize<Input>(mid);
             if (!long.TryParse(input.Sequence, out long sequence))
                 DateTime = DateTime.Now;
             else
                 DateTime = new DateTime(sequence);
-            if (!string.IsNullOrEmpty(input.MID) && !string.IsNullOrEmpty(input.MesEntity) && Regex.IsMatch(input.MID, @"^[0-9]{2}--") && input.MesEntity is "BIORAD2" or "BIORAD3")
+            if (!string.IsNullOrEmpty(input.MID) && !string.IsNullOrEmpty(input.MesEntity) && Regex.IsMatch(input.MID, reactorNumberPattern) && input.MesEntity is bioRad2 or bioRad3)
-                (common, workOrderNumber, _, workOrderCassette, slotNumber, isWorkOrder) = Get(input, barcodeHostFileShare);
+                (common, workOrder) = Get(input, barcodeHostFileShare);
             else
             {
+                workOrder = GetWorkOrder(input);
                 reactorNumber = GetReactorNumber(input);
-                (workOrderNumber, _, workOrderCassette, slotNumber, isWorkOrder) = GetWorkOrder(input);
+                if (workOrder.IsWorkOrder || reactorNumber.HasValue)
-                if (isWorkOrder || reactorNumber.HasValue)
                     common = new(string.Empty, string.Empty, null, null, string.Empty);
-                else if (!string.IsNullOrEmpty(input.MID) && input.MID.Length is 2 or 3 && Regex.IsMatch(input.MID, "^[a-zA-z]{2,3}"))
+                else if (!string.IsNullOrEmpty(input.MID) && input.MID.Length is 2 or 3 && Regex.IsMatch(input.MID, twoAlphaPattern))
                     common = Get(metrologyFileShare, input);
                 else
                     common = Get(input);
             }
             if (IsValid(common.RDSNumber))
-                (comment, layer, rdsNumber, psn, reactorNumber, zone) = GetWithValidRDS(lsl2SQLConnectionString, common.Layer, common.PSN, common.RDSNumber, common.Reactor, common.Zone);
+                commonB = GetWithValidRDS(lsl2SQLConnectionString, common.Layer, common.PSN, common.RDSNumber, common.ReactorNumber, common.Zone);
-            else if (isWorkOrder || common.RDSNumber.HasValue)
+            else if (workOrder.IsWorkOrder || common.RDSNumber.HasValue)
-                (comment, layer, rdsNumber, psn, reactorNumber, zone) = Get(lsl2SQLConnectionString, common.Layer, common.PSN, common.Reactor, slotNumber, workOrderNumber, workOrderCassette, common.Zone);
+                commonB = Get(lsl2SQLConnectionString, common.Layer, common.PSN, common.ReactorNumber, workOrder.SlotNumber, workOrder.WorkOrderNumber, workOrder.WorkOrderCassette, common.Zone);
             else
-                (comment, layer, rdsNumber, psn, reactorNumber, zone) = (hyphen, hyphen, common.RDSNumber, common.PSN, common.Reactor, hyphen);
+                commonB = new(hyphen, hyphen, common.RDSNumber, common.PSN, common.ReactorNumber, hyphen);
             Qty = "1";
             Status = hyphen; // INFO
             CreationUser = hyphen; // ?
@@ -115,13 +90,13 @@ public class Job
             IsAreaSi = input.Area == "Si"; // N/A
             StateModel = input.EquipmentType; // ?
             JobName = DateTime.Ticks.ToString(); // ?
-            SpecName = !string.IsNullOrEmpty(layer) ? layer : hyphen; // LAYER
-            ProductName = !string.IsNullOrEmpty(psn) ? psn : hyphen; // PRODUCT
             AutomationMode = string.Concat(DateTime.Ticks, ".", input.MesEntity); // ?
-            ProcessSpecName = !string.IsNullOrEmpty(zone) ? zone : hyphen; // WAFER_POS
+            SpecName = !string.IsNullOrEmpty(commonB.Layer) ? commonB.Layer : hyphen; // LAYER
-            BasicType = !string.IsNullOrEmpty(comment) ? comment : hyphen; // BASIC_TYPE
+            ProductName = !string.IsNullOrEmpty(commonB.PSN) ? commonB.PSN : hyphen; // PRODUCT
-            LotName = rdsNumber is not null ? rdsNumber.Value.ToString() : hyphen; // MID
+            ProcessSpecName = !string.IsNullOrEmpty(commonB.Zone) ? commonB.Zone : hyphen; // WAFER_POS
-            ProcessType = reactorNumber is not null ? reactorNumber.Value.ToString() : hyphen; // PROCESS_JOBID
+            BasicType = !string.IsNullOrEmpty(commonB.Comment) ? commonB.Comment : hyphen; // BASIC_TYPE
+            LotName = commonB.RDSNumber is not null ? commonB.RDSNumber.Value.ToString() : hyphen; // MID
+            ProcessType = commonB.ReactorNumber is not null ? commonB.ReactorNumber.Value.ToString() : hyphen; // PROCESS_JOBID
             Items.Add(new Item { Name = "0", Type = "NA", Number = (0 + 1).ToString(), Qty = "1", CarrierName = hyphen });
         }
     }
@@ -139,7 +114,7 @@ public class Job
         return result;
     }
 
-    private static (int?, int?, int?, int?, bool) GetWorkOrder(Input input)
+    private static WorkOrder GetWorkOrder(Input input)
     {
         int? slotNumber;
         int? workOrderStep = null;
@@ -373,17 +348,13 @@ public class Job
         return result;
     }
 
-    private static (Common common, int?, int?, int?, int?, bool) Get(Input input, string barcodeHostFileShare)
+    private static (Common common, WorkOrder workOrder) Get(Input input, string barcodeHostFileShare)
     {
         if (string.IsNullOrEmpty(barcodeHostFileShare) || !Directory.Exists(barcodeHostFileShare))
             throw new Exception($"Unable to access file-share <{barcodeHostFileShare}>");
         int? rds;
-        int? slotNumber;
-        bool isWorkOrder;
         long sequence = 0;
-        int? workOrderStep;
+        WorkOrder workOrder;
-        int? workOrderNumber;
-        int? workOrderCassette;
         string psn = string.Empty;
         string zone = string.Empty;
         string layer = string.Empty;
@@ -398,28 +369,27 @@ public class Job
         if (text is null || text.Length < 3)
         {
             rds = null;
-            (workOrderNumber, workOrderStep, workOrderCassette, slotNumber, isWorkOrder) = (null, null, null, null, false);
+            workOrder = new(null, null, null, null, false);
         }
         else if (!text.Contains('.'))
         {
             rds = !int.TryParse(text.Substring(2), out int rdsNumber) ? null : rdsNumber;
-            (workOrderNumber, workOrderStep, workOrderCassette, slotNumber, isWorkOrder) = (null, null, null, null, false);
+            workOrder = new(null, null, null, null, false);
         }
         else
         {
             rds = null;
-            (workOrderNumber, workOrderStep, workOrderCassette, slotNumber, isWorkOrder) = GetWorkOrder(new(input, text.Substring(2)));
+            workOrder = GetWorkOrder(new(input, text.Substring(2)));
         }
         Common common = new(layer, psn, rds, reactor, zone);
-        return new(common, workOrderNumber, workOrderStep, workOrderCassette, slotNumber, isWorkOrder);
+        return new(common, workOrder);
     }
 
 #nullable disable
 
-    private static string GetRunJson(string lsl2SQLConnectionString, int? rds, int? workOrderNumber, int? workOrderCassette, int? slot, int? reactor)
+    private static string GetRunJson(string lsl2SQLConnectionString, string commandText)
     {
         StringBuilder result = new();
-        string commandText = GetCommandText(rds, workOrderNumber, workOrderCassette, slot, reactor);
         try
         {
             using SqlConnection sqlConnection = new(lsl2SQLConnectionString);
@@ -507,20 +477,21 @@ public class Job
                 Append("   select max(qa.rds_no) ").
                 Append("   from lsl2sql.dbo.react_run qa ").
                 Append("   where qa.load_sig != '' ").
-                Append("       and qa.load_sig_dtm > '2022-07-01 00:00:00.000' ").
+                Append("       and qa.load_sig_dtm > '2023-05-01 00:00:00.000' ").
                 Append("       and qa.reactor = ").Append(reactor is null ? -1 : reactor.Value).Append(' ').
                 Append(" ) ").
                 Append(" for json path ");
         return result.ToString();
     } // cSpell:restore
 
-    private static (string, string, int?, string, int?, string) Get(string lsl2SQLConnectionString, string layer, string psn, int? reactorNumber, int? slotNumber, int? workOrderNumber, int? workOrderCassette, string zone)
+    private static CommonB Get(string lsl2SQLConnectionString, string layer, string psn, int? reactorNumber, int? slotNumber, int? workOrderNumber, int? workOrderCassette, string zone)
     {
         int? rdsNumber;
         string comment;
         const int zero = 0;
         const string hyphen = "-";
-        string json = GetRunJson(lsl2SQLConnectionString, rds: null, workOrderNumber, workOrderCassette, slotNumber, reactorNumber);
+        string commandText = GetCommandText(rds: null, workOrderNumber, workOrderCassette, slotNumber, reactorNumber);
+        string json = GetRunJson(lsl2SQLConnectionString, commandText);
         if (string.IsNullOrEmpty(json))
         {
             rdsNumber = null;
@@ -565,12 +536,13 @@ public class Job
         return new(comment, layer, rdsNumber, psn, reactorNumber, zone);
     }
 
-    private static (string, string, int?, string, int?, string) GetWithValidRDS(string lsl2SQLConnectionString, string layer, string psn, int? rdsNumber, int? reactorNumber, string zone)
+    private static CommonB GetWithValidRDS(string lsl2SQLConnectionString, string layer, string psn, int? rdsNumber, int? reactorNumber, string zone)
     {
         string comment;
         const int zero = 0;
         const string hyphen = "-";
-        string json = GetRunJson(lsl2SQLConnectionString, rdsNumber, workOrderNumber: null, workOrderCassette: null, slot: null, reactor: null);
+        string commandText = GetCommandText(rdsNumber, workOrderNumber: null, workOrderCassette: null, slot: null, reactor: null);
+        string json = GetRunJson(lsl2SQLConnectionString, commandText);
         if (string.IsNullOrEmpty(json))
         {
             comment = hyphen;

Adaptation/FileHandlers/TIBCO/Transport/WorkOrder.cs

@@ -0,0 +1,21 @@
+namespace Adaptation.FileHandlers.TIBCO.Transport;
+
+public class WorkOrder
+{
+
+    public int? WorkOrderNumber { get; }
+    public int? WorkOrderStep { get; }
+    public int? WorkOrderCassette { get; }
+    public int? SlotNumber { get; }
+    public bool IsWorkOrder { get; }
+
+    public WorkOrder(int? workOrderNumber, int? workOrderStep, int? workOrderCassette, int? slotNumber, bool isWorkOrder)
+    {
+        WorkOrderNumber = workOrderNumber;
+        WorkOrderStep = workOrderStep;
+        WorkOrderCassette = workOrderCassette;
+        SlotNumber = slotNumber;
+        IsWorkOrder = isWorkOrder;
+    }
+
+}

Adaptation/MET08DDUPSP1TBI.Tests.csproj

@@ -32,7 +32,10 @@
         <DefineConstants>Linux</DefineConstants>
     </PropertyGroup>
     <ItemGroup>
-        <PackageReference Include="coverlet.collector" Version="6.0.0" />
+        <RuntimeHostConfigurationOption Include="AssemblyName" Value="MET08DDUPSP1TBI" />
+    </ItemGroup>
+    <ItemGroup>
+        <PackageReference Include="coverlet.collector" Version="6.0.2" />
         <PackageReference Include="FFMpegCore" Version="5.1.0" />
         <PackageReference Include="IKVM.AWT.WinForms" Version="7.2.4630.5"><NoWarn>NU1701</NoWarn></PackageReference>
         <PackageReference Include="IKVM.OpenJDK.Core" Version="7.2.4630.5"><NoWarn>NU1701</NoWarn></PackageReference>
@@ -42,7 +45,7 @@
         <PackageReference Include="IKVM.OpenJDK.XML.API" Version="7.2.4630.5"><NoWarn>NU1701</NoWarn></PackageReference>
         <PackageReference Include="IKVM.Runtime" Version="7.2.4630.5"><NoWarn>NU1701</NoWarn></PackageReference>
         <PackageReference Include="Instances" Version="3.0.0" />
-        <PackageReference Include="Microsoft.Extensions.Configuration.Binder" Version="8.0.0" />
+        <PackageReference Include="Microsoft.Extensions.Configuration.Binder" Version="8.0.1" />
         <PackageReference Include="Microsoft.Extensions.Configuration.CommandLine" Version="8.0.0" />
         <PackageReference Include="Microsoft.Extensions.Configuration.EnvironmentVariables" Version="8.0.0" />
         <PackageReference Include="Microsoft.Extensions.Configuration.FileExtensions" Version="8.0.0" />
@@ -52,17 +55,17 @@
         <PackageReference Include="Microsoft.Extensions.Logging.Console" Version="8.0.0" />
         <PackageReference Include="Microsoft.Extensions.Logging.Debug" Version="8.0.0" />
         <PackageReference Include="Microsoft.Extensions.Logging" Version="8.0.0" />
-        <PackageReference Include="Microsoft.NET.Test.Sdk" Version="17.8.0" />
+        <PackageReference Include="Microsoft.NET.Test.Sdk" Version="17.9.0" />
         <PackageReference Include="Microsoft.Win32.SystemEvents" Version="8.0.0" />
-        <PackageReference Include="MSTest.TestAdapter" Version="3.1.1" />
+        <PackageReference Include="MSTest.TestAdapter" Version="3.3.1" />
-        <PackageReference Include="MSTest.TestFramework" Version="3.1.1" />
+        <PackageReference Include="MSTest.TestFramework" Version="3.3.1" />
         <PackageReference Include="Pdfbox" Version="1.1.1"><NoWarn>NU1701</NoWarn></PackageReference>
-        <PackageReference Include="RoboSharp" Version="1.3.5" />
+        <PackageReference Include="RoboSharp" Version="1.5.1" />
         <PackageReference Include="System.Configuration.ConfigurationManager" Version="8.0.0" />
         <PackageReference Include="System.Data.OleDb" Version="8.0.0" />
-        <PackageReference Include="System.Data.SqlClient" Version="4.8.5" />
+        <PackageReference Include="System.Data.SqlClient" Version="4.8.6" />
-        <PackageReference Include="System.Drawing.Common" Version="8.0.0" />
+        <PackageReference Include="System.Drawing.Common" Version="8.0.5" />
-        <PackageReference Include="System.Text.Json" Version="8.0.0" />
+        <PackageReference Include="System.Text.Json" Version="8.0.3" />
         <PackageReference Include="Tesseract" Version="5.2.0" />
     </ItemGroup>
     <ItemGroup>

Adaptation/Shared/FileRead.cs

@@ -571,16 +571,99 @@ public class FileRead : Properties.IFileRead
         }
     }
 
+    internal static List<string> GetDirectoryNames(string directory)
+    {
+#nullable enable
+        List<string> results = new();
+        string? fileName;
+        string? checkDirectory = directory;
+        string? pathRoot = Path.GetPathRoot(directory);
+        string extension = Path.GetExtension(directory);
+        if (string.IsNullOrEmpty(pathRoot))
+            throw new NullReferenceException(nameof(pathRoot));
+        if (Directory.Exists(directory))
+        {
+            fileName = Path.GetFileName(directory);
+            if (!string.IsNullOrEmpty(fileName))
+                results.Add(fileName);
+        }
+        else if ((string.IsNullOrEmpty(extension) || extension.Length > 3) && !File.Exists(directory))
+        {
+            fileName = Path.GetFileName(directory);
+            if (!string.IsNullOrEmpty(fileName))
+                results.Add(fileName);
+        }
+        for (int i = 0; i < int.MaxValue; i++)
+        {
+            checkDirectory = Path.GetDirectoryName(checkDirectory);
+            if (string.IsNullOrEmpty(checkDirectory) || checkDirectory == pathRoot)
+                break;
+            fileName = Path.GetFileName(checkDirectory);
+            if (string.IsNullOrEmpty(fileName))
+                continue;
+            results.Add(fileName);
+        }
+        results.Add(pathRoot);
+        results.Reverse();
+        return results;
+#nullable disable
+    }
+
+    private string GetJobIdDirectory(string path)
+    {
+        string result;
+        List<string> directoryNames = GetDirectoryNames(path);
+        if (!directoryNames.Contains(_Logistics.JobID))
+            result = Path.GetDirectoryName(path);
+        else
+        {
+            result = string.Empty;
+            foreach (string directoryName in directoryNames)
+            {
+                result = Path.Combine(result, directoryName);
+                if (directoryName == _Logistics.JobID)
+                    break;
+            }
+        }
+        return result;
+    }
+
+    private static void DeleteEmptyTopDirectories(string rootDirectory)
+    {
+        if (Directory.Exists(rootDirectory))
+        {
+            string[] files;
+            string[] directories;
+            string[] subDirectories = Directory.GetDirectories(rootDirectory, "*", SearchOption.TopDirectoryOnly);
+            foreach (string subDirectory in subDirectories)
+            {
+                files = Directory.GetFiles(subDirectory, "*", SearchOption.AllDirectories);
+                if (files.Length > 0)
+                    continue;
+                directories = Directory.GetDirectories(subDirectory, "*", SearchOption.TopDirectoryOnly);
+                if (directories.Length > 0)
+                    continue;
+                try
+                { Directory.Delete(subDirectory); }
+                catch (UnauthorizedAccessException)
+                {
+                    new DirectoryInfo(subDirectory).Attributes = FileAttributes.Normal;
+                    Directory.Delete(subDirectory);
+                }
+            }
+        }
+    }
+
     private void Shared1811(string to, FileInfo sourceFile)
     {
         if (!_IsDuplicator && _FileConnectorConfiguration.SourceFileFilter != "*" && sourceFile.Exists && sourceFile.Length < _MinFileLength)
         {
             string directoryName = Path.GetFileName(to);
-            string jobIdDirectory = Path.GetDirectoryName(to);
+            string jobIdDirectory = GetJobIdDirectory(to);
             DateTime dateTime = DateTime.Now.AddMinutes(-15);
             string weekOfYear = _Calendar.GetWeekOfYear(_Logistics.DateTimeFromSequence, CalendarWeekRule.FirstDay, DayOfWeek.Sunday).ToString("00");
             string weekDirectory = $"{_Logistics.DateTimeFromSequence:yyyy}_Week_{weekOfYear}{@"\"}{_Logistics.DateTimeFromSequence:yyyy-MM-dd}";
-            string destinationDirectory = string.Concat(jobIdDirectory, @"\_ Ignore 100 bytes\", weekDirectory, @"\", directoryName);
+            string destinationDirectory = Path.Combine(jobIdDirectory, "_ Ignore 100 bytes", weekDirectory, directoryName);
             if (!Directory.Exists(destinationDirectory))
                 _ = Directory.CreateDirectory(destinationDirectory);
             File.Move(sourceFile.FullName, string.Concat(destinationDirectory, @"\", sourceFile.Name));
@@ -605,6 +688,7 @@ public class FileRead : Properties.IFileRead
                 }
             }
             catch (Exception) { throw; }
+            DeleteEmptyTopDirectories(jobIdDirectory);
         }
     }
 

Adaptation/Shared/Metrology/WS.Attachment.cs

@@ -2,18 +2,27 @@
 
 public partial class WS
 {
+
     public class Attachment
     {
 
+        public string SubGroupId { get; set; }
+        public long HeaderId { get; set; }
+        public string HeaderIdDirectory { get; set; }
         public string UniqueId { get; set; }
         public string DestinationFileName { get; set; }
         public string SourceFileName { get; set; }
+        public string AttachmentId { get; set; }
 
-        public Attachment(string uniqueId, string destinationFileName, string sourceFileName)
+        public Attachment(string subGroupId, long headerId, string headerIdDirectory, string uniqueId, string destinationFileName, string sourceFileName)
         {
+            SubGroupId = subGroupId;
+            HeaderId = headerId;
+            HeaderIdDirectory = headerIdDirectory;
             UniqueId = uniqueId;
             DestinationFileName = destinationFileName;
             SourceFileName = sourceFileName;
+            AttachmentId = System.Guid.NewGuid().ToString();
         }
 
     }

Adaptation/Shared/Metrology/WS.cs

@@ -10,7 +10,7 @@ namespace Adaptation.Shared.Metrology;
 public partial class WS
 {
 
-    public static (string, Results) SendData(string url, object payload, int timeoutSeconds = 120)
+    public static (string, Results) SendData(string url, long sequence, string directory, object payload, int timeoutSeconds = 120)
     {
         Results results = new();
         string resultsJson = string.Empty;
@@ -31,6 +31,10 @@ public partial class WS
                 HttpResponseMessage httpResponseMessage = httpClient.SendAsync(httpRequestMessage, HttpCompletionOption.ResponseContentRead).Result;
                 resultsJson = httpResponseMessage.Content.ReadAsStringAsync().Result;
                 results = JsonSerializer.Deserialize<Results>(resultsJson, new JsonSerializerOptions { PropertyNameCaseInsensitive = true });
+                string checkDirectory = Path.Combine(directory, $"-{results.HeaderID}");
+                if (!Directory.Exists(checkDirectory))
+                    _ = Directory.CreateDirectory(checkDirectory);
+                File.WriteAllText(Path.Combine(checkDirectory, $"{sequence}.json"), json);
             }
             if (!results.Success)
                 results.Errors.Add(results.ToString());
@@ -51,58 +55,42 @@ public partial class WS
         return new(resultsJson, results);
     }
 
-    // this method is a wrapper for attaching a file to either a header or data record
+    public static void AttachFile(string url, Attachment attachment, int timeoutSeconds = 60)
-    //   URL is the same URL used for SendData, ex: http://localhost/api/inbound/CDE
-    //   attachToHeaderId is the ID returned by SendData 
-    //   attachToDataUniqueId is the string unique ID for the data record, aka the Title of the Sharepoint list entry
-    //   fileContents is a byte array with the contents of the file
-    //   fileName is which attachment this is, image.pdf, data.pdf, data.txt, header.pdf, etc
-    //   timeoutSeconds is configured as the request timeout
-    // this method will either succeed or throw an exception
-    // also, this has been made synchronous
-    public static void AttachFile(string url, long attachToHeaderId, string attachToDataUniqueId, byte[] fileContents, string fileName, int timeoutSeconds = 60)
     {
         using HttpClient httpClient = new();
-        string requestUrl = url + "/attachment?headerid=" + attachToHeaderId.ToString();
+        string json = JsonSerializer.Serialize(attachment);
-        if (!string.IsNullOrWhiteSpace(attachToDataUniqueId))
-        {
-            requestUrl += "&datauniqueid=";
-            requestUrl += System.Net.WebUtility.UrlEncode(attachToDataUniqueId);
-        }
-        requestUrl += "&filename="; // this is just so the web server log shows the filename
-        requestUrl += System.Net.WebUtility.UrlEncode(fileName);
-
         httpClient.Timeout = new TimeSpan(0, 0, 0, timeoutSeconds, 0);
-
+        StringContent httpContent = new(json, Encoding.UTF8, "application/json");
-        MultipartFormDataContent multipartFormDataContent = new();
+        HttpResponseMessage httpResponseMessage = httpClient.PostAsync($"{url}/attachment", httpContent).Result;
-        ByteArrayContent byteArrayContent = new(fileContents);
+        if (!httpResponseMessage.IsSuccessStatusCode)
-        byteArrayContent.Headers.ContentType = new System.Net.Http.Headers.MediaTypeHeaderValue("application/octet-stream");
+        {
-
+            string resultBody = httpResponseMessage.Content.ReadAsStringAsync().Result;
-        multipartFormDataContent.Add(byteArrayContent, "attachment", fileName);
+            throw new Exception($"Attachment failed: {resultBody}");
-
+        }
-        HttpResponseMessage httpResponseMessage = httpClient.PostAsync(requestUrl, multipartFormDataContent).Result;
-
-        if (httpResponseMessage.IsSuccessStatusCode)
-            return;
-
-        string resultBody = httpResponseMessage.Content.ReadAsStringAsync().Result;
-
-        throw new Exception("Attachment failed: " + resultBody);
     }
 
-    public static void AttachFiles(string url, long headerID, List<Attachment> headerAttachments = null, List<Attachment> dataAttachments = null)
+    public static void AttachFiles(string url, List<Attachment> headerAttachments = null, List<Attachment> dataAttachments = null)
     {
+        string directory;
         try
         {
             if (headerAttachments is not null)
             {
                 foreach (Attachment attachment in headerAttachments)
-                    AttachFile(url, headerID, "", File.ReadAllBytes(attachment.SourceFileName), attachment.DestinationFileName);
+                {
+                    directory = Path.GetDirectoryName(attachment.HeaderIdDirectory) ?? throw new Exception();
+                    File.Copy(attachment.SourceFileName, Path.Combine(directory, attachment.AttachmentId, attachment.DestinationFileName), overwrite: true);
+                    AttachFile(url, attachment);
+                }
             }
             if (dataAttachments is not null)
             {
                 foreach (Attachment attachment in dataAttachments)
-                    AttachFile(url, headerID, attachment.UniqueId, File.ReadAllBytes(attachment.SourceFileName), attachment.DestinationFileName);
+                {
+                    directory = Path.GetDirectoryName(attachment.HeaderIdDirectory) ?? throw new Exception();
+                    File.Copy(attachment.SourceFileName, Path.Combine(directory, attachment.AttachmentId, attachment.DestinationFileName), overwrite: true);
+                    AttachFile(url, attachment);
+                }
             }
             //MessageBox.Show(r.ToString());
         }

Adaptation/Shared/Test.cs

@@ -14,6 +14,7 @@ public enum Test
     CandelaPSL = 38,
     CandelaVerify = 37,
     CDE = 24,
+    Climatec = 54, //Largest
     CV = 3,
     DailyRPMAverage = 19,
     DailyRPMPLRatio = 20,
@@ -38,7 +39,7 @@ public enum Test
     RPMPLRatio = 17,
     RPMXY = 15,
     SP1 = 8,
-    SRP2100 = 53, //Largest
+    SRP2100 = 53,
     Tencor = 7,
     UV = 35,
     VerificationLehighton = 14,

Adaptation/_Tests/CreateSelfDescription/Staging/v2.39.0/MET08DDUPSP1TBI.cs

@@ -1,3 +1,4 @@
+#if v2_39_0
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -45,7 +46,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting?.Dispose();
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -58,7 +59,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -71,7 +72,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -84,7 +85,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -97,7 +98,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -110,7 +111,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -123,7 +124,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -136,7 +137,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -149,7 +150,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -162,7 +163,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -176,3 +177,4 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.39.0/SP101-EQPT.cs

@@ -1,3 +1,4 @@
+#if v2_39_0
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -44,7 +45,7 @@ public class SP101_EQPT : EAFLoggingUnitTesting
         EAFLoggingUnitTesting?.Dispose();
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -58,3 +59,4 @@ public class SP101_EQPT : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.39.0/SP101.cs

@@ -1,3 +1,4 @@
+#if v2_39_0
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -45,7 +46,7 @@ public class SP101 : EAFLoggingUnitTesting
         EAFLoggingUnitTesting?.Dispose();
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -59,3 +60,4 @@ public class SP101 : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.43.0/MET08DDUPSP1TBI.cs

@@ -1,3 +1,4 @@
+#if v2_43_0
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -45,7 +46,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting?.Dispose();
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -58,7 +59,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -71,7 +72,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -84,7 +85,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -97,7 +98,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -110,7 +111,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -123,7 +124,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -136,7 +137,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -149,7 +150,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -162,7 +163,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -176,3 +177,4 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.43.0/SP101-EQPT.cs

@@ -1,3 +1,4 @@
+#if v2_43_0
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -44,7 +45,7 @@ public class SP101_EQPT : EAFLoggingUnitTesting
         EAFLoggingUnitTesting?.Dispose();
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -58,3 +59,4 @@ public class SP101_EQPT : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.43.0/SP101.cs

@@ -1,3 +1,4 @@
+#if v2_43_0
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -45,7 +46,7 @@ public class SP101 : EAFLoggingUnitTesting
         EAFLoggingUnitTesting?.Dispose();
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -59,3 +60,4 @@ public class SP101 : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.43.3/MET08DDUPSP1TBI.cs

@@ -1,3 +1,4 @@
+#if v2_43_3
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -45,7 +46,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting?.Dispose();
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -58,7 +59,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -71,7 +72,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -84,7 +85,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -97,7 +98,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -110,7 +111,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -123,7 +124,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -136,7 +137,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -149,7 +150,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -162,7 +163,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -175,7 +176,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -189,3 +190,4 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.43.4/MET08DDUPSP1TBI.cs

@@ -1,3 +1,4 @@
+#if v2_43_4
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -47,7 +48,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting?.Dispose();
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -60,7 +61,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -73,7 +74,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -86,7 +87,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -99,7 +100,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -112,7 +113,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -125,7 +126,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -138,7 +139,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -151,7 +152,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -164,7 +165,7 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -178,3 +179,4 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.43.4/SP101-EQPT.cs

@@ -1,3 +1,4 @@
+#if v2_43_4
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -46,7 +47,7 @@ public class SP101_EQPT : EAFLoggingUnitTesting
         EAFLoggingUnitTesting?.Dispose();
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -60,3 +61,4 @@ public class SP101_EQPT : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.43.4/SP101.cs

@@ -1,3 +1,4 @@
+#if v2_43_4
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -47,7 +48,7 @@ public class SP101 : EAFLoggingUnitTesting
         EAFLoggingUnitTesting?.Dispose();
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -61,3 +62,4 @@ public class SP101 : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.47.0/SP101-EQPT.cs

@@ -1,3 +1,4 @@
+#if v2_47_0
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -46,7 +47,9 @@ public class SP101_EQPT : EAFLoggingUnitTesting
         EAFLoggingUnitTesting?.Dispose();
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_47_0__SP101_EQPT__MoveAllFiles()
     {
@@ -58,3 +61,4 @@ public class SP101_EQPT : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.47.0/SP101.cs

@@ -1,3 +1,4 @@
+#if v2_47_0
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -47,7 +48,9 @@ public class SP101 : EAFLoggingUnitTesting
         EAFLoggingUnitTesting?.Dispose();
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_47_0__SP101__txt()
     {
@@ -59,3 +62,4 @@ public class SP101 : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.49.0/MET08DDUPSP1TBI.cs

@@ -1,3 +1,4 @@
+#if v2_49_0
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -47,7 +48,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting?.Dispose();
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__MoveMatchingFiles()
     {
@@ -58,7 +61,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__OpenInsightMetrologyViewer()
     {
@@ -69,7 +74,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__IQSSi()
     {
@@ -80,7 +87,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__OpenInsight()
     {
@@ -91,7 +100,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__OpenInsightMetrologyViewerAttachments()
     {
@@ -102,7 +113,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__APC()
     {
@@ -113,7 +126,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__SPaCe()
     {
@@ -124,7 +139,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__Processed()
     {
@@ -135,7 +152,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__Archive()
     {
@@ -146,7 +165,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__Dummy()
     {
@@ -158,3 +179,4 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.49.0/SP101.cs

@@ -1,3 +1,4 @@
+#if v2_49_0
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -47,7 +48,9 @@ public class SP101 : EAFLoggingUnitTesting
         EAFLoggingUnitTesting?.Dispose();
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__SP101__txt()
     {
@@ -59,3 +62,4 @@ public class SP101 : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.49.2/MET08DDUPSP1TBI.cs

@@ -1,3 +1,4 @@
+#if v2_49_2
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -47,7 +48,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting?.Dispose();
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__MoveMatchingFiles()
     {
@@ -58,7 +61,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__OpenInsightMetrologyViewer()
     {
@@ -69,7 +74,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__IQSSi()
     {
@@ -80,7 +87,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__OpenInsight()
     {
@@ -91,7 +100,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__OpenInsightMetrologyViewerAttachments()
     {
@@ -102,7 +113,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__APC()
     {
@@ -113,7 +126,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__SPaCe()
     {
@@ -124,7 +139,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__Processed()
     {
@@ -135,7 +152,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__Archive()
     {
@@ -146,7 +165,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__Dummy()
     {
@@ -157,7 +178,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__TIBCO()
     {
@@ -169,3 +192,4 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.49.2/SP101.cs

@@ -1,3 +1,4 @@
+#if v2_49_2
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -47,7 +48,9 @@ public class SP101 : EAFLoggingUnitTesting
         EAFLoggingUnitTesting?.Dispose();
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__SP101__txt()
     {
@@ -59,3 +62,4 @@ public class SP101 : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.49.3/MET08DDUPSP1TBI.cs

@@ -1,3 +1,4 @@
+#if v2_49_3
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -47,7 +48,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting?.Dispose();
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__MoveMatchingFiles()
     {
@@ -58,7 +61,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__OpenInsightMetrologyViewer()
     {
@@ -69,7 +74,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__IQSSi()
     {
@@ -80,7 +87,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__OpenInsight()
     {
@@ -91,7 +100,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__OpenInsightMetrologyViewerAttachments()
     {
@@ -102,7 +113,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__APC()
     {
@@ -113,7 +126,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__SPaCe()
     {
@@ -124,7 +139,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__Processed()
     {
@@ -135,7 +152,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__Archive()
     {
@@ -146,7 +165,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__Dummy()
     {
@@ -157,7 +178,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__TIBCO()
     {
@@ -169,3 +192,4 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.49.3/SP101-EQPT.cs

@@ -1,3 +1,4 @@
+#if v2_49_3
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -66,3 +67,4 @@ public class SP101_EQPT : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.49.3/SP101.cs

@@ -1,3 +1,4 @@
+#if v2_49_3
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -47,7 +48,9 @@ public class SP101 : EAFLoggingUnitTesting
         EAFLoggingUnitTesting?.Dispose();
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__SP101__txt()
     {
@@ -59,3 +62,4 @@ public class SP101 : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.52.0/MET08DDUPSP1TBI.cs

@@ -1,3 +1,4 @@
+#if v2_52_0
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -177,7 +178,9 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
         EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_52_0__MET08DDUPSP1TBI__TIBCO()
     {
@@ -189,3 +192,4 @@ public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.52.0/SP101-EQPT.cs

@@ -1,3 +1,4 @@
+#if v2_52_0
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -53,9 +54,7 @@ public class SP101_EQPT : EAFLoggingUnitTesting
         catch (Exception) { }
     }
 
-#if DEBUG
     [Ignore]
-#endif
     [TestMethod]
     public void Staging__v2_52_0__SP101_EQPT__MoveAllFiles()
     {
@@ -68,3 +67,4 @@ public class SP101_EQPT : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.52.0/SP101.cs

@@ -1,3 +1,4 @@
+#if v2_52_0
 using Adaptation._Tests.Shared;
 using Microsoft.Extensions.Logging;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -61,3 +62,4 @@ public class SP101 : EAFLoggingUnitTesting
     }
 
 }
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.56.0/MET08DDUPSP1TBI.cs

@@ -0,0 +1,195 @@
+#if true
+using Adaptation._Tests.Shared;
+using Microsoft.Extensions.Logging;
+using Microsoft.VisualStudio.TestTools.UnitTesting;
+using System;
+using System.Diagnostics;
+using System.IO;
+using System.Reflection;
+
+namespace Adaptation._Tests.CreateSelfDescription.Staging.v2_56_0;
+
+[TestClass]
+public class MET08DDUPSP1TBI : EAFLoggingUnitTesting
+{
+
+#pragma warning disable CA2254
+#pragma warning disable IDE0060
+
+    internal static string DummyRoot { get; private set; }
+    internal static MET08DDUPSP1TBI EAFLoggingUnitTesting { get; private set; }
+
+    static MET08DDUPSP1TBI() => DummyRoot = @"\\mesfs.infineon.com\EC_Characterization_Si\Dummy";
+
+    public MET08DDUPSP1TBI() : base(DummyRoot, testContext: null, declaringType: null, skipEquipmentDictionary: false)
+    {
+        if (EAFLoggingUnitTesting is null)
+            throw new Exception();
+    }
+
+    public MET08DDUPSP1TBI(TestContext testContext) : base(DummyRoot, testContext, new StackFrame().GetMethod().DeclaringType, skipEquipmentDictionary: false)
+    {
+    }
+
+    [ClassInitialize]
+    public static void ClassInitialize(TestContext testContext)
+    {
+        EAFLoggingUnitTesting ??= new MET08DDUPSP1TBI(testContext);
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(testContext.TestName, " - ClassInitialize"));
+        string[] fileNameAndText = EAFLoggingUnitTesting.AdaptationTesting.GetCSharpText(testContext.TestName);
+        File.WriteAllText(fileNameAndText[0], fileNameAndText[1]);
+        File.WriteAllText(fileNameAndText[2], fileNameAndText[3]);
+    }
+
+    [ClassCleanup()]
+    public static void ClassCleanup()
+    {
+        EAFLoggingUnitTesting?.Logger?.LogInformation("Cleanup");
+        EAFLoggingUnitTesting?.Dispose();
+    }
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__MoveMatchingFiles()
+    {
+        string check = "*.pdsf";
+        MethodBase methodBase = new StackFrame().GetMethod();
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Getting configuration"));
+        _ = AdaptationTesting.GetWriteConfigurationGetFileRead(methodBase, check, EAFLoggingUnitTesting.AdaptationTesting);
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
+    }
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__OpenInsightMetrologyViewer()
+    {
+        string check = "*.pdsf";
+        MethodBase methodBase = new StackFrame().GetMethod();
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Getting configuration"));
+        _ = AdaptationTesting.GetWriteConfigurationGetFileRead(methodBase, check, EAFLoggingUnitTesting.AdaptationTesting);
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
+    }
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__IQSSi()
+    {
+        string check = "*.pdsf";
+        MethodBase methodBase = new StackFrame().GetMethod();
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Getting configuration"));
+        _ = AdaptationTesting.GetWriteConfigurationGetFileRead(methodBase, check, EAFLoggingUnitTesting.AdaptationTesting);
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
+    }
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__OpenInsight()
+    {
+        string check = "*.pdsf";
+        MethodBase methodBase = new StackFrame().GetMethod();
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Getting configuration"));
+        _ = AdaptationTesting.GetWriteConfigurationGetFileRead(methodBase, check, EAFLoggingUnitTesting.AdaptationTesting);
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
+    }
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__OpenInsightMetrologyViewerAttachments()
+    {
+        string check = "*.pdsf";
+        MethodBase methodBase = new StackFrame().GetMethod();
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Getting configuration"));
+        _ = AdaptationTesting.GetWriteConfigurationGetFileRead(methodBase, check, EAFLoggingUnitTesting.AdaptationTesting);
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
+    }
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__APC()
+    {
+        string check = "*.pdsf";
+        MethodBase methodBase = new StackFrame().GetMethod();
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Getting configuration"));
+        _ = AdaptationTesting.GetWriteConfigurationGetFileRead(methodBase, check, EAFLoggingUnitTesting.AdaptationTesting);
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
+    }
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__SPaCe()
+    {
+        string check = "*.pdsf";
+        MethodBase methodBase = new StackFrame().GetMethod();
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Getting configuration"));
+        _ = AdaptationTesting.GetWriteConfigurationGetFileRead(methodBase, check, EAFLoggingUnitTesting.AdaptationTesting);
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
+    }
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__Processed()
+    {
+        string check = "*.pdsf";
+        MethodBase methodBase = new StackFrame().GetMethod();
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Getting configuration"));
+        _ = AdaptationTesting.GetWriteConfigurationGetFileRead(methodBase, check, EAFLoggingUnitTesting.AdaptationTesting);
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
+    }
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__Archive()
+    {
+        string check = "*.pdsf";
+        MethodBase methodBase = new StackFrame().GetMethod();
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Getting configuration"));
+        _ = AdaptationTesting.GetWriteConfigurationGetFileRead(methodBase, check, EAFLoggingUnitTesting.AdaptationTesting);
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
+    }
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__Dummy()
+    {
+        string check = "637400748000000000.zip";
+        MethodBase methodBase = new StackFrame().GetMethod();
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Getting configuration"));
+        _ = AdaptationTesting.GetWriteConfigurationGetFileRead(methodBase, check, EAFLoggingUnitTesting.AdaptationTesting);
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
+    }
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__TIBCO()
+    {
+        string check = "*.idc";
+        MethodBase methodBase = new StackFrame().GetMethod();
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Getting configuration"));
+        _ = AdaptationTesting.GetWriteConfigurationGetFileRead(methodBase, check, EAFLoggingUnitTesting.AdaptationTesting);
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
+    }
+
+}
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.56.0/SP101-EQPT.cs

@@ -0,0 +1,70 @@
+#if true
+using Adaptation._Tests.Shared;
+using Microsoft.Extensions.Logging;
+using Microsoft.VisualStudio.TestTools.UnitTesting;
+using System;
+using System.Diagnostics;
+using System.IO;
+using System.Reflection;
+namespace Adaptation._Tests.CreateSelfDescription.Staging.v2_56_0;
+
+[TestClass]
+public class SP101_EQPT : EAFLoggingUnitTesting
+{
+
+#pragma warning disable CA2254
+#pragma warning disable IDE0060
+
+    internal static string DummyRoot { get; private set; }
+    internal static SP101_EQPT EAFLoggingUnitTesting { get; private set; }
+
+    static SP101_EQPT() => DummyRoot = @"\\mesfs.infineon.com\EC_Characterization_Si\Dummy";
+
+    public SP101_EQPT() : base(DummyRoot, testContext: null, declaringType: null, skipEquipmentDictionary: false)
+    {
+        if (EAFLoggingUnitTesting is null)
+            throw new Exception();
+    }
+
+    public SP101_EQPT(TestContext testContext) : base(DummyRoot, testContext, new StackFrame().GetMethod().DeclaringType, skipEquipmentDictionary: false)
+    {
+    }
+
+    [ClassInitialize]
+    public static void ClassInitialize(TestContext testContext)
+    {
+        EAFLoggingUnitTesting ??= new SP101_EQPT(testContext);
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(testContext.TestName, " - ClassInitialize"));
+        string[] fileNameAndText = EAFLoggingUnitTesting.AdaptationTesting.GetCSharpText(testContext.TestName);
+        File.WriteAllText(fileNameAndText[0], fileNameAndText[1]);
+        File.WriteAllText(fileNameAndText[2], fileNameAndText[3]);
+    }
+
+    [ClassCleanup()]
+    public static void ClassCleanup()
+    {
+        EAFLoggingUnitTesting?.Logger?.LogInformation("Cleanup");
+        EAFLoggingUnitTesting?.Dispose();
+    }
+
+    private static void NonThrowTryCatch()
+    {
+        try
+        { throw new Exception(); }
+        catch (Exception) { }
+    }
+
+    [Ignore]
+    [TestMethod]
+    public void Staging__v2_56_0__SP101_EQPT__MoveAllFiles()
+    {
+        string check = "*";
+        MethodBase methodBase = new StackFrame().GetMethod();
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Getting configuration"));
+        _ = AdaptationTesting.GetWriteConfigurationGetFileRead(methodBase, check, EAFLoggingUnitTesting.AdaptationTesting);
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
+        NonThrowTryCatch();
+    }
+
+}
+#endif

Adaptation/_Tests/CreateSelfDescription/Staging/v2.56.0/SP101.cs

@@ -0,0 +1,65 @@
+#if true
+using Adaptation._Tests.Shared;
+using Microsoft.Extensions.Logging;
+using Microsoft.VisualStudio.TestTools.UnitTesting;
+using System;
+using System.Diagnostics;
+using System.IO;
+using System.Reflection;
+
+namespace Adaptation._Tests.CreateSelfDescription.Staging.v2_56_0;
+
+[TestClass]
+public class SP101 : EAFLoggingUnitTesting
+{
+
+#pragma warning disable CA2254
+#pragma warning disable IDE0060
+
+    internal static string DummyRoot { get; private set; }
+    internal static SP101 EAFLoggingUnitTesting { get; private set; }
+
+    static SP101() => DummyRoot = @"\\mesfs.infineon.com\EC_Characterization_Si\Dummy";
+
+    public SP101() : base(DummyRoot, testContext: null, declaringType: null, skipEquipmentDictionary: false)
+    {
+        if (EAFLoggingUnitTesting is null)
+            throw new Exception();
+    }
+
+    public SP101(TestContext testContext) : base(DummyRoot, testContext, new StackFrame().GetMethod().DeclaringType, skipEquipmentDictionary: false)
+    {
+    }
+
+    [ClassInitialize]
+    public static void ClassInitialize(TestContext testContext)
+    {
+        EAFLoggingUnitTesting ??= new SP101(testContext);
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(testContext.TestName, " - ClassInitialize"));
+        string[] fileNameAndText = EAFLoggingUnitTesting.AdaptationTesting.GetCSharpText(testContext.TestName);
+        File.WriteAllText(fileNameAndText[0], fileNameAndText[1]);
+        File.WriteAllText(fileNameAndText[2], fileNameAndText[3]);
+    }
+
+    [ClassCleanup()]
+    public static void ClassCleanup()
+    {
+        EAFLoggingUnitTesting?.Logger?.LogInformation("Cleanup");
+        EAFLoggingUnitTesting?.Dispose();
+    }
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__SP101__txt()
+    {
+        string check = "*.txt";
+        MethodBase methodBase = new StackFrame().GetMethod();
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Getting configuration"));
+        _ = AdaptationTesting.GetWriteConfigurationGetFileRead(methodBase, check, EAFLoggingUnitTesting.AdaptationTesting);
+        EAFLoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Exit"));
+    }
+
+}
+#endif

Adaptation/_Tests/Extract/Staging/v2.39.0/MET08DDUPSP1TBI.cs

@@ -1,3 +1,4 @@
+#if v2_39_0
 using Microsoft.VisualStudio.TestTools.UnitTesting;
 
 namespace Adaptation._Tests.Extract.Staging.v2_39_0;
@@ -19,3 +20,4 @@ public class MET08DDUPSP1TBI
     }
 
 }
+#endif

Adaptation/_Tests/Extract/Staging/v2.39.0/SP101-EQPT.cs

@@ -1,3 +1,4 @@
+#if v2_39_0
 using Microsoft.VisualStudio.TestTools.UnitTesting;
 
 namespace Adaptation._Tests.Extract.Staging.v2_39_0;
@@ -18,10 +19,11 @@ public class SP101_EQPT
         _SP101_EQPT = CreateSelfDescription.Staging.v2_39_0.SP101_EQPT.EAFLoggingUnitTesting;
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_39_0__SP101_EQPT__MoveAllFiles() => _SP101_EQPT.Staging__v2_39_0__SP101_EQPT__MoveAllFiles();
 
 }
+#endif

Adaptation/_Tests/Extract/Staging/v2.39.0/SP101.cs

@@ -1,3 +1,4 @@
+#if v2_39_0
 using Microsoft.VisualStudio.TestTools.UnitTesting;
 
 namespace Adaptation._Tests.Extract.Staging.v2_39_0;
@@ -18,10 +19,11 @@ public class SP101
         _SP101 = CreateSelfDescription.Staging.v2_39_0.SP101.EAFLoggingUnitTesting;
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_39_0__SP101__txt() => _SP101.Staging__v2_39_0__SP101__txt();
 
 }
+#endif

Adaptation/_Tests/Extract/Staging/v2.43.0/MET08DDUPSP1TBI.cs

@@ -1,3 +1,4 @@
+#if v2_43_0
 using Microsoft.VisualStudio.TestTools.UnitTesting;
 
 namespace Adaptation._Tests.Extract.Staging.v2_43_0;
@@ -18,64 +19,65 @@ public class MET08DDUPSP1TBI
         _MET08DDUPSP1TBI = CreateSelfDescription.Staging.v2_43_0.MET08DDUPSP1TBI.EAFLoggingUnitTesting;
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_0__MET08DDUPSP1TBI__MoveMatchingFiles() => _MET08DDUPSP1TBI.Staging__v2_43_0__MET08DDUPSP1TBI__MoveMatchingFiles();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_0__MET08DDUPSP1TBI__OpenInsightMetrologyViewer() => _MET08DDUPSP1TBI.Staging__v2_43_0__MET08DDUPSP1TBI__OpenInsightMetrologyViewer();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_0__MET08DDUPSP1TBI__IQSSi() => _MET08DDUPSP1TBI.Staging__v2_43_0__MET08DDUPSP1TBI__IQSSi();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_0__MET08DDUPSP1TBI__OpenInsight() => _MET08DDUPSP1TBI.Staging__v2_43_0__MET08DDUPSP1TBI__OpenInsight();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_0__MET08DDUPSP1TBI__OpenInsightMetrologyViewerAttachments() => _MET08DDUPSP1TBI.Staging__v2_43_0__MET08DDUPSP1TBI__OpenInsightMetrologyViewerAttachments();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_0__MET08DDUPSP1TBI__APC() => _MET08DDUPSP1TBI.Staging__v2_43_0__MET08DDUPSP1TBI__APC();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_0__MET08DDUPSP1TBI__SPaCe() => _MET08DDUPSP1TBI.Staging__v2_43_0__MET08DDUPSP1TBI__SPaCe();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_0__MET08DDUPSP1TBI__Processed() => _MET08DDUPSP1TBI.Staging__v2_43_0__MET08DDUPSP1TBI__Processed();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_0__MET08DDUPSP1TBI__Archive() => _MET08DDUPSP1TBI.Staging__v2_43_0__MET08DDUPSP1TBI__Archive();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_0__MET08DDUPSP1TBI__Dummy() => _MET08DDUPSP1TBI.Staging__v2_43_0__MET08DDUPSP1TBI__Dummy();
 
 }
+#endif

Adaptation/_Tests/Extract/Staging/v2.43.0/SP101-EQPT.cs

@@ -1,3 +1,4 @@
+#if v2_43_0
 using Microsoft.VisualStudio.TestTools.UnitTesting;
 
 namespace Adaptation._Tests.Extract.Staging.v2_43_0;
@@ -18,10 +19,11 @@ public class SP101_EQPT
         _SP101_EQPT = CreateSelfDescription.Staging.v2_43_0.SP101_EQPT.EAFLoggingUnitTesting;
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_0__SP101_EQPT__MoveAllFiles() => _SP101_EQPT.Staging__v2_43_0__SP101_EQPT__MoveAllFiles();
 
 }
+#endif

Adaptation/_Tests/Extract/Staging/v2.43.0/SP101.cs

@@ -1,3 +1,4 @@
+#if v2_43_0
 using Microsoft.VisualStudio.TestTools.UnitTesting;
 
 namespace Adaptation._Tests.Extract.Staging.v2_43_0;
@@ -18,10 +19,11 @@ public class SP101
         _SP101 = CreateSelfDescription.Staging.v2_43_0.SP101.EAFLoggingUnitTesting;
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_0__SP101__txt() => _SP101.Staging__v2_43_0__SP101__txt();
 
 }
+#endif

Adaptation/_Tests/Extract/Staging/v2.43.3/MET08DDUPSP1TBI.cs

@@ -1,3 +1,4 @@
+#if v2_43_3
 using Microsoft.VisualStudio.TestTools.UnitTesting;
 
 namespace Adaptation._Tests.Extract.Staging.v2_43_3;
@@ -18,70 +19,71 @@ public class MET08DDUPSP1TBI
         _MET08DDUPSP1TBI = CreateSelfDescription.Staging.v2_43_3.MET08DDUPSP1TBI.EAFLoggingUnitTesting;
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_3__MET08DDUPSP1TBI__MoveMatchingFiles() => _MET08DDUPSP1TBI.Staging__v2_43_3__MET08DDUPSP1TBI__MoveMatchingFiles();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_3__MET08DDUPSP1TBI__OpenInsightMetrologyViewer() => _MET08DDUPSP1TBI.Staging__v2_43_3__MET08DDUPSP1TBI__OpenInsightMetrologyViewer();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_3__MET08DDUPSP1TBI__IQSSi() => _MET08DDUPSP1TBI.Staging__v2_43_3__MET08DDUPSP1TBI__IQSSi();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_3__MET08DDUPSP1TBI__OpenInsight() => _MET08DDUPSP1TBI.Staging__v2_43_3__MET08DDUPSP1TBI__OpenInsight();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_3__MET08DDUPSP1TBI__OpenInsightMetrologyViewerAttachments() => _MET08DDUPSP1TBI.Staging__v2_43_3__MET08DDUPSP1TBI__OpenInsightMetrologyViewerAttachments();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_3__MET08DDUPSP1TBI__APC() => _MET08DDUPSP1TBI.Staging__v2_43_3__MET08DDUPSP1TBI__APC();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_3__MET08DDUPSP1TBI__SPaCe() => _MET08DDUPSP1TBI.Staging__v2_43_3__MET08DDUPSP1TBI__SPaCe();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_3__MET08DDUPSP1TBI__Processed() => _MET08DDUPSP1TBI.Staging__v2_43_3__MET08DDUPSP1TBI__Processed();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_3__MET08DDUPSP1TBI__Archive() => _MET08DDUPSP1TBI.Staging__v2_43_3__MET08DDUPSP1TBI__Archive();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_3__MET08DDUPSP1TBI__Dummy() => _MET08DDUPSP1TBI.Staging__v2_43_3__MET08DDUPSP1TBI__Dummy();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_3__MET08DDUPSP1TBI__TIBCO() => _MET08DDUPSP1TBI.Staging__v2_43_3__MET08DDUPSP1TBI__TIBCO();
 
 }
+#endif

Adaptation/_Tests/Extract/Staging/v2.43.4/MET08DDUPSP1TBI.cs

@@ -1,3 +1,4 @@
+#if v2_43_4
 using Adaptation.Shared;
 using Adaptation.Shared.Methods;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -22,13 +23,13 @@ public class MET08DDUPSP1TBI
         _MET08DDUPSP1TBI = CreateSelfDescription.Staging.v2_43_4.MET08DDUPSP1TBI.EAFLoggingUnitTesting;
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_4__MET08DDUPSP1TBI__MoveMatchingFiles() => _MET08DDUPSP1TBI.Staging__v2_43_4__MET08DDUPSP1TBI__MoveMatchingFiles();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -44,58 +45,59 @@ public class MET08DDUPSP1TBI
         _ = Shared.AdaptationTesting.ReExtractCompareUpdatePassDirectory(variables, fileRead, logistics, validatePDSF);
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_4__MET08DDUPSP1TBI__OpenInsightMetrologyViewer() => _MET08DDUPSP1TBI.Staging__v2_43_4__MET08DDUPSP1TBI__OpenInsightMetrologyViewer();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_4__MET08DDUPSP1TBI__IQSSi() => _MET08DDUPSP1TBI.Staging__v2_43_4__MET08DDUPSP1TBI__IQSSi();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_4__MET08DDUPSP1TBI__OpenInsight() => _MET08DDUPSP1TBI.Staging__v2_43_4__MET08DDUPSP1TBI__OpenInsight();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_4__MET08DDUPSP1TBI__OpenInsightMetrologyViewerAttachments() => _MET08DDUPSP1TBI.Staging__v2_43_4__MET08DDUPSP1TBI__OpenInsightMetrologyViewerAttachments();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_4__MET08DDUPSP1TBI__APC() => _MET08DDUPSP1TBI.Staging__v2_43_4__MET08DDUPSP1TBI__APC();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_4__MET08DDUPSP1TBI__SPaCe() => _MET08DDUPSP1TBI.Staging__v2_43_4__MET08DDUPSP1TBI__SPaCe();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_4__MET08DDUPSP1TBI__Processed() => _MET08DDUPSP1TBI.Staging__v2_43_4__MET08DDUPSP1TBI__Processed();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_4__MET08DDUPSP1TBI__Archive() => _MET08DDUPSP1TBI.Staging__v2_43_4__MET08DDUPSP1TBI__Archive();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_4__MET08DDUPSP1TBI__Dummy() => _MET08DDUPSP1TBI.Staging__v2_43_4__MET08DDUPSP1TBI__Dummy();
 
 }
+#endif

Adaptation/_Tests/Extract/Staging/v2.43.4/SP101.cs

@@ -1,3 +1,4 @@
+#if v2_43_4
 using Adaptation.Shared;
 using Adaptation.Shared.Methods;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -22,13 +23,13 @@ public class SP101
         _SP101 = CreateSelfDescription.Staging.v2_43_4.SP101.EAFLoggingUnitTesting;
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_43_4__SP101__txt() => _SP101.Staging__v2_43_4__SP101__txt();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -45,3 +46,4 @@ public class SP101
     }
 
 }
+#endif

Adaptation/_Tests/Extract/Staging/v2.47.0/SP101.cs

@@ -1,3 +1,4 @@
+#if v2_47_0
 using Adaptation.Shared;
 using Adaptation.Shared.Methods;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -22,11 +23,15 @@ public class SP101
         _SP101 = CreateSelfDescription.Staging.v2_47_0.SP101.EAFLoggingUnitTesting;
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_47_0__SP101__txt() => _SP101.Staging__v2_47_0__SP101__txt();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_47_0__SP101__txt637955319879801344__Normal()
     {
@@ -41,3 +46,4 @@ public class SP101
     }
 
 }
+#endif

Adaptation/_Tests/Extract/Staging/v2.49.0/MET08DDUPSP1TBI.cs

@@ -1,3 +1,4 @@
+#if v2_49_0
 using Adaptation.Shared;
 using Adaptation.Shared.Methods;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -22,11 +23,15 @@ public class MET08DDUPSP1TBI
         _MET08DDUPSP1TBI = CreateSelfDescription.Staging.v2_49_0.MET08DDUPSP1TBI.EAFLoggingUnitTesting;
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__MoveMatchingFiles() => _MET08DDUPSP1TBI.Staging__v2_49_0__MET08DDUPSP1TBI__MoveMatchingFiles();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__MoveMatchingFiles637955319879801344__Normal()
     {
@@ -40,19 +45,27 @@ public class MET08DDUPSP1TBI
         _ = Shared.AdaptationTesting.ReExtractCompareUpdatePassDirectory(variables, fileRead, logistics, validatePDSF);
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__OpenInsightMetrologyViewer() => _MET08DDUPSP1TBI.Staging__v2_49_0__MET08DDUPSP1TBI__OpenInsightMetrologyViewer();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__IQSSi() => _MET08DDUPSP1TBI.Staging__v2_49_0__MET08DDUPSP1TBI__IQSSi();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__OpenInsight() => _MET08DDUPSP1TBI.Staging__v2_49_0__MET08DDUPSP1TBI__OpenInsight();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__OpenInsight638052814829645888__IqsSql()
     {
@@ -65,28 +78,41 @@ public class MET08DDUPSP1TBI
         _ = Shared.AdaptationTesting.ReExtractCompareUpdatePassDirectory(variables, fileRead, logistics);
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__OpenInsightMetrologyViewerAttachments() => _MET08DDUPSP1TBI.Staging__v2_49_0__MET08DDUPSP1TBI__OpenInsightMetrologyViewerAttachments();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__APC() => _MET08DDUPSP1TBI.Staging__v2_49_0__MET08DDUPSP1TBI__APC();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__SPaCe() => _MET08DDUPSP1TBI.Staging__v2_49_0__MET08DDUPSP1TBI__SPaCe();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__Processed() => _MET08DDUPSP1TBI.Staging__v2_49_0__MET08DDUPSP1TBI__Processed();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__Archive() => _MET08DDUPSP1TBI.Staging__v2_49_0__MET08DDUPSP1TBI__Archive();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__MET08DDUPSP1TBI__Dummy() => _MET08DDUPSP1TBI.Staging__v2_49_0__MET08DDUPSP1TBI__Dummy();
 
 }
+#endif

Adaptation/_Tests/Extract/Staging/v2.49.0/SP101.cs

@@ -1,3 +1,4 @@
+#if v2_49_0
 using Adaptation.Shared;
 using Adaptation.Shared.Methods;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -22,11 +23,15 @@ public class SP101
         _SP101 = CreateSelfDescription.Staging.v2_49_0.SP101.EAFLoggingUnitTesting;
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__SP101__txt() => _SP101.Staging__v2_49_0__SP101__txt();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_0__SP101__txt637955319879801344__Normal()
     {
@@ -41,3 +46,4 @@ public class SP101
     }
 
 }
+#endif

Adaptation/_Tests/Extract/Staging/v2.49.2/MET08DDUPSP1TBI.cs

@@ -1,3 +1,4 @@
+#if v2_49_2
 using Adaptation.Shared;
 using Adaptation.Shared.Methods;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -30,11 +31,15 @@ public class MET08DDUPSP1TBI
         catch (Exception) { }
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__MoveMatchingFiles() => _MET08DDUPSP1TBI.Staging__v2_49_2__MET08DDUPSP1TBI__MoveMatchingFiles();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__MoveMatchingFiles637955319879801344__Normal()
     {
@@ -48,19 +53,27 @@ public class MET08DDUPSP1TBI
         _ = Shared.AdaptationTesting.ReExtractCompareUpdatePassDirectory(variables, fileRead, logistics, validatePDSF);
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__OpenInsightMetrologyViewer() => _MET08DDUPSP1TBI.Staging__v2_49_2__MET08DDUPSP1TBI__OpenInsightMetrologyViewer();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__IQSSi() => _MET08DDUPSP1TBI.Staging__v2_49_2__MET08DDUPSP1TBI__IQSSi();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__OpenInsight() => _MET08DDUPSP1TBI.Staging__v2_49_2__MET08DDUPSP1TBI__OpenInsight();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__OpenInsight638052814829645888__IqsSql()
     {
@@ -73,35 +86,51 @@ public class MET08DDUPSP1TBI
         _ = Shared.AdaptationTesting.ReExtractCompareUpdatePassDirectory(variables, fileRead, logistics);
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__OpenInsightMetrologyViewerAttachments() => _MET08DDUPSP1TBI.Staging__v2_49_2__MET08DDUPSP1TBI__OpenInsightMetrologyViewerAttachments();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__APC() => _MET08DDUPSP1TBI.Staging__v2_49_2__MET08DDUPSP1TBI__APC();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__SPaCe() => _MET08DDUPSP1TBI.Staging__v2_49_2__MET08DDUPSP1TBI__SPaCe();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__Processed() => _MET08DDUPSP1TBI.Staging__v2_49_2__MET08DDUPSP1TBI__Processed();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__Archive() => _MET08DDUPSP1TBI.Staging__v2_49_2__MET08DDUPSP1TBI__Archive();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__Dummy() => _MET08DDUPSP1TBI.Staging__v2_49_2__MET08DDUPSP1TBI__Dummy();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__TIBCO() => _MET08DDUPSP1TBI.Staging__v2_49_2__MET08DDUPSP1TBI__TIBCO();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__MET08DDUPSP1TBI__TIBCO638217888620242702__Normal()
     {
@@ -116,3 +145,4 @@ public class MET08DDUPSP1TBI
     }
 
 }
+#endif

Adaptation/_Tests/Extract/Staging/v2.49.2/SP101.cs

@@ -1,3 +1,4 @@
+#if v2_49_2
 using Adaptation.Shared;
 using Adaptation.Shared.Methods;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -22,11 +23,15 @@ public class SP101
         _SP101 = CreateSelfDescription.Staging.v2_49_2.SP101.EAFLoggingUnitTesting;
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__SP101__txt() => _SP101.Staging__v2_49_2__SP101__txt();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_2__SP101__txt637955319879801344__Normal()
     {
@@ -41,3 +46,4 @@ public class SP101
     }
 
 }
+#endif

Adaptation/_Tests/Extract/Staging/v2.49.3/MET08DDUPSP1TBI.cs

@@ -1,3 +1,4 @@
+#if v2_49_3
 using Adaptation.Shared;
 using Adaptation.Shared.Methods;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -30,11 +31,15 @@ public class MET08DDUPSP1TBI
         catch (Exception) { }
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__MoveMatchingFiles() => _MET08DDUPSP1TBI.Staging__v2_49_3__MET08DDUPSP1TBI__MoveMatchingFiles();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__MoveMatchingFiles637955319879801344__Normal()
     {
@@ -49,19 +54,27 @@ public class MET08DDUPSP1TBI
         NonThrowTryCatch();
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__OpenInsightMetrologyViewer() => _MET08DDUPSP1TBI.Staging__v2_49_3__MET08DDUPSP1TBI__OpenInsightMetrologyViewer();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__IQSSi() => _MET08DDUPSP1TBI.Staging__v2_49_3__MET08DDUPSP1TBI__IQSSi();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__OpenInsight() => _MET08DDUPSP1TBI.Staging__v2_49_3__MET08DDUPSP1TBI__OpenInsight();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__OpenInsight638052814829645888__IqsSql()
     {
@@ -75,37 +88,49 @@ public class MET08DDUPSP1TBI
         NonThrowTryCatch();
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__OpenInsightMetrologyViewerAttachments() => _MET08DDUPSP1TBI.Staging__v2_49_3__MET08DDUPSP1TBI__OpenInsightMetrologyViewerAttachments();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__APC() => _MET08DDUPSP1TBI.Staging__v2_49_3__MET08DDUPSP1TBI__APC();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__SPaCe() => _MET08DDUPSP1TBI.Staging__v2_49_3__MET08DDUPSP1TBI__SPaCe();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__Processed() => _MET08DDUPSP1TBI.Staging__v2_49_3__MET08DDUPSP1TBI__Processed();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__Archive() => _MET08DDUPSP1TBI.Staging__v2_49_3__MET08DDUPSP1TBI__Archive();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__Dummy() => _MET08DDUPSP1TBI.Staging__v2_49_3__MET08DDUPSP1TBI__Dummy();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_49_3__MET08DDUPSP1TBI__TIBCO() => _MET08DDUPSP1TBI.Staging__v2_49_3__MET08DDUPSP1TBI__TIBCO();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -122,3 +147,4 @@ public class MET08DDUPSP1TBI
     }
 
 }
+#endif

Adaptation/_Tests/Extract/Staging/v2.49.3/SP101-EQPT.cs

@@ -1,3 +1,4 @@
+#if v2_49_3
 using Microsoft.VisualStudio.TestTools.UnitTesting;
 
 namespace Adaptation._Tests.Extract.Staging.v2_49_3;
@@ -18,10 +19,11 @@ public class SP101_EQPT
         _SP101_EQPT = CreateSelfDescription.Staging.v2_49_3.SP101_EQPT.EAFLoggingUnitTesting;
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_49_3__SP101_EQPT__MoveAllFiles() => _SP101_EQPT.Staging__v2_49_3__SP101_EQPT__MoveAllFiles();
 
 }
+#endif

Adaptation/_Tests/Extract/Staging/v2.49.3/SP101.cs

@@ -1,3 +1,4 @@
+#if v2_49_3
 using Adaptation.Shared;
 using Adaptation.Shared.Methods;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -30,11 +31,15 @@ public class SP101
         catch (Exception) { }
     }
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__SP101__txt() => _SP101.Staging__v2_49_3__SP101__txt();
 
+#if DEBUG
     [Ignore]
+#endif
     [TestMethod]
     public void Staging__v2_49_3__SP101__txt637955319879801344__Normal()
     {
@@ -50,3 +55,4 @@ public class SP101
     }
 
 }
+#endif

Adaptation/_Tests/Extract/Staging/v2.52.0/MET08DDUPSP1TBI.cs

@@ -1,3 +1,4 @@
+#if v2_52_0
 using Adaptation.Shared;
 using Adaptation.Shared.Methods;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -123,13 +124,13 @@ public class MET08DDUPSP1TBI
     [TestMethod]
     public void Staging__v2_52_0__MET08DDUPSP1TBI__Dummy() => _MET08DDUPSP1TBI.Staging__v2_52_0__MET08DDUPSP1TBI__Dummy();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_52_0__MET08DDUPSP1TBI__TIBCO() => _MET08DDUPSP1TBI.Staging__v2_52_0__MET08DDUPSP1TBI__TIBCO();
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
@@ -146,3 +147,4 @@ public class MET08DDUPSP1TBI
     }
 
 }
+#endif

Adaptation/_Tests/Extract/Staging/v2.52.0/SP101-EQPT.cs

@@ -1,3 +1,4 @@
+#if v2_52_0
 using Microsoft.VisualStudio.TestTools.UnitTesting;
 
 namespace Adaptation._Tests.Extract.Staging.v2_52_0;
@@ -18,10 +19,11 @@ public class SP101_EQPT
         _SP101_EQPT = CreateSelfDescription.Staging.v2_52_0.SP101_EQPT.EAFLoggingUnitTesting;
     }
 
-#if true
+#if DEBUG
     [Ignore]
 #endif
     [TestMethod]
     public void Staging__v2_52_0__SP101_EQPT__MoveAllFiles() => _SP101_EQPT.Staging__v2_52_0__SP101_EQPT__MoveAllFiles();
 
 }
+#endif

Adaptation/_Tests/Extract/Staging/v2.52.0/SP101.cs

@@ -1,3 +1,4 @@
+#if v2_52_0
 using Adaptation.Shared;
 using Adaptation.Shared.Methods;
 using Microsoft.VisualStudio.TestTools.UnitTesting;
@@ -54,3 +55,4 @@ public class SP101
     }
 
 }
+#endif

Adaptation/_Tests/Extract/Staging/v2.56.0/MET08DDUPSP1TBI.cs

@@ -0,0 +1,148 @@
+#if true
+using Adaptation.Shared;
+using Adaptation.Shared.Methods;
+using Microsoft.VisualStudio.TestTools.UnitTesting;
+using System;
+using System.Diagnostics;
+using System.Reflection;
+
+namespace Adaptation._Tests.Extract.Staging.v2_56_0;
+
+[TestClass]
+public class MET08DDUPSP1TBI
+{
+
+#pragma warning disable CA2254
+#pragma warning disable IDE0060
+
+    private static CreateSelfDescription.Staging.v2_56_0.MET08DDUPSP1TBI _MET08DDUPSP1TBI;
+
+    [ClassInitialize]
+    public static void ClassInitialize(TestContext testContext)
+    {
+        CreateSelfDescription.Staging.v2_56_0.MET08DDUPSP1TBI.ClassInitialize(testContext);
+        _MET08DDUPSP1TBI = CreateSelfDescription.Staging.v2_56_0.MET08DDUPSP1TBI.EAFLoggingUnitTesting;
+    }
+
+    private static void NonThrowTryCatch()
+    {
+        try
+        { throw new Exception(); }
+        catch (Exception) { }
+    }
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__MoveMatchingFiles() => _MET08DDUPSP1TBI.Staging__v2_56_0__MET08DDUPSP1TBI__MoveMatchingFiles();
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__MoveMatchingFiles637955319879801344__Normal()
+    {
+        string check = "*.pdsf";
+        bool validatePDSF = false;
+        MethodBase methodBase = new StackFrame().GetMethod();
+        _MET08DDUPSP1TBI.Staging__v2_56_0__MET08DDUPSP1TBI__MoveMatchingFiles();
+        string[] variables = _MET08DDUPSP1TBI.AdaptationTesting.GetVariables(methodBase, check, validatePDSF);
+        IFileRead fileRead = _MET08DDUPSP1TBI.AdaptationTesting.Get(methodBase, sourceFileLocation: variables[2], sourceFileFilter: variables[3], useCyclicalForDescription: false);
+        Logistics logistics = new(fileRead);
+        _ = Shared.AdaptationTesting.ReExtractCompareUpdatePassDirectory(variables, fileRead, logistics, validatePDSF);
+        NonThrowTryCatch();
+    }
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__OpenInsightMetrologyViewer() => _MET08DDUPSP1TBI.Staging__v2_56_0__MET08DDUPSP1TBI__OpenInsightMetrologyViewer();
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__IQSSi() => _MET08DDUPSP1TBI.Staging__v2_56_0__MET08DDUPSP1TBI__IQSSi();
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__OpenInsight() => _MET08DDUPSP1TBI.Staging__v2_56_0__MET08DDUPSP1TBI__OpenInsight();
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__OpenInsight638052814829645888__IqsSql()
+    {
+        string check = "*.pdsf";
+        MethodBase methodBase = new StackFrame().GetMethod();
+        _MET08DDUPSP1TBI.Staging__v2_56_0__MET08DDUPSP1TBI__OpenInsight();
+        string[] variables = _MET08DDUPSP1TBI.AdaptationTesting.GetVariables(methodBase, check, validatePDSF: false);
+        IFileRead fileRead = _MET08DDUPSP1TBI.AdaptationTesting.Get(methodBase, sourceFileLocation: variables[2], sourceFileFilter: variables[3], useCyclicalForDescription: false);
+        Logistics logistics = new(fileRead);
+        _ = Shared.AdaptationTesting.ReExtractCompareUpdatePassDirectory(variables, fileRead, logistics);
+        NonThrowTryCatch();
+    }
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__OpenInsightMetrologyViewerAttachments() => _MET08DDUPSP1TBI.Staging__v2_56_0__MET08DDUPSP1TBI__OpenInsightMetrologyViewerAttachments();
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__APC() => _MET08DDUPSP1TBI.Staging__v2_56_0__MET08DDUPSP1TBI__APC();
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__SPaCe() => _MET08DDUPSP1TBI.Staging__v2_56_0__MET08DDUPSP1TBI__SPaCe();
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__Processed() => _MET08DDUPSP1TBI.Staging__v2_56_0__MET08DDUPSP1TBI__Processed();
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__Archive() => _MET08DDUPSP1TBI.Staging__v2_56_0__MET08DDUPSP1TBI__Archive();
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__Dummy() => _MET08DDUPSP1TBI.Staging__v2_56_0__MET08DDUPSP1TBI__Dummy();
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__TIBCO() => _MET08DDUPSP1TBI.Staging__v2_56_0__MET08DDUPSP1TBI__TIBCO();
+
+    [Ignore]
+    [TestMethod]
+    public void Staging__v2_56_0__MET08DDUPSP1TBI__TIBCO638217888620242702__Normal()
+    {
+        string check = "*.idc";
+        MethodBase methodBase = new StackFrame().GetMethod();
+        _MET08DDUPSP1TBI.Staging__v2_56_0__MET08DDUPSP1TBI__TIBCO();
+        string[] variables = _MET08DDUPSP1TBI.AdaptationTesting.GetVariables(methodBase, check, validatePDSF: false);
+        _ = _MET08DDUPSP1TBI.AdaptationTesting.Get(methodBase, sourceFileLocation: variables[2], sourceFileFilter: variables[3], useCyclicalForDescription: false);
+        for (int i = 0; i < int.MaxValue; i++)
+            System.Threading.Thread.Sleep(500);
+        NonThrowTryCatch();
+    }
+
+}
+#endif

Adaptation/_Tests/Extract/Staging/v2.56.0/SP101-EQPT.cs

@@ -0,0 +1,27 @@
+#if true
+using Microsoft.VisualStudio.TestTools.UnitTesting;
+
+namespace Adaptation._Tests.Extract.Staging.v2_56_0;
+
+[TestClass]
+public class SP101_EQPT
+{
+
+#pragma warning disable CA2254
+#pragma warning disable IDE0060
+
+    private static CreateSelfDescription.Staging.v2_56_0.SP101_EQPT _SP101_EQPT;
+
+    [ClassInitialize]
+    public static void ClassInitialize(TestContext testContext)
+    {
+        CreateSelfDescription.Staging.v2_56_0.SP101_EQPT.ClassInitialize(testContext);
+        _SP101_EQPT = CreateSelfDescription.Staging.v2_56_0.SP101_EQPT.EAFLoggingUnitTesting;
+    }
+
+    [Ignore]
+    [TestMethod]
+    public void Staging__v2_56_0__SP101_EQPT__MoveAllFiles() => _SP101_EQPT.Staging__v2_56_0__SP101_EQPT__MoveAllFiles();
+
+}
+#endif

Adaptation/_Tests/Extract/Staging/v2.56.0/SP101.cs

@@ -0,0 +1,58 @@
+#if true
+using Adaptation.Shared;
+using Adaptation.Shared.Methods;
+using Microsoft.VisualStudio.TestTools.UnitTesting;
+using System;
+using System.Diagnostics;
+using System.Reflection;
+
+namespace Adaptation._Tests.Extract.Staging.v2_56_0;
+
+[TestClass]
+public class SP101
+{
+
+#pragma warning disable CA2254
+#pragma warning disable IDE0060
+
+    private static CreateSelfDescription.Staging.v2_56_0.SP101 _SP101;
+
+    [ClassInitialize]
+    public static void ClassInitialize(TestContext testContext)
+    {
+        CreateSelfDescription.Staging.v2_56_0.SP101.ClassInitialize(testContext);
+        _SP101 = CreateSelfDescription.Staging.v2_56_0.SP101.EAFLoggingUnitTesting;
+    }
+
+    private static void NonThrowTryCatch()
+    {
+        try
+        { throw new Exception(); }
+        catch (Exception) { }
+    }
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__SP101__txt() => _SP101.Staging__v2_56_0__SP101__txt();
+
+#if DEBUG
+    [Ignore]
+#endif
+    [TestMethod]
+    public void Staging__v2_56_0__SP101__txt637955319879801344__Normal()
+    {
+        string check = "*.txt";
+        bool validatePDSF = false;
+        _SP101.Staging__v2_56_0__SP101__txt();
+        MethodBase methodBase = new StackFrame().GetMethod();
+        string[] variables = _SP101.AdaptationTesting.GetVariables(methodBase, check, validatePDSF);
+        IFileRead fileRead = _SP101.AdaptationTesting.Get(methodBase, sourceFileLocation: variables[2], sourceFileFilter: variables[3], useCyclicalForDescription: false);
+        Logistics logistics = new(fileRead);
+        _ = Shared.AdaptationTesting.ReExtractCompareUpdatePassDirectory(variables, fileRead, logistics, validatePDSF);
+        NonThrowTryCatch();
+    }
+
+}
+#endif

Adaptation/_Tests/Shared/AdaptationTesting.cs

@@ -97,9 +97,9 @@ public class AdaptationTesting : ISMTP
         result = environment switch
         {
             "LocalHost" => "localhost:9003",
-            "Development" => "eaf-dev.mesfs.infineon.com:9003",
+            "Development" => "eaf-dev.mes.infineon.com:9003",
-            "Staging" => "eaf-staging.mesfs.infineon.com:9003",
+            "Staging" => "eaf-staging.mes.infineon.com:9003",
-            "Production" => "eaf-prod.mesfs.infineon.com:9003",
+            "Production" => "eaf-prod.mes.infineon.com:9003",
             _ => throw new Exception(),
         };
         return result;
@@ -562,7 +562,7 @@ public class AdaptationTesting : ISMTP
                 else if (i == 1)
                 {
                     if (componentsCellComponentCellComponent.Equipment.EquipmentType.Version != cellInstanceVersionName)
-                        throw new Exception("Versions should match!");
+                        throw new Exception($"Versions should match! {componentsCellComponentCellComponent.Equipment.EquipmentType.Version} != {cellInstanceVersionName}");
                     equipmentTypeName = componentsCellComponentCellComponent.Equipment.EquipmentType.Name;
                     _ = stringBuilder.
                         AppendLine("#if true").
@@ -1244,6 +1244,8 @@ public class AdaptationTesting : ISMTP
     {
         string result;
         Tuple<string, Test[], JsonElement[], List<FileInfo>> extractResult = fileRead.ReExtract();
+        if (extractResult is null)
+            throw new Exception($"Using pattern {variables[4]} no file was found <{variables[2]}>");
         if (!fileRead.IsDuplicator)
         {
             Assert.IsFalse(string.IsNullOrEmpty(extractResult?.Item1));

Adaptation/_Tests/Static/Job.cs

@@ -43,18 +43,16 @@ public class Job : LoggingUnitTesting, IDisposable
         catch (Exception) { }
     }
 
-#if true
     [Ignore]
-#endif
     [TestMethod]
     public void TestJobA()
     {
         FileHandlers.TIBCO.Transport.Job job;
         MethodBase methodBase = new StackFrame().GetMethod();
-        string barcodeHostFileShare = @"\\mesfs.infineon.com\EC_Metrology_Si\BarcodeHost\API";
+        string metrologyFileShare = FileHandlers.TIBCO.FileRead.MetrologyFileShare;
-        string metrologyFileShare = @"\\mesfs.infineon.com\EC_Metrology_Si\WorkMaterialOut\API";
+        string barcodeHostFileShare = FileHandlers.TIBCO.FileRead.BarcodeHostFileShare;
+        string lsl2SQLConnectionString = FileHandlers.TIBCO.FileRead.LSL2SQLConnectionString;
         LoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Getting configuration"));
-        string lsl2SQLConnectionString = "Data Source=messqlec1.infineon.com\\PROD1,53959;Initial Catalog=LSL2SQL;Persist Security Info=True;User ID=srpadmin;Password=0okm9ijn;";
         job = new(lsl2SQLConnectionString, metrologyFileShare, barcodeHostFileShare, "{\"Area\": \"Si\", \"EquipmentType\": \"MET08RESIMAPCDE\", \"MesEntity\": \"CDE4\", \"Sequence\": \"123456789\", \"MID\": \"12-123456-1234\", \"Recipe\": \"Recipe\"}");
         Assert.IsTrue(!string.IsNullOrEmpty(job.ProcessType)); // == "21");
         Assert.IsTrue(job.LotName == "123456");
@@ -67,7 +65,7 @@ public class Job : LoggingUnitTesting, IDisposable
         Assert.IsTrue(!string.IsNullOrEmpty(job.ProcessType)); // == "51");
         Assert.IsTrue(job.LotName == "544481");
         Assert.IsTrue(!string.IsNullOrEmpty(job.ProductName)); //  == "5158");
-        job = new(lsl2SQLConnectionString, metrologyFileShare, barcodeHostFileShare, "{\"Area\": \"Si\", \"EquipmentType\": \"MET08RESIMAPCDE\", \"MesEntity\": \"CDE4\", \"Sequence\": \"123456789\", \"MID\": \"37\", \"Recipe\": \"Recipe\"}");
+        job = new(lsl2SQLConnectionString, metrologyFileShare, barcodeHostFileShare, "{\"Area\": \"Si\", \"EquipmentType\": \"MET08THFTIRQS408M\", \"MesEntity\": \"BIORAD2\", \"Sequence\": \"123456789\", \"MID\": \"37--\", \"Recipe\": \"Recipe\"}");
         Assert.IsTrue(job.ProcessType == "37");
         Assert.IsTrue(!string.IsNullOrEmpty(job.LotName)); // == "549918");
         Assert.IsTrue(!string.IsNullOrEmpty(job.ProductName)); // == "5101");
@@ -84,18 +82,16 @@ public class Job : LoggingUnitTesting, IDisposable
         NonThrowTryCatch();
     }
 
-#if true
     [Ignore]
-#endif
     [TestMethod]
     public void TestJobB()
     {
-        MethodBase methodBase = new StackFrame().GetMethod();
         FileHandlers.TIBCO.Transport.Job job;
-        string barcodeHostFileShare = @"\\mesfs.infineon.com\EC_Metrology_Si\BarcodeHost\API";
+        MethodBase methodBase = new StackFrame().GetMethod();
-        string metrologyFileShare = @"\\mesfs.infineon.com\EC_Metrology_Si\WorkMaterialOut\API";
+        string metrologyFileShare = FileHandlers.TIBCO.FileRead.MetrologyFileShare;
+        string barcodeHostFileShare = FileHandlers.TIBCO.FileRead.BarcodeHostFileShare;
+        string lsl2SQLConnectionString = FileHandlers.TIBCO.FileRead.LSL2SQLConnectionString;
         LoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Getting configuration"));
-        string lsl2SQLConnectionString = "Data Source=messqlec1.infineon.com\\PROD1,53959;Initial Catalog=LSL2SQL;Persist Security Info=True;User ID=srpadmin;Password=0okm9ijn;";
         job = new(lsl2SQLConnectionString, metrologyFileShare, barcodeHostFileShare, "{\"Area\": \"Si\", \"EquipmentType\": \"MET08RESIMAPCDE\", \"MesEntity\": \"CDE4\", \"Sequence\": \"123456789\", \"MID\": \"P1234\", \"Recipe\": \"Recipe\"}");
         Assert.IsTrue(!string.IsNullOrEmpty(job.ProcessType));
         Assert.IsTrue(!string.IsNullOrEmpty(job.LotName));
@@ -104,18 +100,16 @@ public class Job : LoggingUnitTesting, IDisposable
         NonThrowTryCatch();
     }
 
-#if true
     [Ignore]
-#endif
     [TestMethod]
     public void TestJobC()
     {
-        MethodBase methodBase = new StackFrame().GetMethod();
         FileHandlers.TIBCO.Transport.Job job;
-        string barcodeHostFileShare = @"\\mesfs.infineon.com\EC_Metrology_Si\BarcodeHost\API";
+        MethodBase methodBase = new StackFrame().GetMethod();
-        string metrologyFileShare = @"\\mesfs.infineon.com\EC_Metrology_Si\WorkMaterialOut\API";
+        string metrologyFileShare = FileHandlers.TIBCO.FileRead.MetrologyFileShare;
+        string barcodeHostFileShare = FileHandlers.TIBCO.FileRead.BarcodeHostFileShare;
+        string lsl2SQLConnectionString = FileHandlers.TIBCO.FileRead.LSL2SQLConnectionString;
         LoggingUnitTesting.Logger.LogInformation(string.Concat(methodBase.Name, " - Getting configuration"));
-        string lsl2SQLConnectionString = "Data Source=messqlec1.infineon.com\\PROD1,53959;Initial Catalog=LSL2SQL;Persist Security Info=True;User ID=srpadmin;Password=0okm9ijn;";
         job = new(lsl2SQLConnectionString, metrologyFileShare, barcodeHostFileShare, "{\"Area\": \"Si\", \"EquipmentType\": \"MET08RESIMAPCDE\", \"MesEntity\": \"BIORAD3\", \"Sequence\": \"638234699589174855\", \"MID\": \"33--\", \"Recipe\": \"Recipe\"}");
         Assert.IsTrue(!string.IsNullOrEmpty(job.ProcessType));
         Assert.IsTrue(!string.IsNullOrEmpty(job.LotName));

Adaptation/_Tests/Static/MET08DDUPSP1TBI.cs

@@ -64,7 +64,7 @@ public class MET08DDUPSP1TBI : LoggingUnitTesting, IDisposable
         StringBuilder results = new();
         (string cellInstanceName, string cellInstanceVersionName)[] collection = new (string, string)[]
         {
-            new("MET08DDUPSP1TBI", "v2.52.0"),
+            new("MET08DDUPSP1TBI", "v2.56.0"),
         };
         string staging = "http://mestsa07ec.infineon.com:9003/CellInstanceServiceV2";
         Shared.PasteSpecialXml.EAF.XML.API.CellInstance.CellInstanceVersion cellInstanceVersion;

Adaptation/_Tests/Static/txt.cs

@@ -210,8 +210,8 @@ public class TXT : LoggingUnitTesting, IDisposable
         StringBuilder results = new();
         (string cellInstanceName, string cellInstanceVersionName)[] collection = new (string, string)[]
         {
-            new("SP101", "v2.52.0"),
+            new("SP101", "v2.56.0"),
-            new("SP101-EQPT", "v2.52.0"),
+            new("SP101-EQPT", "v2.56.0"),
         };
         string staging = "http://mestsa07ec.infineon.com:9003/CellInstanceServiceV2";
         Shared.PasteSpecialXml.EAF.XML.API.CellInstance.CellInstanceVersion cellInstanceVersion;

MET08DDUPSP1TBI.csproj

@@ -51,6 +51,9 @@
   <PropertyGroup Condition=" '$(TargetFrameworkVersion)' == 'v4.8' ">
     <DefineConstants>NETFRAMEWORK;NET20;NET35;NET40;NET45;NET451;NET452;NET46;NET461;NET462;NET47;NET471;NET472;NET48;$(DefineConstants)</DefineConstants>
   </PropertyGroup>
+  <ItemGroup>
+    <RuntimeHostConfigurationOption Include="AssemblyName" Value="MET08DDUPSP1TBI" />
+  </ItemGroup>
   <ItemGroup>
     <Reference Include="System" />
     <Reference Include="System.Core" />
@@ -115,6 +118,8 @@
     <Compile Include="Adaptation\FileHandlers\Processed\FileRead.cs" />
     <Compile Include="Adaptation\FileHandlers\SPaCe\FileRead.cs" />
     <Compile Include="Adaptation\FileHandlers\TIBCO\FileRead.cs" />
+    <Compile Include="Adaptation\FileHandlers\TIBCO\Transport\Common.cs" />
+    <Compile Include="Adaptation\FileHandlers\TIBCO\Transport\CommonB.cs" />
     <Compile Include="Adaptation\FileHandlers\TIBCO\Transport\Input.cs" />
     <Compile Include="Adaptation\FileHandlers\TIBCO\Transport\Item.cs" />
     <Compile Include="Adaptation\FileHandlers\TIBCO\Transport\Job.cs" />
@@ -122,6 +127,7 @@
     <Compile Include="Adaptation\FileHandlers\TIBCO\Transport\Main.cs" />
     <Compile Include="Adaptation\FileHandlers\TIBCO\Transport\Run.cs" />
     <Compile Include="Adaptation\FileHandlers\TIBCO\Transport\WorkMaterialOut.cs" />
+    <Compile Include="Adaptation\FileHandlers\TIBCO\Transport\WorkOrder.cs" />
     <Compile Include="Adaptation\FileHandlers\txt\Description.cs" />
     <Compile Include="Adaptation\FileHandlers\txt\Descriptor.cs" />
     <Compile Include="Adaptation\FileHandlers\txt\Detail.cs" />
@@ -178,7 +184,7 @@
       <Version>7.2.4630.5</Version>
     </PackageReference>
     <PackageReference Include="Infineon.EAF.Runtime">
-      <Version>2.52.0</Version>
+      <Version>2.56.0</Version>
     </PackageReference>
     <PackageReference Include="Pdfbox">
       <Version>1.1.1</Version>