#205: Work on supporting OpenID Connect for auth

vendor/golang.org/x/crypto/AUTHORS

@@ -0,0 +1,3 @@
+# This source code refers to The Go Authors for copyright purposes.
+# The master list of authors is in the main Go distribution,
+# visible at https://tip.golang.org/AUTHORS.

vendor/golang.org/x/crypto/CONTRIBUTORS

@@ -0,0 +1,3 @@
+# This source code was written by the Go contributors.
+# The master list of contributors is in the main Go distribution,
+# visible at https://tip.golang.org/CONTRIBUTORS.

vendor/golang.org/x/crypto/LICENSE

@@ -0,0 +1,27 @@
+Copyright (c) 2009 The Go Authors. All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+   * Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+   * Redistributions in binary form must reproduce the above
+copyright notice, this list of conditions and the following disclaimer
+in the documentation and/or other materials provided with the
+distribution.
+   * Neither the name of Google Inc. nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

vendor/golang.org/x/crypto/PATENTS

@@ -0,0 +1,22 @@
+Additional IP Rights Grant (Patents)
+
+"This implementation" means the copyrightable works distributed by
+Google as part of the Go project.
+
+Google hereby grants to You a perpetual, worldwide, non-exclusive,
+no-charge, royalty-free, irrevocable (except as stated in this section)
+patent license to make, have made, use, offer to sell, sell, import,
+transfer and otherwise run, modify and propagate the contents of this
+implementation of Go, where such license applies only to those patent
+claims, both currently owned or controlled by Google and acquired in
+the future, licensable by Google that are necessarily infringed by this
+implementation of Go.  This grant does not include claims that would be
+infringed only as a consequence of further modification of this
+implementation.  If you or your agent or exclusive licensee institute or
+order or agree to the institution of patent litigation against any
+entity (including a cross-claim or counterclaim in a lawsuit) alleging
+that this implementation of Go or any code incorporated within this
+implementation of Go constitutes direct or contributory patent
+infringement, or inducement of patent infringement, then any patent
+rights granted to you under this License for this implementation of Go
+shall terminate as of the date such litigation is filed.

vendor/golang.org/x/crypto/ed25519/ed25519.go

@@ -0,0 +1,222 @@
+// Copyright 2016 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// In Go 1.13, the ed25519 package was promoted to the standard library as
+// crypto/ed25519, and this package became a wrapper for the standard library one.
+//
+// +build !go1.13
+
+// Package ed25519 implements the Ed25519 signature algorithm. See
+// https://ed25519.cr.yp.to/.
+//
+// These functions are also compatible with the “Ed25519” function defined in
+// RFC 8032. However, unlike RFC 8032's formulation, this package's private key
+// representation includes a public key suffix to make multiple signing
+// operations with the same key more efficient. This package refers to the RFC
+// 8032 private key as the “seed”.
+package ed25519
+
+// This code is a port of the public domain, “ref10” implementation of ed25519
+// from SUPERCOP.
+
+import (
+	"bytes"
+	"crypto"
+	cryptorand "crypto/rand"
+	"crypto/sha512"
+	"errors"
+	"io"
+	"strconv"
+
+	"golang.org/x/crypto/ed25519/internal/edwards25519"
+)
+
+const (
+	// PublicKeySize is the size, in bytes, of public keys as used in this package.
+	PublicKeySize = 32
+	// PrivateKeySize is the size, in bytes, of private keys as used in this package.
+	PrivateKeySize = 64
+	// SignatureSize is the size, in bytes, of signatures generated and verified by this package.
+	SignatureSize = 64
+	// SeedSize is the size, in bytes, of private key seeds. These are the private key representations used by RFC 8032.
+	SeedSize = 32
+)
+
+// PublicKey is the type of Ed25519 public keys.
+type PublicKey []byte
+
+// PrivateKey is the type of Ed25519 private keys. It implements crypto.Signer.
+type PrivateKey []byte
+
+// Public returns the PublicKey corresponding to priv.
+func (priv PrivateKey) Public() crypto.PublicKey {
+	publicKey := make([]byte, PublicKeySize)
+	copy(publicKey, priv[32:])
+	return PublicKey(publicKey)
+}
+
+// Seed returns the private key seed corresponding to priv. It is provided for
+// interoperability with RFC 8032. RFC 8032's private keys correspond to seeds
+// in this package.
+func (priv PrivateKey) Seed() []byte {
+	seed := make([]byte, SeedSize)
+	copy(seed, priv[:32])
+	return seed
+}
+
+// Sign signs the given message with priv.
+// Ed25519 performs two passes over messages to be signed and therefore cannot
+// handle pre-hashed messages. Thus opts.HashFunc() must return zero to
+// indicate the message hasn't been hashed. This can be achieved by passing
+// crypto.Hash(0) as the value for opts.
+func (priv PrivateKey) Sign(rand io.Reader, message []byte, opts crypto.SignerOpts) (signature []byte, err error) {
+	if opts.HashFunc() != crypto.Hash(0) {
+		return nil, errors.New("ed25519: cannot sign hashed message")
+	}
+
+	return Sign(priv, message), nil
+}
+
+// GenerateKey generates a public/private key pair using entropy from rand.
+// If rand is nil, crypto/rand.Reader will be used.
+func GenerateKey(rand io.Reader) (PublicKey, PrivateKey, error) {
+	if rand == nil {
+		rand = cryptorand.Reader
+	}
+
+	seed := make([]byte, SeedSize)
+	if _, err := io.ReadFull(rand, seed); err != nil {
+		return nil, nil, err
+	}
+
+	privateKey := NewKeyFromSeed(seed)
+	publicKey := make([]byte, PublicKeySize)
+	copy(publicKey, privateKey[32:])
+
+	return publicKey, privateKey, nil
+}
+
+// NewKeyFromSeed calculates a private key from a seed. It will panic if
+// len(seed) is not SeedSize. This function is provided for interoperability
+// with RFC 8032. RFC 8032's private keys correspond to seeds in this
+// package.
+func NewKeyFromSeed(seed []byte) PrivateKey {
+	if l := len(seed); l != SeedSize {
+		panic("ed25519: bad seed length: " + strconv.Itoa(l))
+	}
+
+	digest := sha512.Sum512(seed)
+	digest[0] &= 248
+	digest[31] &= 127
+	digest[31] |= 64
+
+	var A edwards25519.ExtendedGroupElement
+	var hBytes [32]byte
+	copy(hBytes[:], digest[:])
+	edwards25519.GeScalarMultBase(&A, &hBytes)
+	var publicKeyBytes [32]byte
+	A.ToBytes(&publicKeyBytes)
+
+	privateKey := make([]byte, PrivateKeySize)
+	copy(privateKey, seed)
+	copy(privateKey[32:], publicKeyBytes[:])
+
+	return privateKey
+}
+
+// Sign signs the message with privateKey and returns a signature. It will
+// panic if len(privateKey) is not PrivateKeySize.
+func Sign(privateKey PrivateKey, message []byte) []byte {
+	if l := len(privateKey); l != PrivateKeySize {
+		panic("ed25519: bad private key length: " + strconv.Itoa(l))
+	}
+
+	h := sha512.New()
+	h.Write(privateKey[:32])
+
+	var digest1, messageDigest, hramDigest [64]byte
+	var expandedSecretKey [32]byte
+	h.Sum(digest1[:0])
+	copy(expandedSecretKey[:], digest1[:])
+	expandedSecretKey[0] &= 248
+	expandedSecretKey[31] &= 63
+	expandedSecretKey[31] |= 64
+
+	h.Reset()
+	h.Write(digest1[32:])
+	h.Write(message)
+	h.Sum(messageDigest[:0])
+
+	var messageDigestReduced [32]byte
+	edwards25519.ScReduce(&messageDigestReduced, &messageDigest)
+	var R edwards25519.ExtendedGroupElement
+	edwards25519.GeScalarMultBase(&R, &messageDigestReduced)
+
+	var encodedR [32]byte
+	R.ToBytes(&encodedR)
+
+	h.Reset()
+	h.Write(encodedR[:])
+	h.Write(privateKey[32:])
+	h.Write(message)
+	h.Sum(hramDigest[:0])
+	var hramDigestReduced [32]byte
+	edwards25519.ScReduce(&hramDigestReduced, &hramDigest)
+
+	var s [32]byte
+	edwards25519.ScMulAdd(&s, &hramDigestReduced, &expandedSecretKey, &messageDigestReduced)
+
+	signature := make([]byte, SignatureSize)
+	copy(signature[:], encodedR[:])
+	copy(signature[32:], s[:])
+
+	return signature
+}
+
+// Verify reports whether sig is a valid signature of message by publicKey. It
+// will panic if len(publicKey) is not PublicKeySize.
+func Verify(publicKey PublicKey, message, sig []byte) bool {
+	if l := len(publicKey); l != PublicKeySize {
+		panic("ed25519: bad public key length: " + strconv.Itoa(l))
+	}
+
+	if len(sig) != SignatureSize || sig[63]&224 != 0 {
+		return false
+	}
+
+	var A edwards25519.ExtendedGroupElement
+	var publicKeyBytes [32]byte
+	copy(publicKeyBytes[:], publicKey)
+	if !A.FromBytes(&publicKeyBytes) {
+		return false
+	}
+	edwards25519.FeNeg(&A.X, &A.X)
+	edwards25519.FeNeg(&A.T, &A.T)
+
+	h := sha512.New()
+	h.Write(sig[:32])
+	h.Write(publicKey[:])
+	h.Write(message)
+	var digest [64]byte
+	h.Sum(digest[:0])
+
+	var hReduced [32]byte
+	edwards25519.ScReduce(&hReduced, &digest)
+
+	var R edwards25519.ProjectiveGroupElement
+	var s [32]byte
+	copy(s[:], sig[32:])
+
+	// https://tools.ietf.org/html/rfc8032#section-5.1.7 requires that s be in
+	// the range [0, order) in order to prevent signature malleability.
+	if !edwards25519.ScMinimal(&s) {
+		return false
+	}
+
+	edwards25519.GeDoubleScalarMultVartime(&R, &hReduced, &A, &s)
+
+	var checkR [32]byte
+	R.ToBytes(&checkR)
+	return bytes.Equal(sig[:32], checkR[:])
+}

vendor/golang.org/x/crypto/ed25519/ed25519_go113.go

@@ -0,0 +1,73 @@
+// Copyright 2019 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build go1.13
+
+// Package ed25519 implements the Ed25519 signature algorithm. See
+// https://ed25519.cr.yp.to/.
+//
+// These functions are also compatible with the “Ed25519” function defined in
+// RFC 8032. However, unlike RFC 8032's formulation, this package's private key
+// representation includes a public key suffix to make multiple signing
+// operations with the same key more efficient. This package refers to the RFC
+// 8032 private key as the “seed”.
+//
+// Beginning with Go 1.13, the functionality of this package was moved to the
+// standard library as crypto/ed25519. This package only acts as a compatibility
+// wrapper.
+package ed25519
+
+import (
+	"crypto/ed25519"
+	"io"
+)
+
+const (
+	// PublicKeySize is the size, in bytes, of public keys as used in this package.
+	PublicKeySize = 32
+	// PrivateKeySize is the size, in bytes, of private keys as used in this package.
+	PrivateKeySize = 64
+	// SignatureSize is the size, in bytes, of signatures generated and verified by this package.
+	SignatureSize = 64
+	// SeedSize is the size, in bytes, of private key seeds. These are the private key representations used by RFC 8032.
+	SeedSize = 32
+)
+
+// PublicKey is the type of Ed25519 public keys.
+//
+// This type is an alias for crypto/ed25519's PublicKey type.
+// See the crypto/ed25519 package for the methods on this type.
+type PublicKey = ed25519.PublicKey
+
+// PrivateKey is the type of Ed25519 private keys. It implements crypto.Signer.
+//
+// This type is an alias for crypto/ed25519's PrivateKey type.
+// See the crypto/ed25519 package for the methods on this type.
+type PrivateKey = ed25519.PrivateKey
+
+// GenerateKey generates a public/private key pair using entropy from rand.
+// If rand is nil, crypto/rand.Reader will be used.
+func GenerateKey(rand io.Reader) (PublicKey, PrivateKey, error) {
+	return ed25519.GenerateKey(rand)
+}
+
+// NewKeyFromSeed calculates a private key from a seed. It will panic if
+// len(seed) is not SeedSize. This function is provided for interoperability
+// with RFC 8032. RFC 8032's private keys correspond to seeds in this
+// package.
+func NewKeyFromSeed(seed []byte) PrivateKey {
+	return ed25519.NewKeyFromSeed(seed)
+}
+
+// Sign signs the message with privateKey and returns a signature. It will
+// panic if len(privateKey) is not PrivateKeySize.
+func Sign(privateKey PrivateKey, message []byte) []byte {
+	return ed25519.Sign(privateKey, message)
+}
+
+// Verify reports whether sig is a valid signature of message by publicKey. It
+// will panic if len(publicKey) is not PublicKeySize.
+func Verify(publicKey PublicKey, message, sig []byte) bool {
+	return ed25519.Verify(publicKey, message, sig)
+}

vendor/golang.org/x/crypto/pbkdf2/pbkdf2.go

@@ -0,0 +1,77 @@
+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+/*
+Package pbkdf2 implements the key derivation function PBKDF2 as defined in RFC
+2898 / PKCS #5 v2.0.
+
+A key derivation function is useful when encrypting data based on a password
+or any other not-fully-random data. It uses a pseudorandom function to derive
+a secure encryption key based on the password.
+
+While v2.0 of the standard defines only one pseudorandom function to use,
+HMAC-SHA1, the drafted v2.1 specification allows use of all five FIPS Approved
+Hash Functions SHA-1, SHA-224, SHA-256, SHA-384 and SHA-512 for HMAC. To
+choose, you can pass the `New` functions from the different SHA packages to
+pbkdf2.Key.
+*/
+package pbkdf2 // import "golang.org/x/crypto/pbkdf2"
+
+import (
+	"crypto/hmac"
+	"hash"
+)
+
+// Key derives a key from the password, salt and iteration count, returning a
+// []byte of length keylen that can be used as cryptographic key. The key is
+// derived based on the method described as PBKDF2 with the HMAC variant using
+// the supplied hash function.
+//
+// For example, to use a HMAC-SHA-1 based PBKDF2 key derivation function, you
+// can get a derived key for e.g. AES-256 (which needs a 32-byte key) by
+// doing:
+//
+// 	dk := pbkdf2.Key([]byte("some password"), salt, 4096, 32, sha1.New)
+//
+// Remember to get a good random salt. At least 8 bytes is recommended by the
+// RFC.
+//
+// Using a higher iteration count will increase the cost of an exhaustive
+// search but will also make derivation proportionally slower.
+func Key(password, salt []byte, iter, keyLen int, h func() hash.Hash) []byte {
+	prf := hmac.New(h, password)
+	hashLen := prf.Size()
+	numBlocks := (keyLen + hashLen - 1) / hashLen
+
+	var buf [4]byte
+	dk := make([]byte, 0, numBlocks*hashLen)
+	U := make([]byte, hashLen)
+	for block := 1; block <= numBlocks; block++ {
+		// N.B.: || means concatenation, ^ means XOR
+		// for each block T_i = U_1 ^ U_2 ^ ... ^ U_iter
+		// U_1 = PRF(password, salt || uint(i))
+		prf.Reset()
+		prf.Write(salt)
+		buf[0] = byte(block >> 24)
+		buf[1] = byte(block >> 16)
+		buf[2] = byte(block >> 8)
+		buf[3] = byte(block)
+		prf.Write(buf[:4])
+		dk = prf.Sum(dk)
+		T := dk[len(dk)-hashLen:]
+		copy(U, T)
+
+		// U_n = PRF(password, U_(n-1))
+		for n := 2; n <= iter; n++ {
+			prf.Reset()
+			prf.Write(U)
+			U = U[:0]
+			U = prf.Sum(U)
+			for x := range U {
+				T[x] ^= U[x]
+			}
+		}
+	}
+	return dk[:keyLen]
+}

vendor/golang.org/x/net/context/context.go

@@ -0,0 +1,56 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package context defines the Context type, which carries deadlines,
+// cancelation signals, and other request-scoped values across API boundaries
+// and between processes.
+// As of Go 1.7 this package is available in the standard library under the
+// name context.  https://golang.org/pkg/context.
+//
+// Incoming requests to a server should create a Context, and outgoing calls to
+// servers should accept a Context. The chain of function calls between must
+// propagate the Context, optionally replacing it with a modified copy created
+// using WithDeadline, WithTimeout, WithCancel, or WithValue.
+//
+// Programs that use Contexts should follow these rules to keep interfaces
+// consistent across packages and enable static analysis tools to check context
+// propagation:
+//
+// Do not store Contexts inside a struct type; instead, pass a Context
+// explicitly to each function that needs it. The Context should be the first
+// parameter, typically named ctx:
+//
+// 	func DoSomething(ctx context.Context, arg Arg) error {
+// 		// ... use ctx ...
+// 	}
+//
+// Do not pass a nil Context, even if a function permits it. Pass context.TODO
+// if you are unsure about which Context to use.
+//
+// Use context Values only for request-scoped data that transits processes and
+// APIs, not for passing optional parameters to functions.
+//
+// The same Context may be passed to functions running in different goroutines;
+// Contexts are safe for simultaneous use by multiple goroutines.
+//
+// See http://blog.golang.org/context for example code for a server that uses
+// Contexts.
+package context // import "golang.org/x/net/context"
+
+// Background returns a non-nil, empty Context. It is never canceled, has no
+// values, and has no deadline. It is typically used by the main function,
+// initialization, and tests, and as the top-level Context for incoming
+// requests.
+func Background() Context {
+	return background
+}
+
+// TODO returns a non-nil, empty Context. Code should use context.TODO when
+// it's unclear which Context to use or it is not yet available (because the
+// surrounding function has not yet been extended to accept a Context
+// parameter).  TODO is recognized by static analysis tools that determine
+// whether Contexts are propagated correctly in a program.
+func TODO() Context {
+	return todo
+}

vendor/golang.org/x/net/context/ctxhttp/ctxhttp.go

@@ -0,0 +1,71 @@
+// Copyright 2016 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package ctxhttp provides helper functions for performing context-aware HTTP requests.
+package ctxhttp // import "golang.org/x/net/context/ctxhttp"
+
+import (
+	"context"
+	"io"
+	"net/http"
+	"net/url"
+	"strings"
+)
+
+// Do sends an HTTP request with the provided http.Client and returns
+// an HTTP response.
+//
+// If the client is nil, http.DefaultClient is used.
+//
+// The provided ctx must be non-nil. If it is canceled or times out,
+// ctx.Err() will be returned.
+func Do(ctx context.Context, client *http.Client, req *http.Request) (*http.Response, error) {
+	if client == nil {
+		client = http.DefaultClient
+	}
+	resp, err := client.Do(req.WithContext(ctx))
+	// If we got an error, and the context has been canceled,
+	// the context's error is probably more useful.
+	if err != nil {
+		select {
+		case <-ctx.Done():
+			err = ctx.Err()
+		default:
+		}
+	}
+	return resp, err
+}
+
+// Get issues a GET request via the Do function.
+func Get(ctx context.Context, client *http.Client, url string) (*http.Response, error) {
+	req, err := http.NewRequest("GET", url, nil)
+	if err != nil {
+		return nil, err
+	}
+	return Do(ctx, client, req)
+}
+
+// Head issues a HEAD request via the Do function.
+func Head(ctx context.Context, client *http.Client, url string) (*http.Response, error) {
+	req, err := http.NewRequest("HEAD", url, nil)
+	if err != nil {
+		return nil, err
+	}
+	return Do(ctx, client, req)
+}
+
+// Post issues a POST request via the Do function.
+func Post(ctx context.Context, client *http.Client, url string, bodyType string, body io.Reader) (*http.Response, error) {
+	req, err := http.NewRequest("POST", url, body)
+	if err != nil {
+		return nil, err
+	}
+	req.Header.Set("Content-Type", bodyType)
+	return Do(ctx, client, req)
+}
+
+// PostForm issues a POST request via the Do function.
+func PostForm(ctx context.Context, client *http.Client, url string, data url.Values) (*http.Response, error) {
+	return Post(ctx, client, url, "application/x-www-form-urlencoded", strings.NewReader(data.Encode()))
+}

vendor/golang.org/x/net/context/go17.go

@@ -0,0 +1,73 @@
+// Copyright 2016 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build go1.7
+// +build go1.7
+
+package context
+
+import (
+	"context" // standard library's context, as of Go 1.7
+	"time"
+)
+
+var (
+	todo       = context.TODO()
+	background = context.Background()
+)
+
+// Canceled is the error returned by Context.Err when the context is canceled.
+var Canceled = context.Canceled
+
+// DeadlineExceeded is the error returned by Context.Err when the context's
+// deadline passes.
+var DeadlineExceeded = context.DeadlineExceeded
+
+// WithCancel returns a copy of parent with a new Done channel. The returned
+// context's Done channel is closed when the returned cancel function is called
+// or when the parent context's Done channel is closed, whichever happens first.
+//
+// Canceling this context releases resources associated with it, so code should
+// call cancel as soon as the operations running in this Context complete.
+func WithCancel(parent Context) (ctx Context, cancel CancelFunc) {
+	ctx, f := context.WithCancel(parent)
+	return ctx, CancelFunc(f)
+}
+
+// WithDeadline returns a copy of the parent context with the deadline adjusted
+// to be no later than d. If the parent's deadline is already earlier than d,
+// WithDeadline(parent, d) is semantically equivalent to parent. The returned
+// context's Done channel is closed when the deadline expires, when the returned
+// cancel function is called, or when the parent context's Done channel is
+// closed, whichever happens first.
+//
+// Canceling this context releases resources associated with it, so code should
+// call cancel as soon as the operations running in this Context complete.
+func WithDeadline(parent Context, deadline time.Time) (Context, CancelFunc) {
+	ctx, f := context.WithDeadline(parent, deadline)
+	return ctx, CancelFunc(f)
+}
+
+// WithTimeout returns WithDeadline(parent, time.Now().Add(timeout)).
+//
+// Canceling this context releases resources associated with it, so code should
+// call cancel as soon as the operations running in this Context complete:
+//
+// 	func slowOperationWithTimeout(ctx context.Context) (Result, error) {
+// 		ctx, cancel := context.WithTimeout(ctx, 100*time.Millisecond)
+// 		defer cancel()  // releases resources if slowOperation completes before timeout elapses
+// 		return slowOperation(ctx)
+// 	}
+func WithTimeout(parent Context, timeout time.Duration) (Context, CancelFunc) {
+	return WithDeadline(parent, time.Now().Add(timeout))
+}
+
+// WithValue returns a copy of parent in which the value associated with key is
+// val.
+//
+// Use context Values only for request-scoped data that transits processes and
+// APIs, not for passing optional parameters to functions.
+func WithValue(parent Context, key interface{}, val interface{}) Context {
+	return context.WithValue(parent, key, val)
+}

vendor/golang.org/x/net/context/go19.go

@@ -0,0 +1,21 @@
+// Copyright 2017 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build go1.9
+// +build go1.9
+
+package context
+
+import "context" // standard library's context, as of Go 1.7
+
+// A Context carries a deadline, a cancelation signal, and other values across
+// API boundaries.
+//
+// Context's methods may be called by multiple goroutines simultaneously.
+type Context = context.Context
+
+// A CancelFunc tells an operation to abandon its work.
+// A CancelFunc does not wait for the work to stop.
+// After the first call, subsequent calls to a CancelFunc do nothing.
+type CancelFunc = context.CancelFunc

vendor/golang.org/x/net/context/pre_go17.go

@@ -0,0 +1,301 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build !go1.7
+// +build !go1.7
+
+package context
+
+import (
+	"errors"
+	"fmt"
+	"sync"
+	"time"
+)
+
+// An emptyCtx is never canceled, has no values, and has no deadline. It is not
+// struct{}, since vars of this type must have distinct addresses.
+type emptyCtx int
+
+func (*emptyCtx) Deadline() (deadline time.Time, ok bool) {
+	return
+}
+
+func (*emptyCtx) Done() <-chan struct{} {
+	return nil
+}
+
+func (*emptyCtx) Err() error {
+	return nil
+}
+
+func (*emptyCtx) Value(key interface{}) interface{} {
+	return nil
+}
+
+func (e *emptyCtx) String() string {
+	switch e {
+	case background:
+		return "context.Background"
+	case todo:
+		return "context.TODO"
+	}
+	return "unknown empty Context"
+}
+
+var (
+	background = new(emptyCtx)
+	todo       = new(emptyCtx)
+)
+
+// Canceled is the error returned by Context.Err when the context is canceled.
+var Canceled = errors.New("context canceled")
+
+// DeadlineExceeded is the error returned by Context.Err when the context's
+// deadline passes.
+var DeadlineExceeded = errors.New("context deadline exceeded")
+
+// WithCancel returns a copy of parent with a new Done channel. The returned
+// context's Done channel is closed when the returned cancel function is called
+// or when the parent context's Done channel is closed, whichever happens first.
+//
+// Canceling this context releases resources associated with it, so code should
+// call cancel as soon as the operations running in this Context complete.
+func WithCancel(parent Context) (ctx Context, cancel CancelFunc) {
+	c := newCancelCtx(parent)
+	propagateCancel(parent, c)
+	return c, func() { c.cancel(true, Canceled) }
+}
+
+// newCancelCtx returns an initialized cancelCtx.
+func newCancelCtx(parent Context) *cancelCtx {
+	return &cancelCtx{
+		Context: parent,
+		done:    make(chan struct{}),
+	}
+}
+
+// propagateCancel arranges for child to be canceled when parent is.
+func propagateCancel(parent Context, child canceler) {
+	if parent.Done() == nil {
+		return // parent is never canceled
+	}
+	if p, ok := parentCancelCtx(parent); ok {
+		p.mu.Lock()
+		if p.err != nil {
+			// parent has already been canceled
+			child.cancel(false, p.err)
+		} else {
+			if p.children == nil {
+				p.children = make(map[canceler]bool)
+			}
+			p.children[child] = true
+		}
+		p.mu.Unlock()
+	} else {
+		go func() {
+			select {
+			case <-parent.Done():
+				child.cancel(false, parent.Err())
+			case <-child.Done():
+			}
+		}()
+	}
+}
+
+// parentCancelCtx follows a chain of parent references until it finds a
+// *cancelCtx. This function understands how each of the concrete types in this
+// package represents its parent.
+func parentCancelCtx(parent Context) (*cancelCtx, bool) {
+	for {
+		switch c := parent.(type) {
+		case *cancelCtx:
+			return c, true
+		case *timerCtx:
+			return c.cancelCtx, true
+		case *valueCtx:
+			parent = c.Context
+		default:
+			return nil, false
+		}
+	}
+}
+
+// removeChild removes a context from its parent.
+func removeChild(parent Context, child canceler) {
+	p, ok := parentCancelCtx(parent)
+	if !ok {
+		return
+	}
+	p.mu.Lock()
+	if p.children != nil {
+		delete(p.children, child)
+	}
+	p.mu.Unlock()
+}
+
+// A canceler is a context type that can be canceled directly. The
+// implementations are *cancelCtx and *timerCtx.
+type canceler interface {
+	cancel(removeFromParent bool, err error)
+	Done() <-chan struct{}
+}
+
+// A cancelCtx can be canceled. When canceled, it also cancels any children
+// that implement canceler.
+type cancelCtx struct {
+	Context
+
+	done chan struct{} // closed by the first cancel call.
+
+	mu       sync.Mutex
+	children map[canceler]bool // set to nil by the first cancel call
+	err      error             // set to non-nil by the first cancel call
+}
+
+func (c *cancelCtx) Done() <-chan struct{} {
+	return c.done
+}
+
+func (c *cancelCtx) Err() error {
+	c.mu.Lock()
+	defer c.mu.Unlock()
+	return c.err
+}
+
+func (c *cancelCtx) String() string {
+	return fmt.Sprintf("%v.WithCancel", c.Context)
+}
+
+// cancel closes c.done, cancels each of c's children, and, if
+// removeFromParent is true, removes c from its parent's children.
+func (c *cancelCtx) cancel(removeFromParent bool, err error) {
+	if err == nil {
+		panic("context: internal error: missing cancel error")
+	}
+	c.mu.Lock()
+	if c.err != nil {
+		c.mu.Unlock()
+		return // already canceled
+	}
+	c.err = err
+	close(c.done)
+	for child := range c.children {
+		// NOTE: acquiring the child's lock while holding parent's lock.
+		child.cancel(false, err)
+	}
+	c.children = nil
+	c.mu.Unlock()
+
+	if removeFromParent {
+		removeChild(c.Context, c)
+	}
+}
+
+// WithDeadline returns a copy of the parent context with the deadline adjusted
+// to be no later than d. If the parent's deadline is already earlier than d,
+// WithDeadline(parent, d) is semantically equivalent to parent. The returned
+// context's Done channel is closed when the deadline expires, when the returned
+// cancel function is called, or when the parent context's Done channel is
+// closed, whichever happens first.
+//
+// Canceling this context releases resources associated with it, so code should
+// call cancel as soon as the operations running in this Context complete.
+func WithDeadline(parent Context, deadline time.Time) (Context, CancelFunc) {
+	if cur, ok := parent.Deadline(); ok && cur.Before(deadline) {
+		// The current deadline is already sooner than the new one.
+		return WithCancel(parent)
+	}
+	c := &timerCtx{
+		cancelCtx: newCancelCtx(parent),
+		deadline:  deadline,
+	}
+	propagateCancel(parent, c)
+	d := deadline.Sub(time.Now())
+	if d <= 0 {
+		c.cancel(true, DeadlineExceeded) // deadline has already passed
+		return c, func() { c.cancel(true, Canceled) }
+	}
+	c.mu.Lock()
+	defer c.mu.Unlock()
+	if c.err == nil {
+		c.timer = time.AfterFunc(d, func() {
+			c.cancel(true, DeadlineExceeded)
+		})
+	}
+	return c, func() { c.cancel(true, Canceled) }
+}
+
+// A timerCtx carries a timer and a deadline. It embeds a cancelCtx to
+// implement Done and Err. It implements cancel by stopping its timer then
+// delegating to cancelCtx.cancel.
+type timerCtx struct {
+	*cancelCtx
+	timer *time.Timer // Under cancelCtx.mu.
+
+	deadline time.Time
+}
+
+func (c *timerCtx) Deadline() (deadline time.Time, ok bool) {
+	return c.deadline, true
+}
+
+func (c *timerCtx) String() string {
+	return fmt.Sprintf("%v.WithDeadline(%s [%s])", c.cancelCtx.Context, c.deadline, c.deadline.Sub(time.Now()))
+}
+
+func (c *timerCtx) cancel(removeFromParent bool, err error) {
+	c.cancelCtx.cancel(false, err)
+	if removeFromParent {
+		// Remove this timerCtx from its parent cancelCtx's children.
+		removeChild(c.cancelCtx.Context, c)
+	}
+	c.mu.Lock()
+	if c.timer != nil {
+		c.timer.Stop()
+		c.timer = nil
+	}
+	c.mu.Unlock()
+}
+
+// WithTimeout returns WithDeadline(parent, time.Now().Add(timeout)).
+//
+// Canceling this context releases resources associated with it, so code should
+// call cancel as soon as the operations running in this Context complete:
+//
+// 	func slowOperationWithTimeout(ctx context.Context) (Result, error) {
+// 		ctx, cancel := context.WithTimeout(ctx, 100*time.Millisecond)
+// 		defer cancel()  // releases resources if slowOperation completes before timeout elapses
+// 		return slowOperation(ctx)
+// 	}
+func WithTimeout(parent Context, timeout time.Duration) (Context, CancelFunc) {
+	return WithDeadline(parent, time.Now().Add(timeout))
+}
+
+// WithValue returns a copy of parent in which the value associated with key is
+// val.
+//
+// Use context Values only for request-scoped data that transits processes and
+// APIs, not for passing optional parameters to functions.
+func WithValue(parent Context, key interface{}, val interface{}) Context {
+	return &valueCtx{parent, key, val}
+}
+
+// A valueCtx carries a key-value pair. It implements Value for that key and
+// delegates all other calls to the embedded Context.
+type valueCtx struct {
+	Context
+	key, val interface{}
+}
+
+func (c *valueCtx) String() string {
+	return fmt.Sprintf("%v.WithValue(%#v, %#v)", c.Context, c.key, c.val)
+}
+
+func (c *valueCtx) Value(key interface{}) interface{} {
+	if c.key == key {
+		return c.val
+	}
+	return c.Context.Value(key)
+}

vendor/golang.org/x/net/context/pre_go19.go

@@ -0,0 +1,110 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build !go1.9
+// +build !go1.9
+
+package context
+
+import "time"
+
+// A Context carries a deadline, a cancelation signal, and other values across
+// API boundaries.
+//
+// Context's methods may be called by multiple goroutines simultaneously.
+type Context interface {
+	// Deadline returns the time when work done on behalf of this context
+	// should be canceled. Deadline returns ok==false when no deadline is
+	// set. Successive calls to Deadline return the same results.
+	Deadline() (deadline time.Time, ok bool)
+
+	// Done returns a channel that's closed when work done on behalf of this
+	// context should be canceled. Done may return nil if this context can
+	// never be canceled. Successive calls to Done return the same value.
+	//
+	// WithCancel arranges for Done to be closed when cancel is called;
+	// WithDeadline arranges for Done to be closed when the deadline
+	// expires; WithTimeout arranges for Done to be closed when the timeout
+	// elapses.
+	//
+	// Done is provided for use in select statements:
+	//
+	//  // Stream generates values with DoSomething and sends them to out
+	//  // until DoSomething returns an error or ctx.Done is closed.
+	//  func Stream(ctx context.Context, out chan<- Value) error {
+	//  	for {
+	//  		v, err := DoSomething(ctx)
+	//  		if err != nil {
+	//  			return err
+	//  		}
+	//  		select {
+	//  		case <-ctx.Done():
+	//  			return ctx.Err()
+	//  		case out <- v:
+	//  		}
+	//  	}
+	//  }
+	//
+	// See http://blog.golang.org/pipelines for more examples of how to use
+	// a Done channel for cancelation.
+	Done() <-chan struct{}
+
+	// Err returns a non-nil error value after Done is closed. Err returns
+	// Canceled if the context was canceled or DeadlineExceeded if the
+	// context's deadline passed. No other values for Err are defined.
+	// After Done is closed, successive calls to Err return the same value.
+	Err() error
+
+	// Value returns the value associated with this context for key, or nil
+	// if no value is associated with key. Successive calls to Value with
+	// the same key returns the same result.
+	//
+	// Use context values only for request-scoped data that transits
+	// processes and API boundaries, not for passing optional parameters to
+	// functions.
+	//
+	// A key identifies a specific value in a Context. Functions that wish
+	// to store values in Context typically allocate a key in a global
+	// variable then use that key as the argument to context.WithValue and
+	// Context.Value. A key can be any type that supports equality;
+	// packages should define keys as an unexported type to avoid
+	// collisions.
+	//
+	// Packages that define a Context key should provide type-safe accessors
+	// for the values stores using that key:
+	//
+	// 	// Package user defines a User type that's stored in Contexts.
+	// 	package user
+	//
+	// 	import "golang.org/x/net/context"
+	//
+	// 	// User is the type of value stored in the Contexts.
+	// 	type User struct {...}
+	//
+	// 	// key is an unexported type for keys defined in this package.
+	// 	// This prevents collisions with keys defined in other packages.
+	// 	type key int
+	//
+	// 	// userKey is the key for user.User values in Contexts. It is
+	// 	// unexported; clients use user.NewContext and user.FromContext
+	// 	// instead of using this key directly.
+	// 	var userKey key = 0
+	//
+	// 	// NewContext returns a new Context that carries value u.
+	// 	func NewContext(ctx context.Context, u *User) context.Context {
+	// 		return context.WithValue(ctx, userKey, u)
+	// 	}
+	//
+	// 	// FromContext returns the User value stored in ctx, if any.
+	// 	func FromContext(ctx context.Context) (*User, bool) {
+	// 		u, ok := ctx.Value(userKey).(*User)
+	// 		return u, ok
+	// 	}
+	Value(key interface{}) interface{}
+}
+
+// A CancelFunc tells an operation to abandon its work.
+// A CancelFunc does not wait for the work to stop.
+// After the first call, subsequent calls to a CancelFunc do nothing.
+type CancelFunc func()

vendor/golang.org/x/oauth2/.travis.yml

@@ -0,0 +1,13 @@
+language: go
+
+go:
+  - tip
+
+install:
+  - export GOPATH="$HOME/gopath"
+  - mkdir -p "$GOPATH/src/golang.org/x"
+  - mv "$TRAVIS_BUILD_DIR" "$GOPATH/src/golang.org/x/oauth2"
+  - go get -v -t -d golang.org/x/oauth2/...
+
+script:
+  - go test -v golang.org/x/oauth2/...

vendor/golang.org/x/oauth2/AUTHORS

@@ -0,0 +1,3 @@
+# This source code refers to The Go Authors for copyright purposes.
+# The master list of authors is in the main Go distribution,
+# visible at http://tip.golang.org/AUTHORS.

vendor/golang.org/x/oauth2/CONTRIBUTING.md

@@ -0,0 +1,26 @@
+# Contributing to Go
+
+Go is an open source project.
+
+It is the work of hundreds of contributors. We appreciate your help!
+
+## Filing issues
+
+When [filing an issue](https://github.com/golang/oauth2/issues), make sure to answer these five questions:
+
+1.  What version of Go are you using (`go version`)?
+2.  What operating system and processor architecture are you using?
+3.  What did you do?
+4.  What did you expect to see?
+5.  What did you see instead?
+
+General questions should go to the [golang-nuts mailing list](https://groups.google.com/group/golang-nuts) instead of the issue tracker.
+The gophers there will answer or ask you to file an issue if you've tripped over a bug.
+
+## Contributing code
+
+Please read the [Contribution Guidelines](https://golang.org/doc/contribute.html)
+before sending patches.
+
+Unless otherwise noted, the Go source files are distributed under
+the BSD-style license found in the LICENSE file.

vendor/golang.org/x/oauth2/CONTRIBUTORS

@@ -0,0 +1,3 @@
+# This source code was written by the Go contributors.
+# The master list of contributors is in the main Go distribution,
+# visible at http://tip.golang.org/CONTRIBUTORS.

vendor/golang.org/x/oauth2/LICENSE

@@ -0,0 +1,27 @@
+Copyright (c) 2009 The Go Authors. All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+   * Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+   * Redistributions in binary form must reproduce the above
+copyright notice, this list of conditions and the following disclaimer
+in the documentation and/or other materials provided with the
+distribution.
+   * Neither the name of Google Inc. nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

vendor/golang.org/x/oauth2/README.md

@@ -0,0 +1,36 @@
+# OAuth2 for Go
+
+[![Go Reference](https://pkg.go.dev/badge/golang.org/x/oauth2.svg)](https://pkg.go.dev/golang.org/x/oauth2)
+[![Build Status](https://travis-ci.org/golang/oauth2.svg?branch=master)](https://travis-ci.org/golang/oauth2)
+
+oauth2 package contains a client implementation for OAuth 2.0 spec.
+
+## Installation
+
+~~~~
+go get golang.org/x/oauth2
+~~~~
+
+Or you can manually git clone the repository to
+`$(go env GOPATH)/src/golang.org/x/oauth2`.
+
+See pkg.go.dev for further documentation and examples.
+
+* [pkg.go.dev/golang.org/x/oauth2](https://pkg.go.dev/golang.org/x/oauth2)
+* [pkg.go.dev/golang.org/x/oauth2/google](https://pkg.go.dev/golang.org/x/oauth2/google)
+
+## Policy for new packages
+
+We no longer accept new provider-specific packages in this repo if all
+they do is add a single endpoint variable. If you just want to add a
+single endpoint, add it to the
+[pkg.go.dev/golang.org/x/oauth2/endpoints](https://pkg.go.dev/golang.org/x/oauth2/endpoints)
+package.
+
+## Report Issues / Send Patches
+
+This repository uses Gerrit for code changes. To learn how to submit changes to
+this repository, see https://golang.org/doc/contribute.html.
+
+The main issue tracker for the oauth2 repository is located at
+https://github.com/golang/oauth2/issues.

vendor/golang.org/x/oauth2/internal/client_appengine.go

@@ -0,0 +1,14 @@
+// Copyright 2018 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build appengine
+// +build appengine
+
+package internal
+
+import "google.golang.org/appengine/urlfetch"
+
+func init() {
+	appengineClientHook = urlfetch.Client
+}

vendor/golang.org/x/oauth2/internal/doc.go

@@ -0,0 +1,6 @@
+// Copyright 2017 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package internal contains support packages for oauth2 package.
+package internal

vendor/golang.org/x/oauth2/internal/oauth2.go

@@ -0,0 +1,37 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package internal
+
+import (
+	"crypto/rsa"
+	"crypto/x509"
+	"encoding/pem"
+	"errors"
+	"fmt"
+)
+
+// ParseKey converts the binary contents of a private key file
+// to an *rsa.PrivateKey. It detects whether the private key is in a
+// PEM container or not. If so, it extracts the the private key
+// from PEM container before conversion. It only supports PEM
+// containers with no passphrase.
+func ParseKey(key []byte) (*rsa.PrivateKey, error) {
+	block, _ := pem.Decode(key)
+	if block != nil {
+		key = block.Bytes
+	}
+	parsedKey, err := x509.ParsePKCS8PrivateKey(key)
+	if err != nil {
+		parsedKey, err = x509.ParsePKCS1PrivateKey(key)
+		if err != nil {
+			return nil, fmt.Errorf("private key should be a PEM or plain PKCS1 or PKCS8; parse error: %v", err)
+		}
+	}
+	parsed, ok := parsedKey.(*rsa.PrivateKey)
+	if !ok {
+		return nil, errors.New("private key is invalid")
+	}
+	return parsed, nil
+}

vendor/golang.org/x/oauth2/internal/token.go

@@ -0,0 +1,294 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package internal
+
+import (
+	"context"
+	"encoding/json"
+	"errors"
+	"fmt"
+	"io"
+	"io/ioutil"
+	"math"
+	"mime"
+	"net/http"
+	"net/url"
+	"strconv"
+	"strings"
+	"sync"
+	"time"
+
+	"golang.org/x/net/context/ctxhttp"
+)
+
+// Token represents the credentials used to authorize
+// the requests to access protected resources on the OAuth 2.0
+// provider's backend.
+//
+// This type is a mirror of oauth2.Token and exists to break
+// an otherwise-circular dependency. Other internal packages
+// should convert this Token into an oauth2.Token before use.
+type Token struct {
+	// AccessToken is the token that authorizes and authenticates
+	// the requests.
+	AccessToken string
+
+	// TokenType is the type of token.
+	// The Type method returns either this or "Bearer", the default.
+	TokenType string
+
+	// RefreshToken is a token that's used by the application
+	// (as opposed to the user) to refresh the access token
+	// if it expires.
+	RefreshToken string
+
+	// Expiry is the optional expiration time of the access token.
+	//
+	// If zero, TokenSource implementations will reuse the same
+	// token forever and RefreshToken or equivalent
+	// mechanisms for that TokenSource will not be used.
+	Expiry time.Time
+
+	// Raw optionally contains extra metadata from the server
+	// when updating a token.
+	Raw interface{}
+}
+
+// tokenJSON is the struct representing the HTTP response from OAuth2
+// providers returning a token in JSON form.
+type tokenJSON struct {
+	AccessToken  string         `json:"access_token"`
+	TokenType    string         `json:"token_type"`
+	RefreshToken string         `json:"refresh_token"`
+	ExpiresIn    expirationTime `json:"expires_in"` // at least PayPal returns string, while most return number
+}
+
+func (e *tokenJSON) expiry() (t time.Time) {
+	if v := e.ExpiresIn; v != 0 {
+		return time.Now().Add(time.Duration(v) * time.Second)
+	}
+	return
+}
+
+type expirationTime int32
+
+func (e *expirationTime) UnmarshalJSON(b []byte) error {
+	if len(b) == 0 || string(b) == "null" {
+		return nil
+	}
+	var n json.Number
+	err := json.Unmarshal(b, &n)
+	if err != nil {
+		return err
+	}
+	i, err := n.Int64()
+	if err != nil {
+		return err
+	}
+	if i > math.MaxInt32 {
+		i = math.MaxInt32
+	}
+	*e = expirationTime(i)
+	return nil
+}
+
+// RegisterBrokenAuthHeaderProvider previously did something. It is now a no-op.
+//
+// Deprecated: this function no longer does anything. Caller code that
+// wants to avoid potential extra HTTP requests made during
+// auto-probing of the provider's auth style should set
+// Endpoint.AuthStyle.
+func RegisterBrokenAuthHeaderProvider(tokenURL string) {}
+
+// AuthStyle is a copy of the golang.org/x/oauth2 package's AuthStyle type.
+type AuthStyle int
+
+const (
+	AuthStyleUnknown  AuthStyle = 0
+	AuthStyleInParams AuthStyle = 1
+	AuthStyleInHeader AuthStyle = 2
+)
+
+// authStyleCache is the set of tokenURLs we've successfully used via
+// RetrieveToken and which style auth we ended up using.
+// It's called a cache, but it doesn't (yet?) shrink. It's expected that
+// the set of OAuth2 servers a program contacts over time is fixed and
+// small.
+var authStyleCache struct {
+	sync.Mutex
+	m map[string]AuthStyle // keyed by tokenURL
+}
+
+// ResetAuthCache resets the global authentication style cache used
+// for AuthStyleUnknown token requests.
+func ResetAuthCache() {
+	authStyleCache.Lock()
+	defer authStyleCache.Unlock()
+	authStyleCache.m = nil
+}
+
+// lookupAuthStyle reports which auth style we last used with tokenURL
+// when calling RetrieveToken and whether we have ever done so.
+func lookupAuthStyle(tokenURL string) (style AuthStyle, ok bool) {
+	authStyleCache.Lock()
+	defer authStyleCache.Unlock()
+	style, ok = authStyleCache.m[tokenURL]
+	return
+}
+
+// setAuthStyle adds an entry to authStyleCache, documented above.
+func setAuthStyle(tokenURL string, v AuthStyle) {
+	authStyleCache.Lock()
+	defer authStyleCache.Unlock()
+	if authStyleCache.m == nil {
+		authStyleCache.m = make(map[string]AuthStyle)
+	}
+	authStyleCache.m[tokenURL] = v
+}
+
+// newTokenRequest returns a new *http.Request to retrieve a new token
+// from tokenURL using the provided clientID, clientSecret, and POST
+// body parameters.
+//
+// inParams is whether the clientID & clientSecret should be encoded
+// as the POST body. An 'inParams' value of true means to send it in
+// the POST body (along with any values in v); false means to send it
+// in the Authorization header.
+func newTokenRequest(tokenURL, clientID, clientSecret string, v url.Values, authStyle AuthStyle) (*http.Request, error) {
+	if authStyle == AuthStyleInParams {
+		v = cloneURLValues(v)
+		if clientID != "" {
+			v.Set("client_id", clientID)
+		}
+		if clientSecret != "" {
+			v.Set("client_secret", clientSecret)
+		}
+	}
+	req, err := http.NewRequest("POST", tokenURL, strings.NewReader(v.Encode()))
+	if err != nil {
+		return nil, err
+	}
+	req.Header.Set("Content-Type", "application/x-www-form-urlencoded")
+	if authStyle == AuthStyleInHeader {
+		req.SetBasicAuth(url.QueryEscape(clientID), url.QueryEscape(clientSecret))
+	}
+	return req, nil
+}
+
+func cloneURLValues(v url.Values) url.Values {
+	v2 := make(url.Values, len(v))
+	for k, vv := range v {
+		v2[k] = append([]string(nil), vv...)
+	}
+	return v2
+}
+
+func RetrieveToken(ctx context.Context, clientID, clientSecret, tokenURL string, v url.Values, authStyle AuthStyle) (*Token, error) {
+	needsAuthStyleProbe := authStyle == 0
+	if needsAuthStyleProbe {
+		if style, ok := lookupAuthStyle(tokenURL); ok {
+			authStyle = style
+			needsAuthStyleProbe = false
+		} else {
+			authStyle = AuthStyleInHeader // the first way we'll try
+		}
+	}
+	req, err := newTokenRequest(tokenURL, clientID, clientSecret, v, authStyle)
+	if err != nil {
+		return nil, err
+	}
+	token, err := doTokenRoundTrip(ctx, req)
+	if err != nil && needsAuthStyleProbe {
+		// If we get an error, assume the server wants the
+		// clientID & clientSecret in a different form.
+		// See https://code.google.com/p/goauth2/issues/detail?id=31 for background.
+		// In summary:
+		// - Reddit only accepts client secret in the Authorization header
+		// - Dropbox accepts either it in URL param or Auth header, but not both.
+		// - Google only accepts URL param (not spec compliant?), not Auth header
+		// - Stripe only accepts client secret in Auth header with Bearer method, not Basic
+		//
+		// We used to maintain a big table in this code of all the sites and which way
+		// they went, but maintaining it didn't scale & got annoying.
+		// So just try both ways.
+		authStyle = AuthStyleInParams // the second way we'll try
+		req, _ = newTokenRequest(tokenURL, clientID, clientSecret, v, authStyle)
+		token, err = doTokenRoundTrip(ctx, req)
+	}
+	if needsAuthStyleProbe && err == nil {
+		setAuthStyle(tokenURL, authStyle)
+	}
+	// Don't overwrite `RefreshToken` with an empty value
+	// if this was a token refreshing request.
+	if token != nil && token.RefreshToken == "" {
+		token.RefreshToken = v.Get("refresh_token")
+	}
+	return token, err
+}
+
+func doTokenRoundTrip(ctx context.Context, req *http.Request) (*Token, error) {
+	r, err := ctxhttp.Do(ctx, ContextClient(ctx), req)
+	if err != nil {
+		return nil, err
+	}
+	body, err := ioutil.ReadAll(io.LimitReader(r.Body, 1<<20))
+	r.Body.Close()
+	if err != nil {
+		return nil, fmt.Errorf("oauth2: cannot fetch token: %v", err)
+	}
+	if code := r.StatusCode; code < 200 || code > 299 {
+		return nil, &RetrieveError{
+			Response: r,
+			Body:     body,
+		}
+	}
+
+	var token *Token
+	content, _, _ := mime.ParseMediaType(r.Header.Get("Content-Type"))
+	switch content {
+	case "application/x-www-form-urlencoded", "text/plain":
+		vals, err := url.ParseQuery(string(body))
+		if err != nil {
+			return nil, err
+		}
+		token = &Token{
+			AccessToken:  vals.Get("access_token"),
+			TokenType:    vals.Get("token_type"),
+			RefreshToken: vals.Get("refresh_token"),
+			Raw:          vals,
+		}
+		e := vals.Get("expires_in")
+		expires, _ := strconv.Atoi(e)
+		if expires != 0 {
+			token.Expiry = time.Now().Add(time.Duration(expires) * time.Second)
+		}
+	default:
+		var tj tokenJSON
+		if err = json.Unmarshal(body, &tj); err != nil {
+			return nil, err
+		}
+		token = &Token{
+			AccessToken:  tj.AccessToken,
+			TokenType:    tj.TokenType,
+			RefreshToken: tj.RefreshToken,
+			Expiry:       tj.expiry(),
+			Raw:          make(map[string]interface{}),
+		}
+		json.Unmarshal(body, &token.Raw) // no error checks for optional fields
+	}
+	if token.AccessToken == "" {
+		return nil, errors.New("oauth2: server response missing access_token")
+	}
+	return token, nil
+}
+
+type RetrieveError struct {
+	Response *http.Response
+	Body     []byte
+}
+
+func (r *RetrieveError) Error() string {
+	return fmt.Sprintf("oauth2: cannot fetch token: %v\nResponse: %s", r.Response.Status, r.Body)
+}

vendor/golang.org/x/oauth2/internal/transport.go

@@ -0,0 +1,33 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package internal
+
+import (
+	"context"
+	"net/http"
+)
+
+// HTTPClient is the context key to use with golang.org/x/net/context's
+// WithValue function to associate an *http.Client value with a context.
+var HTTPClient ContextKey
+
+// ContextKey is just an empty struct. It exists so HTTPClient can be
+// an immutable public variable with a unique type. It's immutable
+// because nobody else can create a ContextKey, being unexported.
+type ContextKey struct{}
+
+var appengineClientHook func(context.Context) *http.Client
+
+func ContextClient(ctx context.Context) *http.Client {
+	if ctx != nil {
+		if hc, ok := ctx.Value(HTTPClient).(*http.Client); ok {
+			return hc
+		}
+	}
+	if appengineClientHook != nil {
+		return appengineClientHook(ctx)
+	}
+	return http.DefaultClient
+}

vendor/golang.org/x/oauth2/oauth2.go

@@ -0,0 +1,381 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package oauth2 provides support for making
+// OAuth2 authorized and authenticated HTTP requests,
+// as specified in RFC 6749.
+// It can additionally grant authorization with Bearer JWT.
+package oauth2 // import "golang.org/x/oauth2"
+
+import (
+	"bytes"
+	"context"
+	"errors"
+	"net/http"
+	"net/url"
+	"strings"
+	"sync"
+
+	"golang.org/x/oauth2/internal"
+)
+
+// NoContext is the default context you should supply if not using
+// your own context.Context (see https://golang.org/x/net/context).
+//
+// Deprecated: Use context.Background() or context.TODO() instead.
+var NoContext = context.TODO()
+
+// RegisterBrokenAuthHeaderProvider previously did something. It is now a no-op.
+//
+// Deprecated: this function no longer does anything. Caller code that
+// wants to avoid potential extra HTTP requests made during
+// auto-probing of the provider's auth style should set
+// Endpoint.AuthStyle.
+func RegisterBrokenAuthHeaderProvider(tokenURL string) {}
+
+// Config describes a typical 3-legged OAuth2 flow, with both the
+// client application information and the server's endpoint URLs.
+// For the client credentials 2-legged OAuth2 flow, see the clientcredentials
+// package (https://golang.org/x/oauth2/clientcredentials).
+type Config struct {
+	// ClientID is the application's ID.
+	ClientID string
+
+	// ClientSecret is the application's secret.
+	ClientSecret string
+
+	// Endpoint contains the resource server's token endpoint
+	// URLs. These are constants specific to each server and are
+	// often available via site-specific packages, such as
+	// google.Endpoint or github.Endpoint.
+	Endpoint Endpoint
+
+	// RedirectURL is the URL to redirect users going through
+	// the OAuth flow, after the resource owner's URLs.
+	RedirectURL string
+
+	// Scope specifies optional requested permissions.
+	Scopes []string
+}
+
+// A TokenSource is anything that can return a token.
+type TokenSource interface {
+	// Token returns a token or an error.
+	// Token must be safe for concurrent use by multiple goroutines.
+	// The returned Token must not be modified.
+	Token() (*Token, error)
+}
+
+// Endpoint represents an OAuth 2.0 provider's authorization and token
+// endpoint URLs.
+type Endpoint struct {
+	AuthURL  string
+	TokenURL string
+
+	// AuthStyle optionally specifies how the endpoint wants the
+	// client ID & client secret sent. The zero value means to
+	// auto-detect.
+	AuthStyle AuthStyle
+}
+
+// AuthStyle represents how requests for tokens are authenticated
+// to the server.
+type AuthStyle int
+
+const (
+	// AuthStyleAutoDetect means to auto-detect which authentication
+	// style the provider wants by trying both ways and caching
+	// the successful way for the future.
+	AuthStyleAutoDetect AuthStyle = 0
+
+	// AuthStyleInParams sends the "client_id" and "client_secret"
+	// in the POST body as application/x-www-form-urlencoded parameters.
+	AuthStyleInParams AuthStyle = 1
+
+	// AuthStyleInHeader sends the client_id and client_password
+	// using HTTP Basic Authorization. This is an optional style
+	// described in the OAuth2 RFC 6749 section 2.3.1.
+	AuthStyleInHeader AuthStyle = 2
+)
+
+var (
+	// AccessTypeOnline and AccessTypeOffline are options passed
+	// to the Options.AuthCodeURL method. They modify the
+	// "access_type" field that gets sent in the URL returned by
+	// AuthCodeURL.
+	//
+	// Online is the default if neither is specified. If your
+	// application needs to refresh access tokens when the user
+	// is not present at the browser, then use offline. This will
+	// result in your application obtaining a refresh token the
+	// first time your application exchanges an authorization
+	// code for a user.
+	AccessTypeOnline  AuthCodeOption = SetAuthURLParam("access_type", "online")
+	AccessTypeOffline AuthCodeOption = SetAuthURLParam("access_type", "offline")
+
+	// ApprovalForce forces the users to view the consent dialog
+	// and confirm the permissions request at the URL returned
+	// from AuthCodeURL, even if they've already done so.
+	ApprovalForce AuthCodeOption = SetAuthURLParam("prompt", "consent")
+)
+
+// An AuthCodeOption is passed to Config.AuthCodeURL.
+type AuthCodeOption interface {
+	setValue(url.Values)
+}
+
+type setParam struct{ k, v string }
+
+func (p setParam) setValue(m url.Values) { m.Set(p.k, p.v) }
+
+// SetAuthURLParam builds an AuthCodeOption which passes key/value parameters
+// to a provider's authorization endpoint.
+func SetAuthURLParam(key, value string) AuthCodeOption {
+	return setParam{key, value}
+}
+
+// AuthCodeURL returns a URL to OAuth 2.0 provider's consent page
+// that asks for permissions for the required scopes explicitly.
+//
+// State is a token to protect the user from CSRF attacks. You must
+// always provide a non-empty string and validate that it matches the
+// the state query parameter on your redirect callback.
+// See http://tools.ietf.org/html/rfc6749#section-10.12 for more info.
+//
+// Opts may include AccessTypeOnline or AccessTypeOffline, as well
+// as ApprovalForce.
+// It can also be used to pass the PKCE challenge.
+// See https://www.oauth.com/oauth2-servers/pkce/ for more info.
+func (c *Config) AuthCodeURL(state string, opts ...AuthCodeOption) string {
+	var buf bytes.Buffer
+	buf.WriteString(c.Endpoint.AuthURL)
+	v := url.Values{
+		"response_type": {"code"},
+		"client_id":     {c.ClientID},
+	}
+	if c.RedirectURL != "" {
+		v.Set("redirect_uri", c.RedirectURL)
+	}
+	if len(c.Scopes) > 0 {
+		v.Set("scope", strings.Join(c.Scopes, " "))
+	}
+	if state != "" {
+		// TODO(light): Docs say never to omit state; don't allow empty.
+		v.Set("state", state)
+	}
+	for _, opt := range opts {
+		opt.setValue(v)
+	}
+	if strings.Contains(c.Endpoint.AuthURL, "?") {
+		buf.WriteByte('&')
+	} else {
+		buf.WriteByte('?')
+	}
+	buf.WriteString(v.Encode())
+	return buf.String()
+}
+
+// PasswordCredentialsToken converts a resource owner username and password
+// pair into a token.
+//
+// Per the RFC, this grant type should only be used "when there is a high
+// degree of trust between the resource owner and the client (e.g., the client
+// is part of the device operating system or a highly privileged application),
+// and when other authorization grant types are not available."
+// See https://tools.ietf.org/html/rfc6749#section-4.3 for more info.
+//
+// The provided context optionally controls which HTTP client is used. See the HTTPClient variable.
+func (c *Config) PasswordCredentialsToken(ctx context.Context, username, password string) (*Token, error) {
+	v := url.Values{
+		"grant_type": {"password"},
+		"username":   {username},
+		"password":   {password},
+	}
+	if len(c.Scopes) > 0 {
+		v.Set("scope", strings.Join(c.Scopes, " "))
+	}
+	return retrieveToken(ctx, c, v)
+}
+
+// Exchange converts an authorization code into a token.
+//
+// It is used after a resource provider redirects the user back
+// to the Redirect URI (the URL obtained from AuthCodeURL).
+//
+// The provided context optionally controls which HTTP client is used. See the HTTPClient variable.
+//
+// The code will be in the *http.Request.FormValue("code"). Before
+// calling Exchange, be sure to validate FormValue("state").
+//
+// Opts may include the PKCE verifier code if previously used in AuthCodeURL.
+// See https://www.oauth.com/oauth2-servers/pkce/ for more info.
+func (c *Config) Exchange(ctx context.Context, code string, opts ...AuthCodeOption) (*Token, error) {
+	v := url.Values{
+		"grant_type": {"authorization_code"},
+		"code":       {code},
+	}
+	if c.RedirectURL != "" {
+		v.Set("redirect_uri", c.RedirectURL)
+	}
+	for _, opt := range opts {
+		opt.setValue(v)
+	}
+	return retrieveToken(ctx, c, v)
+}
+
+// Client returns an HTTP client using the provided token.
+// The token will auto-refresh as necessary. The underlying
+// HTTP transport will be obtained using the provided context.
+// The returned client and its Transport should not be modified.
+func (c *Config) Client(ctx context.Context, t *Token) *http.Client {
+	return NewClient(ctx, c.TokenSource(ctx, t))
+}
+
+// TokenSource returns a TokenSource that returns t until t expires,
+// automatically refreshing it as necessary using the provided context.
+//
+// Most users will use Config.Client instead.
+func (c *Config) TokenSource(ctx context.Context, t *Token) TokenSource {
+	tkr := &tokenRefresher{
+		ctx:  ctx,
+		conf: c,
+	}
+	if t != nil {
+		tkr.refreshToken = t.RefreshToken
+	}
+	return &reuseTokenSource{
+		t:   t,
+		new: tkr,
+	}
+}
+
+// tokenRefresher is a TokenSource that makes "grant_type"=="refresh_token"
+// HTTP requests to renew a token using a RefreshToken.
+type tokenRefresher struct {
+	ctx          context.Context // used to get HTTP requests
+	conf         *Config
+	refreshToken string
+}
+
+// WARNING: Token is not safe for concurrent access, as it
+// updates the tokenRefresher's refreshToken field.
+// Within this package, it is used by reuseTokenSource which
+// synchronizes calls to this method with its own mutex.
+func (tf *tokenRefresher) Token() (*Token, error) {
+	if tf.refreshToken == "" {
+		return nil, errors.New("oauth2: token expired and refresh token is not set")
+	}
+
+	tk, err := retrieveToken(tf.ctx, tf.conf, url.Values{
+		"grant_type":    {"refresh_token"},
+		"refresh_token": {tf.refreshToken},
+	})
+
+	if err != nil {
+		return nil, err
+	}
+	if tf.refreshToken != tk.RefreshToken {
+		tf.refreshToken = tk.RefreshToken
+	}
+	return tk, err
+}
+
+// reuseTokenSource is a TokenSource that holds a single token in memory
+// and validates its expiry before each call to retrieve it with
+// Token. If it's expired, it will be auto-refreshed using the
+// new TokenSource.
+type reuseTokenSource struct {
+	new TokenSource // called when t is expired.
+
+	mu sync.Mutex // guards t
+	t  *Token
+}
+
+// Token returns the current token if it's still valid, else will
+// refresh the current token (using r.Context for HTTP client
+// information) and return the new one.
+func (s *reuseTokenSource) Token() (*Token, error) {
+	s.mu.Lock()
+	defer s.mu.Unlock()
+	if s.t.Valid() {
+		return s.t, nil
+	}
+	t, err := s.new.Token()
+	if err != nil {
+		return nil, err
+	}
+	s.t = t
+	return t, nil
+}
+
+// StaticTokenSource returns a TokenSource that always returns the same token.
+// Because the provided token t is never refreshed, StaticTokenSource is only
+// useful for tokens that never expire.
+func StaticTokenSource(t *Token) TokenSource {
+	return staticTokenSource{t}
+}
+
+// staticTokenSource is a TokenSource that always returns the same Token.
+type staticTokenSource struct {
+	t *Token
+}
+
+func (s staticTokenSource) Token() (*Token, error) {
+	return s.t, nil
+}
+
+// HTTPClient is the context key to use with golang.org/x/net/context's
+// WithValue function to associate an *http.Client value with a context.
+var HTTPClient internal.ContextKey
+
+// NewClient creates an *http.Client from a Context and TokenSource.
+// The returned client is not valid beyond the lifetime of the context.
+//
+// Note that if a custom *http.Client is provided via the Context it
+// is used only for token acquisition and is not used to configure the
+// *http.Client returned from NewClient.
+//
+// As a special case, if src is nil, a non-OAuth2 client is returned
+// using the provided context. This exists to support related OAuth2
+// packages.
+func NewClient(ctx context.Context, src TokenSource) *http.Client {
+	if src == nil {
+		return internal.ContextClient(ctx)
+	}
+	return &http.Client{
+		Transport: &Transport{
+			Base:   internal.ContextClient(ctx).Transport,
+			Source: ReuseTokenSource(nil, src),
+		},
+	}
+}
+
+// ReuseTokenSource returns a TokenSource which repeatedly returns the
+// same token as long as it's valid, starting with t.
+// When its cached token is invalid, a new token is obtained from src.
+//
+// ReuseTokenSource is typically used to reuse tokens from a cache
+// (such as a file on disk) between runs of a program, rather than
+// obtaining new tokens unnecessarily.
+//
+// The initial token t may be nil, in which case the TokenSource is
+// wrapped in a caching version if it isn't one already. This also
+// means it's always safe to wrap ReuseTokenSource around any other
+// TokenSource without adverse effects.
+func ReuseTokenSource(t *Token, src TokenSource) TokenSource {
+	// Don't wrap a reuseTokenSource in itself. That would work,
+	// but cause an unnecessary number of mutex operations.
+	// Just build the equivalent one.
+	if rt, ok := src.(*reuseTokenSource); ok {
+		if t == nil {
+			// Just use it directly.
+			return rt
+		}
+		src = rt.new
+	}
+	return &reuseTokenSource{
+		t:   t,
+		new: src,
+	}
+}

vendor/golang.org/x/oauth2/token.go

@@ -0,0 +1,178 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package oauth2
+
+import (
+	"context"
+	"fmt"
+	"net/http"
+	"net/url"
+	"strconv"
+	"strings"
+	"time"
+
+	"golang.org/x/oauth2/internal"
+)
+
+// expiryDelta determines how earlier a token should be considered
+// expired than its actual expiration time. It is used to avoid late
+// expirations due to client-server time mismatches.
+const expiryDelta = 10 * time.Second
+
+// Token represents the credentials used to authorize
+// the requests to access protected resources on the OAuth 2.0
+// provider's backend.
+//
+// Most users of this package should not access fields of Token
+// directly. They're exported mostly for use by related packages
+// implementing derivative OAuth2 flows.
+type Token struct {
+	// AccessToken is the token that authorizes and authenticates
+	// the requests.
+	AccessToken string `json:"access_token"`
+
+	// TokenType is the type of token.
+	// The Type method returns either this or "Bearer", the default.
+	TokenType string `json:"token_type,omitempty"`
+
+	// RefreshToken is a token that's used by the application
+	// (as opposed to the user) to refresh the access token
+	// if it expires.
+	RefreshToken string `json:"refresh_token,omitempty"`
+
+	// Expiry is the optional expiration time of the access token.
+	//
+	// If zero, TokenSource implementations will reuse the same
+	// token forever and RefreshToken or equivalent
+	// mechanisms for that TokenSource will not be used.
+	Expiry time.Time `json:"expiry,omitempty"`
+
+	// raw optionally contains extra metadata from the server
+	// when updating a token.
+	raw interface{}
+}
+
+// Type returns t.TokenType if non-empty, else "Bearer".
+func (t *Token) Type() string {
+	if strings.EqualFold(t.TokenType, "bearer") {
+		return "Bearer"
+	}
+	if strings.EqualFold(t.TokenType, "mac") {
+		return "MAC"
+	}
+	if strings.EqualFold(t.TokenType, "basic") {
+		return "Basic"
+	}
+	if t.TokenType != "" {
+		return t.TokenType
+	}
+	return "Bearer"
+}
+
+// SetAuthHeader sets the Authorization header to r using the access
+// token in t.
+//
+// This method is unnecessary when using Transport or an HTTP Client
+// returned by this package.
+func (t *Token) SetAuthHeader(r *http.Request) {
+	r.Header.Set("Authorization", t.Type()+" "+t.AccessToken)
+}
+
+// WithExtra returns a new Token that's a clone of t, but using the
+// provided raw extra map. This is only intended for use by packages
+// implementing derivative OAuth2 flows.
+func (t *Token) WithExtra(extra interface{}) *Token {
+	t2 := new(Token)
+	*t2 = *t
+	t2.raw = extra
+	return t2
+}
+
+// Extra returns an extra field.
+// Extra fields are key-value pairs returned by the server as a
+// part of the token retrieval response.
+func (t *Token) Extra(key string) interface{} {
+	if raw, ok := t.raw.(map[string]interface{}); ok {
+		return raw[key]
+	}
+
+	vals, ok := t.raw.(url.Values)
+	if !ok {
+		return nil
+	}
+
+	v := vals.Get(key)
+	switch s := strings.TrimSpace(v); strings.Count(s, ".") {
+	case 0: // Contains no "."; try to parse as int
+		if i, err := strconv.ParseInt(s, 10, 64); err == nil {
+			return i
+		}
+	case 1: // Contains a single "."; try to parse as float
+		if f, err := strconv.ParseFloat(s, 64); err == nil {
+			return f
+		}
+	}
+
+	return v
+}
+
+// timeNow is time.Now but pulled out as a variable for tests.
+var timeNow = time.Now
+
+// expired reports whether the token is expired.
+// t must be non-nil.
+func (t *Token) expired() bool {
+	if t.Expiry.IsZero() {
+		return false
+	}
+	return t.Expiry.Round(0).Add(-expiryDelta).Before(timeNow())
+}
+
+// Valid reports whether t is non-nil, has an AccessToken, and is not expired.
+func (t *Token) Valid() bool {
+	return t != nil && t.AccessToken != "" && !t.expired()
+}
+
+// tokenFromInternal maps an *internal.Token struct into
+// a *Token struct.
+func tokenFromInternal(t *internal.Token) *Token {
+	if t == nil {
+		return nil
+	}
+	return &Token{
+		AccessToken:  t.AccessToken,
+		TokenType:    t.TokenType,
+		RefreshToken: t.RefreshToken,
+		Expiry:       t.Expiry,
+		raw:          t.Raw,
+	}
+}
+
+// retrieveToken takes a *Config and uses that to retrieve an *internal.Token.
+// This token is then mapped from *internal.Token into an *oauth2.Token which is returned along
+// with an error..
+func retrieveToken(ctx context.Context, c *Config, v url.Values) (*Token, error) {
+	tk, err := internal.RetrieveToken(ctx, c.ClientID, c.ClientSecret, c.Endpoint.TokenURL, v, internal.AuthStyle(c.Endpoint.AuthStyle))
+	if err != nil {
+		if rErr, ok := err.(*internal.RetrieveError); ok {
+			return nil, (*RetrieveError)(rErr)
+		}
+		return nil, err
+	}
+	return tokenFromInternal(tk), nil
+}
+
+// RetrieveError is the error returned when the token endpoint returns a
+// non-2XX HTTP status code.
+type RetrieveError struct {
+	Response *http.Response
+	// Body is the body that was consumed by reading Response.Body.
+	// It may be truncated.
+	Body []byte
+}
+
+func (r *RetrieveError) Error() string {
+	return fmt.Sprintf("oauth2: cannot fetch token: %v\nResponse: %s", r.Response.Status, r.Body)
+}

vendor/golang.org/x/oauth2/transport.go

@@ -0,0 +1,89 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package oauth2
+
+import (
+	"errors"
+	"log"
+	"net/http"
+	"sync"
+)
+
+// Transport is an http.RoundTripper that makes OAuth 2.0 HTTP requests,
+// wrapping a base RoundTripper and adding an Authorization header
+// with a token from the supplied Sources.
+//
+// Transport is a low-level mechanism. Most code will use the
+// higher-level Config.Client method instead.
+type Transport struct {
+	// Source supplies the token to add to outgoing requests'
+	// Authorization headers.
+	Source TokenSource
+
+	// Base is the base RoundTripper used to make HTTP requests.
+	// If nil, http.DefaultTransport is used.
+	Base http.RoundTripper
+}
+
+// RoundTrip authorizes and authenticates the request with an
+// access token from Transport's Source.
+func (t *Transport) RoundTrip(req *http.Request) (*http.Response, error) {
+	reqBodyClosed := false
+	if req.Body != nil {
+		defer func() {
+			if !reqBodyClosed {
+				req.Body.Close()
+			}
+		}()
+	}
+
+	if t.Source == nil {
+		return nil, errors.New("oauth2: Transport's Source is nil")
+	}
+	token, err := t.Source.Token()
+	if err != nil {
+		return nil, err
+	}
+
+	req2 := cloneRequest(req) // per RoundTripper contract
+	token.SetAuthHeader(req2)
+
+	// req.Body is assumed to be closed by the base RoundTripper.
+	reqBodyClosed = true
+	return t.base().RoundTrip(req2)
+}
+
+var cancelOnce sync.Once
+
+// CancelRequest does nothing. It used to be a legacy cancellation mechanism
+// but now only it only logs on first use to warn that it's deprecated.
+//
+// Deprecated: use contexts for cancellation instead.
+func (t *Transport) CancelRequest(req *http.Request) {
+	cancelOnce.Do(func() {
+		log.Printf("deprecated: golang.org/x/oauth2: Transport.CancelRequest no longer does anything; use contexts")
+	})
+}
+
+func (t *Transport) base() http.RoundTripper {
+	if t.Base != nil {
+		return t.Base
+	}
+	return http.DefaultTransport
+}
+
+// cloneRequest returns a clone of the provided *http.Request.
+// The clone is a shallow copy of the struct and its Header map.
+func cloneRequest(r *http.Request) *http.Request {
+	// shallow copy of the struct
+	r2 := new(http.Request)
+	*r2 = *r
+	// deep copy of the Header
+	r2.Header = make(http.Header, len(r.Header))
+	for k, s := range r.Header {
+		r2.Header[k] = append([]string(nil), s...)
+	}
+	return r2
+}