#205: Work on supporting OpenID Connect for auth

vendor/golang.org/x/crypto/AUTHORS

@@ -0,0 +1,3 @@
+# This source code refers to The Go Authors for copyright purposes.
+# The master list of authors is in the main Go distribution,
+# visible at https://tip.golang.org/AUTHORS.

vendor/golang.org/x/crypto/CONTRIBUTORS

@@ -0,0 +1,3 @@
+# This source code was written by the Go contributors.
+# The master list of contributors is in the main Go distribution,
+# visible at https://tip.golang.org/CONTRIBUTORS.

vendor/golang.org/x/crypto/LICENSE

@@ -0,0 +1,27 @@
+Copyright (c) 2009 The Go Authors. All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+   * Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+   * Redistributions in binary form must reproduce the above
+copyright notice, this list of conditions and the following disclaimer
+in the documentation and/or other materials provided with the
+distribution.
+   * Neither the name of Google Inc. nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

vendor/golang.org/x/crypto/PATENTS

@@ -0,0 +1,22 @@
+Additional IP Rights Grant (Patents)
+
+"This implementation" means the copyrightable works distributed by
+Google as part of the Go project.
+
+Google hereby grants to You a perpetual, worldwide, non-exclusive,
+no-charge, royalty-free, irrevocable (except as stated in this section)
+patent license to make, have made, use, offer to sell, sell, import,
+transfer and otherwise run, modify and propagate the contents of this
+implementation of Go, where such license applies only to those patent
+claims, both currently owned or controlled by Google and acquired in
+the future, licensable by Google that are necessarily infringed by this
+implementation of Go.  This grant does not include claims that would be
+infringed only as a consequence of further modification of this
+implementation.  If you or your agent or exclusive licensee institute or
+order or agree to the institution of patent litigation against any
+entity (including a cross-claim or counterclaim in a lawsuit) alleging
+that this implementation of Go or any code incorporated within this
+implementation of Go constitutes direct or contributory patent
+infringement, or inducement of patent infringement, then any patent
+rights granted to you under this License for this implementation of Go
+shall terminate as of the date such litigation is filed.

vendor/golang.org/x/crypto/ed25519/ed25519.go

@@ -0,0 +1,222 @@
+// Copyright 2016 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// In Go 1.13, the ed25519 package was promoted to the standard library as
+// crypto/ed25519, and this package became a wrapper for the standard library one.
+//
+// +build !go1.13
+
+// Package ed25519 implements the Ed25519 signature algorithm. See
+// https://ed25519.cr.yp.to/.
+//
+// These functions are also compatible with the “Ed25519” function defined in
+// RFC 8032. However, unlike RFC 8032's formulation, this package's private key
+// representation includes a public key suffix to make multiple signing
+// operations with the same key more efficient. This package refers to the RFC
+// 8032 private key as the “seed”.
+package ed25519
+
+// This code is a port of the public domain, “ref10” implementation of ed25519
+// from SUPERCOP.
+
+import (
+	"bytes"
+	"crypto"
+	cryptorand "crypto/rand"
+	"crypto/sha512"
+	"errors"
+	"io"
+	"strconv"
+
+	"golang.org/x/crypto/ed25519/internal/edwards25519"
+)
+
+const (
+	// PublicKeySize is the size, in bytes, of public keys as used in this package.
+	PublicKeySize = 32
+	// PrivateKeySize is the size, in bytes, of private keys as used in this package.
+	PrivateKeySize = 64
+	// SignatureSize is the size, in bytes, of signatures generated and verified by this package.
+	SignatureSize = 64
+	// SeedSize is the size, in bytes, of private key seeds. These are the private key representations used by RFC 8032.
+	SeedSize = 32
+)
+
+// PublicKey is the type of Ed25519 public keys.
+type PublicKey []byte
+
+// PrivateKey is the type of Ed25519 private keys. It implements crypto.Signer.
+type PrivateKey []byte
+
+// Public returns the PublicKey corresponding to priv.
+func (priv PrivateKey) Public() crypto.PublicKey {
+	publicKey := make([]byte, PublicKeySize)
+	copy(publicKey, priv[32:])
+	return PublicKey(publicKey)
+}
+
+// Seed returns the private key seed corresponding to priv. It is provided for
+// interoperability with RFC 8032. RFC 8032's private keys correspond to seeds
+// in this package.
+func (priv PrivateKey) Seed() []byte {
+	seed := make([]byte, SeedSize)
+	copy(seed, priv[:32])
+	return seed
+}
+
+// Sign signs the given message with priv.
+// Ed25519 performs two passes over messages to be signed and therefore cannot
+// handle pre-hashed messages. Thus opts.HashFunc() must return zero to
+// indicate the message hasn't been hashed. This can be achieved by passing
+// crypto.Hash(0) as the value for opts.
+func (priv PrivateKey) Sign(rand io.Reader, message []byte, opts crypto.SignerOpts) (signature []byte, err error) {
+	if opts.HashFunc() != crypto.Hash(0) {
+		return nil, errors.New("ed25519: cannot sign hashed message")
+	}
+
+	return Sign(priv, message), nil
+}
+
+// GenerateKey generates a public/private key pair using entropy from rand.
+// If rand is nil, crypto/rand.Reader will be used.
+func GenerateKey(rand io.Reader) (PublicKey, PrivateKey, error) {
+	if rand == nil {
+		rand = cryptorand.Reader
+	}
+
+	seed := make([]byte, SeedSize)
+	if _, err := io.ReadFull(rand, seed); err != nil {
+		return nil, nil, err
+	}
+
+	privateKey := NewKeyFromSeed(seed)
+	publicKey := make([]byte, PublicKeySize)
+	copy(publicKey, privateKey[32:])
+
+	return publicKey, privateKey, nil
+}
+
+// NewKeyFromSeed calculates a private key from a seed. It will panic if
+// len(seed) is not SeedSize. This function is provided for interoperability
+// with RFC 8032. RFC 8032's private keys correspond to seeds in this
+// package.
+func NewKeyFromSeed(seed []byte) PrivateKey {
+	if l := len(seed); l != SeedSize {
+		panic("ed25519: bad seed length: " + strconv.Itoa(l))
+	}
+
+	digest := sha512.Sum512(seed)
+	digest[0] &= 248
+	digest[31] &= 127
+	digest[31] |= 64
+
+	var A edwards25519.ExtendedGroupElement
+	var hBytes [32]byte
+	copy(hBytes[:], digest[:])
+	edwards25519.GeScalarMultBase(&A, &hBytes)
+	var publicKeyBytes [32]byte
+	A.ToBytes(&publicKeyBytes)
+
+	privateKey := make([]byte, PrivateKeySize)
+	copy(privateKey, seed)
+	copy(privateKey[32:], publicKeyBytes[:])
+
+	return privateKey
+}
+
+// Sign signs the message with privateKey and returns a signature. It will
+// panic if len(privateKey) is not PrivateKeySize.
+func Sign(privateKey PrivateKey, message []byte) []byte {
+	if l := len(privateKey); l != PrivateKeySize {
+		panic("ed25519: bad private key length: " + strconv.Itoa(l))
+	}
+
+	h := sha512.New()
+	h.Write(privateKey[:32])
+
+	var digest1, messageDigest, hramDigest [64]byte
+	var expandedSecretKey [32]byte
+	h.Sum(digest1[:0])
+	copy(expandedSecretKey[:], digest1[:])
+	expandedSecretKey[0] &= 248
+	expandedSecretKey[31] &= 63
+	expandedSecretKey[31] |= 64
+
+	h.Reset()
+	h.Write(digest1[32:])
+	h.Write(message)
+	h.Sum(messageDigest[:0])
+
+	var messageDigestReduced [32]byte
+	edwards25519.ScReduce(&messageDigestReduced, &messageDigest)
+	var R edwards25519.ExtendedGroupElement
+	edwards25519.GeScalarMultBase(&R, &messageDigestReduced)
+
+	var encodedR [32]byte
+	R.ToBytes(&encodedR)
+
+	h.Reset()
+	h.Write(encodedR[:])
+	h.Write(privateKey[32:])
+	h.Write(message)
+	h.Sum(hramDigest[:0])
+	var hramDigestReduced [32]byte
+	edwards25519.ScReduce(&hramDigestReduced, &hramDigest)
+
+	var s [32]byte
+	edwards25519.ScMulAdd(&s, &hramDigestReduced, &expandedSecretKey, &messageDigestReduced)
+
+	signature := make([]byte, SignatureSize)
+	copy(signature[:], encodedR[:])
+	copy(signature[32:], s[:])
+
+	return signature
+}
+
+// Verify reports whether sig is a valid signature of message by publicKey. It
+// will panic if len(publicKey) is not PublicKeySize.
+func Verify(publicKey PublicKey, message, sig []byte) bool {
+	if l := len(publicKey); l != PublicKeySize {
+		panic("ed25519: bad public key length: " + strconv.Itoa(l))
+	}
+
+	if len(sig) != SignatureSize || sig[63]&224 != 0 {
+		return false
+	}
+
+	var A edwards25519.ExtendedGroupElement
+	var publicKeyBytes [32]byte
+	copy(publicKeyBytes[:], publicKey)
+	if !A.FromBytes(&publicKeyBytes) {
+		return false
+	}
+	edwards25519.FeNeg(&A.X, &A.X)
+	edwards25519.FeNeg(&A.T, &A.T)
+
+	h := sha512.New()
+	h.Write(sig[:32])
+	h.Write(publicKey[:])
+	h.Write(message)
+	var digest [64]byte
+	h.Sum(digest[:0])
+
+	var hReduced [32]byte
+	edwards25519.ScReduce(&hReduced, &digest)
+
+	var R edwards25519.ProjectiveGroupElement
+	var s [32]byte
+	copy(s[:], sig[32:])
+
+	// https://tools.ietf.org/html/rfc8032#section-5.1.7 requires that s be in
+	// the range [0, order) in order to prevent signature malleability.
+	if !edwards25519.ScMinimal(&s) {
+		return false
+	}
+
+	edwards25519.GeDoubleScalarMultVartime(&R, &hReduced, &A, &s)
+
+	var checkR [32]byte
+	R.ToBytes(&checkR)
+	return bytes.Equal(sig[:32], checkR[:])
+}

vendor/golang.org/x/crypto/ed25519/ed25519_go113.go

@@ -0,0 +1,73 @@
+// Copyright 2019 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build go1.13
+
+// Package ed25519 implements the Ed25519 signature algorithm. See
+// https://ed25519.cr.yp.to/.
+//
+// These functions are also compatible with the “Ed25519” function defined in
+// RFC 8032. However, unlike RFC 8032's formulation, this package's private key
+// representation includes a public key suffix to make multiple signing
+// operations with the same key more efficient. This package refers to the RFC
+// 8032 private key as the “seed”.
+//
+// Beginning with Go 1.13, the functionality of this package was moved to the
+// standard library as crypto/ed25519. This package only acts as a compatibility
+// wrapper.
+package ed25519
+
+import (
+	"crypto/ed25519"
+	"io"
+)
+
+const (
+	// PublicKeySize is the size, in bytes, of public keys as used in this package.
+	PublicKeySize = 32
+	// PrivateKeySize is the size, in bytes, of private keys as used in this package.
+	PrivateKeySize = 64
+	// SignatureSize is the size, in bytes, of signatures generated and verified by this package.
+	SignatureSize = 64
+	// SeedSize is the size, in bytes, of private key seeds. These are the private key representations used by RFC 8032.
+	SeedSize = 32
+)
+
+// PublicKey is the type of Ed25519 public keys.
+//
+// This type is an alias for crypto/ed25519's PublicKey type.
+// See the crypto/ed25519 package for the methods on this type.
+type PublicKey = ed25519.PublicKey
+
+// PrivateKey is the type of Ed25519 private keys. It implements crypto.Signer.
+//
+// This type is an alias for crypto/ed25519's PrivateKey type.
+// See the crypto/ed25519 package for the methods on this type.
+type PrivateKey = ed25519.PrivateKey
+
+// GenerateKey generates a public/private key pair using entropy from rand.
+// If rand is nil, crypto/rand.Reader will be used.
+func GenerateKey(rand io.Reader) (PublicKey, PrivateKey, error) {
+	return ed25519.GenerateKey(rand)
+}
+
+// NewKeyFromSeed calculates a private key from a seed. It will panic if
+// len(seed) is not SeedSize. This function is provided for interoperability
+// with RFC 8032. RFC 8032's private keys correspond to seeds in this
+// package.
+func NewKeyFromSeed(seed []byte) PrivateKey {
+	return ed25519.NewKeyFromSeed(seed)
+}
+
+// Sign signs the message with privateKey and returns a signature. It will
+// panic if len(privateKey) is not PrivateKeySize.
+func Sign(privateKey PrivateKey, message []byte) []byte {
+	return ed25519.Sign(privateKey, message)
+}
+
+// Verify reports whether sig is a valid signature of message by publicKey. It
+// will panic if len(publicKey) is not PublicKeySize.
+func Verify(publicKey PublicKey, message, sig []byte) bool {
+	return ed25519.Verify(publicKey, message, sig)
+}

vendor/golang.org/x/crypto/pbkdf2/pbkdf2.go

@@ -0,0 +1,77 @@
+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+/*
+Package pbkdf2 implements the key derivation function PBKDF2 as defined in RFC
+2898 / PKCS #5 v2.0.
+
+A key derivation function is useful when encrypting data based on a password
+or any other not-fully-random data. It uses a pseudorandom function to derive
+a secure encryption key based on the password.
+
+While v2.0 of the standard defines only one pseudorandom function to use,
+HMAC-SHA1, the drafted v2.1 specification allows use of all five FIPS Approved
+Hash Functions SHA-1, SHA-224, SHA-256, SHA-384 and SHA-512 for HMAC. To
+choose, you can pass the `New` functions from the different SHA packages to
+pbkdf2.Key.
+*/
+package pbkdf2 // import "golang.org/x/crypto/pbkdf2"
+
+import (
+	"crypto/hmac"
+	"hash"
+)
+
+// Key derives a key from the password, salt and iteration count, returning a
+// []byte of length keylen that can be used as cryptographic key. The key is
+// derived based on the method described as PBKDF2 with the HMAC variant using
+// the supplied hash function.
+//
+// For example, to use a HMAC-SHA-1 based PBKDF2 key derivation function, you
+// can get a derived key for e.g. AES-256 (which needs a 32-byte key) by
+// doing:
+//
+// 	dk := pbkdf2.Key([]byte("some password"), salt, 4096, 32, sha1.New)
+//
+// Remember to get a good random salt. At least 8 bytes is recommended by the
+// RFC.
+//
+// Using a higher iteration count will increase the cost of an exhaustive
+// search but will also make derivation proportionally slower.
+func Key(password, salt []byte, iter, keyLen int, h func() hash.Hash) []byte {
+	prf := hmac.New(h, password)
+	hashLen := prf.Size()
+	numBlocks := (keyLen + hashLen - 1) / hashLen
+
+	var buf [4]byte
+	dk := make([]byte, 0, numBlocks*hashLen)
+	U := make([]byte, hashLen)
+	for block := 1; block <= numBlocks; block++ {
+		// N.B.: || means concatenation, ^ means XOR
+		// for each block T_i = U_1 ^ U_2 ^ ... ^ U_iter
+		// U_1 = PRF(password, salt || uint(i))
+		prf.Reset()
+		prf.Write(salt)
+		buf[0] = byte(block >> 24)
+		buf[1] = byte(block >> 16)
+		buf[2] = byte(block >> 8)
+		buf[3] = byte(block)
+		prf.Write(buf[:4])
+		dk = prf.Sum(dk)
+		T := dk[len(dk)-hashLen:]
+		copy(U, T)
+
+		// U_n = PRF(password, U_(n-1))
+		for n := 2; n <= iter; n++ {
+			prf.Reset()
+			prf.Write(U)
+			U = U[:0]
+			U = prf.Sum(U)
+			for x := range U {
+				T[x] ^= U[x]
+			}
+		}
+	}
+	return dk[:keyLen]
+}