Update dependencies

vendor/github.com/prometheus/client_golang/prometheus/build_info.go

@@ -1,29 +0,0 @@
-// Copyright 2019 The Prometheus Authors
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-// http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-
-// +build go1.12
-
-package prometheus
-
-import "runtime/debug"
-
-// readBuildInfo is a wrapper around debug.ReadBuildInfo for Go 1.12+.
-func readBuildInfo() (path, version, sum string) {
-	path, version, sum = "unknown", "unknown", "unknown"
-	if bi, ok := debug.ReadBuildInfo(); ok {
-		path = bi.Main.Path
-		version = bi.Main.Version
-		sum = bi.Main.Sum
-	}
-	return
-}

vendor/github.com/prometheus/client_golang/prometheus/build_info_pre_1.12.go

@@ -1,22 +0,0 @@
-// Copyright 2019 The Prometheus Authors
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-// http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-
-// +build !go1.12
-
-package prometheus
-
-// readBuildInfo is a wrapper around debug.ReadBuildInfo for Go versions before
-// 1.12. Remove this whole file once the minimum supported Go version is 1.12.
-func readBuildInfo() (path, version, sum string) {
-	return "unknown", "unknown", "unknown"
-}

vendor/github.com/prometheus/client_golang/prometheus/desc.go

@@ -20,7 +20,7 @@ import (
 	"strings"
 
 	"github.com/cespare/xxhash/v2"
-	//lint:ignore SA1019 Need to keep deprecated package for compatibility.
+	//nolint:staticcheck // Ignore SA1019. Need to keep deprecated package for compatibility.
 	"github.com/golang/protobuf/proto"
 	"github.com/prometheus/common/model"
 

vendor/github.com/prometheus/client_golang/prometheus/expvar_collector.go

@@ -22,43 +22,10 @@ type expvarCollector struct {
 	exports map[string]*Desc
 }
 
-// NewExpvarCollector returns a newly allocated expvar Collector that still has
-// to be registered with a Prometheus registry.
+// NewExpvarCollector is the obsolete version of collectors.NewExpvarCollector.
+// See there for documentation.
 //
-// An expvar Collector collects metrics from the expvar interface. It provides a
-// quick way to expose numeric values that are already exported via expvar as
-// Prometheus metrics. Note that the data models of expvar and Prometheus are
-// fundamentally different, and that the expvar Collector is inherently slower
-// than native Prometheus metrics. Thus, the expvar Collector is probably great
-// for experiments and prototying, but you should seriously consider a more
-// direct implementation of Prometheus metrics for monitoring production
-// systems.
-//
-// The exports map has the following meaning:
-//
-// The keys in the map correspond to expvar keys, i.e. for every expvar key you
-// want to export as Prometheus metric, you need an entry in the exports
-// map. The descriptor mapped to each key describes how to export the expvar
-// value. It defines the name and the help string of the Prometheus metric
-// proxying the expvar value. The type will always be Untyped.
-//
-// For descriptors without variable labels, the expvar value must be a number or
-// a bool. The number is then directly exported as the Prometheus sample
-// value. (For a bool, 'false' translates to 0 and 'true' to 1). Expvar values
-// that are not numbers or bools are silently ignored.
-//
-// If the descriptor has one variable label, the expvar value must be an expvar
-// map. The keys in the expvar map become the various values of the one
-// Prometheus label. The values in the expvar map must be numbers or bools again
-// as above.
-//
-// For descriptors with more than one variable label, the expvar must be a
-// nested expvar map, i.e. where the values of the topmost map are maps again
-// etc. until a depth is reached that corresponds to the number of labels. The
-// leaves of that structure must be numbers or bools as above to serve as the
-// sample values.
-//
-// Anything that does not fit into the scheme above is silently ignored.
+// Deprecated: Use collectors.NewExpvarCollector instead.
 func NewExpvarCollector(exports map[string]*Desc) Collector {
 	return &expvarCollector{
 		exports: exports,

vendor/github.com/prometheus/client_golang/prometheus/go_collector.go

@@ -36,32 +36,10 @@ type goCollector struct {
 	msMaxAge        time.Duration           // Maximum allowed age of old memstats.
 }
 
-// NewGoCollector returns a collector that exports metrics about the current Go
-// process. This includes memory stats. To collect those, runtime.ReadMemStats
-// is called. This requires to “stop the world”, which usually only happens for
-// garbage collection (GC). Take the following implications into account when
-// deciding whether to use the Go collector:
+// NewGoCollector is the obsolete version of collectors.NewGoCollector.
+// See there for documentation.
 //
-// 1. The performance impact of stopping the world is the more relevant the more
-// frequently metrics are collected. However, with Go1.9 or later the
-// stop-the-world time per metrics collection is very short (~25µs) so that the
-// performance impact will only matter in rare cases. However, with older Go
-// versions, the stop-the-world duration depends on the heap size and can be
-// quite significant (~1.7 ms/GiB as per
-// https://go-review.googlesource.com/c/go/+/34937).
-//
-// 2. During an ongoing GC, nothing else can stop the world. Therefore, if the
-// metrics collection happens to coincide with GC, it will only complete after
-// GC has finished. Usually, GC is fast enough to not cause problems. However,
-// with a very large heap, GC might take multiple seconds, which is enough to
-// cause scrape timeouts in common setups. To avoid this problem, the Go
-// collector will use the memstats from a previous collection if
-// runtime.ReadMemStats takes more than 1s. However, if there are no previously
-// collected memstats, or their collection is more than 5m ago, the collection
-// will block until runtime.ReadMemStats succeeds.
-//
-// NOTE: The problem is solved in Go 1.15, see
-// https://github.com/golang/go/issues/19812 for the related Go issue.
+// Deprecated: Use collectors.NewGoCollector instead.
 func NewGoCollector() Collector {
 	return &goCollector{
 		goroutinesDesc: NewDesc(
@@ -366,25 +344,17 @@ type memStatsMetrics []struct {
 	valType ValueType
 }
 
-// NewBuildInfoCollector returns a collector collecting a single metric
-// "go_build_info" with the constant value 1 and three labels "path", "version",
-// and "checksum". Their label values contain the main module path, version, and
-// checksum, respectively. The labels will only have meaningful values if the
-// binary is built with Go module support and from source code retrieved from
-// the source repository (rather than the local file system). This is usually
-// accomplished by building from outside of GOPATH, specifying the full address
-// of the main package, e.g. "GO111MODULE=on go run
-// github.com/prometheus/client_golang/examples/random". If built without Go
-// module support, all label values will be "unknown". If built with Go module
-// support but using the source code from the local file system, the "path" will
-// be set appropriately, but "checksum" will be empty and "version" will be
-// "(devel)".
+// NewBuildInfoCollector is the obsolete version of collectors.NewBuildInfoCollector.
+// See there for documentation.
 //
-// This collector uses only the build information for the main module. See
-// https://github.com/povilasv/prommod for an example of a collector for the
-// module dependencies.
+// Deprecated: Use collectors.NewBuildInfoCollector instead.
 func NewBuildInfoCollector() Collector {
-	path, version, sum := readBuildInfo()
+	path, version, sum := "unknown", "unknown", "unknown"
+	if bi, ok := debug.ReadBuildInfo(); ok {
+		path = bi.Main.Path
+		version = bi.Main.Version
+		sum = bi.Main.Sum
+	}
 	c := &selfCollector{MustNewConstMetric(
 		NewDesc(
 			"go_build_info",

vendor/github.com/prometheus/client_golang/prometheus/histogram.go

@@ -22,7 +22,7 @@ import (
 	"sync/atomic"
 	"time"
 
-	//lint:ignore SA1019 Need to keep deprecated package for compatibility.
+	//nolint:staticcheck // Ignore SA1019. Need to keep deprecated package for compatibility.
 	"github.com/golang/protobuf/proto"
 
 	dto "github.com/prometheus/client_model/go"
@@ -47,7 +47,12 @@ type Histogram interface {
 	Metric
 	Collector
 
-	// Observe adds a single observation to the histogram.
+	// Observe adds a single observation to the histogram. Observations are
+	// usually positive or zero. Negative observations are accepted but
+	// prevent current versions of Prometheus from properly detecting
+	// counter resets in the sum of observations. See
+	// https://prometheus.io/docs/practices/histograms/#count-and-sum-of-observations
+	// for details.
 	Observe(float64)
 }
 

vendor/github.com/prometheus/client_golang/prometheus/metric.go

@@ -17,7 +17,7 @@ import (
 	"strings"
 	"time"
 
-	//lint:ignore SA1019 Need to keep deprecated package for compatibility.
+	//nolint:staticcheck // Ignore SA1019. Need to keep deprecated package for compatibility.
 	"github.com/golang/protobuf/proto"
 	"github.com/prometheus/common/model"
 
@@ -58,7 +58,7 @@ type Metric interface {
 }
 
 // Opts bundles the options for creating most Metric types. Each metric
-// implementation XXX has its own XXXOpts type, but in most cases, it is just be
+// implementation XXX has its own XXXOpts type, but in most cases, it is just
 // an alias of this type (which might change when the requirement arises.)
 //
 // It is mandatory to set Name to a non-empty string. All other fields are

vendor/github.com/prometheus/client_golang/prometheus/process_collector.go

@@ -54,16 +54,10 @@ type ProcessCollectorOpts struct {
 	ReportErrors bool
 }
 
-// NewProcessCollector returns a collector which exports the current state of
-// process metrics including CPU, memory and file descriptor usage as well as
-// the process start time. The detailed behavior is defined by the provided
-// ProcessCollectorOpts. The zero value of ProcessCollectorOpts creates a
-// collector for the current process with an empty namespace string and no error
-// reporting.
+// NewProcessCollector is the obsolete version of collectors.NewProcessCollector.
+// See there for documentation.
 //
-// The collector only works on operating systems with a Linux-style proc
-// filesystem and on Microsoft Windows. On other operating systems, it will not
-// collect any metrics.
+// Deprecated: Use collectors.NewProcessCollector instead.
 func NewProcessCollector(opts ProcessCollectorOpts) Collector {
 	ns := ""
 	if len(opts.Namespace) > 0 {

vendor/github.com/prometheus/client_golang/prometheus/promhttp/delegator.go

@@ -83,8 +83,7 @@ type readerFromDelegator struct{ *responseWriterDelegator }
 type pusherDelegator struct{ *responseWriterDelegator }
 
 func (d closeNotifierDelegator) CloseNotify() <-chan bool {
-	//lint:ignore SA1019 http.CloseNotifier is deprecated but we don't want to
-	//remove support from client_golang yet.
+	//nolint:staticcheck // Ignore SA1019. http.CloseNotifier is deprecated but we keep it here to not break existing users.
 	return d.ResponseWriter.(http.CloseNotifier).CloseNotify()
 }
 func (d flusherDelegator) Flush() {
@@ -348,8 +347,7 @@ func newDelegator(w http.ResponseWriter, observeWriteHeaderFunc func(int)) deleg
 	}
 
 	id := 0
-	//lint:ignore SA1019 http.CloseNotifier is deprecated but we don't want to
-	//remove support from client_golang yet.
+	//nolint:staticcheck // Ignore SA1019. http.CloseNotifier is deprecated but we keep it here to not break existing users.
 	if _, ok := w.(http.CloseNotifier); ok {
 		id += closeNotifier
 	}

vendor/github.com/prometheus/client_golang/prometheus/registry.go

@@ -26,7 +26,7 @@ import (
 	"unicode/utf8"
 
 	"github.com/cespare/xxhash/v2"
-	//lint:ignore SA1019 Need to keep deprecated package for compatibility.
+	//nolint:staticcheck // Ignore SA1019. Need to keep deprecated package for compatibility.
 	"github.com/golang/protobuf/proto"
 	"github.com/prometheus/common/expfmt"
 

vendor/github.com/prometheus/client_golang/prometheus/summary.go

@@ -23,7 +23,7 @@ import (
 	"time"
 
 	"github.com/beorn7/perks/quantile"
-	//lint:ignore SA1019 Need to keep deprecated package for compatibility.
+	//nolint:staticcheck // Ignore SA1019. Need to keep deprecated package for compatibility.
 	"github.com/golang/protobuf/proto"
 
 	dto "github.com/prometheus/client_model/go"
@@ -55,7 +55,12 @@ type Summary interface {
 	Metric
 	Collector
 
-	// Observe adds a single observation to the summary.
+	// Observe adds a single observation to the summary. Observations are
+	// usually positive or zero. Negative observations are accepted but
+	// prevent current versions of Prometheus from properly detecting
+	// counter resets in the sum of observations. See
+	// https://prometheus.io/docs/practices/histograms/#count-and-sum-of-observations
+	// for details.
 	Observe(float64)
 }
 
@@ -121,7 +126,9 @@ type SummaryOpts struct {
 	Objectives map[float64]float64
 
 	// MaxAge defines the duration for which an observation stays relevant
-	// for the summary. Must be positive. The default value is DefMaxAge.
+	// for the summary. Only applies to pre-calculated quantiles, does not
+	// apply to _sum and _count. Must be positive. The default value is
+	// DefMaxAge.
 	MaxAge time.Duration
 
 	// AgeBuckets is the number of buckets used to exclude observations that

vendor/github.com/prometheus/client_golang/prometheus/value.go

@@ -19,7 +19,7 @@ import (
 	"time"
 	"unicode/utf8"
 
-	//lint:ignore SA1019 Need to keep deprecated package for compatibility.
+	//nolint:staticcheck // Ignore SA1019. Need to keep deprecated package for compatibility.
 	"github.com/golang/protobuf/proto"
 	"github.com/golang/protobuf/ptypes"
 

vendor/github.com/prometheus/client_golang/prometheus/vec.go

@@ -167,8 +167,8 @@ func (m *MetricVec) CurryWith(labels Labels) (*MetricVec, error) {
 // calling the newMetric function provided during construction of the
 // MetricVec).
 //
-// It is possible to call this method without using the returned Metry to only
-// create the new Metric but leave it in its intitial state.
+// It is possible to call this method without using the returned Metric to only
+// create the new Metric but leave it in its initial state.
 //
 // Keeping the Metric for later use is possible (and should be considered if
 // performance is critical), but keep in mind that Reset, DeleteLabelValues and

vendor/github.com/prometheus/client_golang/prometheus/wrap.go

@@ -17,7 +17,7 @@ import (
 	"fmt"
 	"sort"
 
-	//lint:ignore SA1019 Need to keep deprecated package for compatibility.
+	//nolint:staticcheck // Ignore SA1019. Need to keep deprecated package for compatibility.
 	"github.com/golang/protobuf/proto"
 
 	dto "github.com/prometheus/client_model/go"